00:27 How to make a WIFI control car with Nodemcu and Blynk 00:59 Learn how to make a WIFI control car with Nodemcu and Blynk 03:05 This video demonstrates how to make a WIFI control car using Nodemcu and Blynk. 04:22 The video demonstrates how to make a WIFI control car using Nodemcu and Blynk. 07:30 Learn how to make a WIFI control car with Nodemcu and Blynk 09:06 Learn how to make a WIFI control car using Nodemcu and Blynk 11:54 Learn how to make a WIFI controlled car using Nodemcu and Blynk 12:49 Learn how to make a WiFi control car using Nodemcu and Blynk Crafted by Merlin AI.
I also have the same problem problem. I am using 4 AA batteries to power 2 dc motors as back wheels of the car (using a castor wheel for front). The car is not able to work on the battery only. It works perfectly when I connect both the batteries as well as to my laptop via a data cable. Any solutions or fixes?
@@sritu_hobby I also have the same problem problem. I am using 4 AA batteries to power 2 dc motors as back wheels of the car (using a castor wheel for front). The car is not able to work on the battery only. It works perfectly when I connect both the batteries as well as to my laptop via a data cable. Any solutions or fixes?
bro esp8266 is good but arduino has many more features except wifi or else you can look in ardunio wifi shield or instead you can use bluetooth module in arduino but from arduino you can make many project you can give power to arduino using a battery also
I am using 4 AA batteries to power 2 dc motors as back wheels of the car (using a castor wheel for front). The car is not able to work on the battery only. It works perfectly when I connect both the batteries as well as to my laptop via a data cable. Any solutions or fixes?
how come We want to create a manual and automatic dmart vacuum cleaner where are we gonna pin out sa wheels on the driver module or to gizduino board ?
@SriTu Hobby Tech All the connections are right but when I click on any direction the NodeMCU gets turned Off and again it starts after resetting the NodeMCU.I am using 9v battery and l298 driver. Please Help
Thank you for video. I have a question. Can we control it from anywhere? For example I m in one city and that car is in any other city. Can i connect to wifi and control car? If yes please explain
I followed your steps but encountered a problem, the device 'WIFI Car' was not detected online in the 'blynk' application. Please tell me how to solve it
Brother if i buy some products from your store till how much days it has replacement or any warrant or return if the product is not working or damaged and how will you deliver your products i want to know asap
Hello! This Is a very interesting project... I'd like to make the same with more battery autonomy. I'm thinking about a wireless charger for mobile, but does boards and motors works at 3.7v? And if I'd want to power It from 220v, could I use a 5v 1/2A PSU? Any idea? Thanks
@@sritu_hobby sorry my english its bad . You can design another car with adafruit shield v2 and sonar sensor. For the car drive automátic and manual conduction
I have one issue, i am using 12V 5Ah battery. After running motors for some 30 seconds the driver is turning off automatically, any idea why this is happening.
I'm not able to power up my nodemcu without the usb cable when using 9v battery but it works fine with a usb cable connected to a laptop. How can I resolve this?
i do everything but my robot car dosen't work ... T-T its have no anything error but when i press on blynk iot its not working .. can u please reply T__T thx sir
Bro jab joystick ko y button ko forward y kahin bhi move karty hn to car auto run hona start kardyti h control bhi nehi hoti aur wifi bhi diss connect ho jati h😢😢😢
CAN YOU PLEASE HELP ME I have lag and latency problem when I press forward it does not respond immediately and sometimes when i lift my finger of the button its keeps doing the command for a While please help me i need solution for this because it's a school projet thank you
I need more detailed tutorial on connecting the Blynk app. The new version of Blynk is very different, I cannot get the token! Blynk wont find my device even
thank you sritu tech and your team its working😊
My friend, I want to thank you for your help. Congratulations on the channel.
00:27 How to make a WIFI control car with Nodemcu and Blynk
00:59 Learn how to make a WIFI control car with Nodemcu and Blynk
03:05 This video demonstrates how to make a WIFI control car using Nodemcu and Blynk.
04:22 The video demonstrates how to make a WIFI control car using Nodemcu and Blynk.
07:30 Learn how to make a WIFI control car with Nodemcu and Blynk
09:06 Learn how to make a WIFI control car using Nodemcu and Blynk
11:54 Learn how to make a WIFI controlled car using Nodemcu and Blynk
12:49 Learn how to make a WiFi control car using Nodemcu and Blynk
Crafted by Merlin AI.
hello sir It doesn't work if I connect the vin and gnd pins to the power supply, but it works with the cable. Can you help me?
I also have the same problem problem. I am using 4 AA batteries to power 2 dc motors as back wheels of the car (using a castor wheel for front). The car is not able to work on the battery only. It works perfectly when I connect both the batteries as well as to my laptop via a data cable. Any solutions or fixes?
sir your videos is very helpfull
Glad to hear that
Your code has some error which I can't upload in nodemcu the problem is near Include blynk.simple esp8266
Bhai kya problem Aya tha
Kya problem hai bhai
Obrigado, otimo video. Feliz Natal
Thanks you very much this video this helpful for me and my teem.
Your welcome
@@sritu_hobby I also have the same problem problem. I am using 4 AA batteries to power 2 dc motors as back wheels of the car (using a castor wheel for front). The car is not able to work on the battery only. It works perfectly when I connect both the batteries as well as to my laptop via a data cable. Any solutions or fixes?
Could u please send the code for this please?i cant open it in the description
I need code to
I also need
Eres un maestro! Gracias me sirvio y quedo a la primera!!!!
@@sritu_hobby you are a master, I stay at the first try. New subscriber and thank you
Thank you
Does it worh with servo for stearing instead bo motor
And with an esp32 cam you can go anywhere!!!!
Can we just replace the before one with an esp32 or modifications should be done?
Great work !!.....can you please make a video on automatic and manual modes of operating of any one of the actuators using NODEMCU.... please
Very nice video sir can you tell me what to do if i change the driver module to L293d? Please it would help a lot
I want to ask if it is possible to add a seed sowing feature (with servo) and a plant waterer (with mini pump watering)
Did it work??
Please tell me which is better
Arduino uno or esp8266 nodemcu
Esp8266 is good
bro esp8266 is good but arduino has many more features except wifi or else you can look in ardunio wifi shield or instead you can use bluetooth module in arduino but from arduino you can make many project you can give power to arduino using a battery also
I ordered a 10x 10 bread board can u tell me where to put thr wires since I'm out of space and I can't get another one please
It's really amazing
Thank you dude
It's better to use only two motors so that battery will last longer!!
I am using 4 AA batteries to power 2 dc motors as back wheels of the car (using a castor wheel for front). The car is not able to work on the battery only. It works perfectly when I connect both the batteries as well as to my laptop via a data cable. Any solutions or fixes?
hello i love your work. Can you make this robot?, can be control manually and automatically
You going to thank me later, Also Don't forget to install the alignments on the two Front wheels adjusted. You're Welcome!
'Happy Creation' ✌❤👍
Bhai moter driver ke badle 4channel relay module use kar sakte hai
how come We want to create a manual and automatic dmart vacuum cleaner where are we gonna pin out sa wheels on the driver module or to gizduino board ?
I'm getting as device offline in blynk app , can you please help with it.
Please check the blynk auth token
@@sritu_hobby yeah i have checked i have given the right one. And tommorow is my last day of submission.
please help me..im noob....how about i put ultrasonic and get noti from the signal..and the wheels move ...how em
Would this work with a nodemcu v3 lolin wifi esp8266 ch340?
can you build this using arduino with wifi modules?
is this based on internet or wifi?
Wifi
Hello sir.
Can i change the l298n motor and with two bts7960 for huge motor
the code is for 1 driver module, 2 motors. if for 2 driver modules, 3 motors what need to be added ?
Can you tell me the name of the green sheet with squares that you have in the background. I want to buy one too but I don't know the name
@@sritu_hobby Thanks
Can i used node mvu v3but soldering like you
É possivel comandar de qualquer rede ou apenas da rede escolhida?
Sir we can't use old blynk app so make an video of new blynk iot app for wifi car
Ok sure.
Thanks man
Sorry to disturb sir ,my whole car is ready but only blynk iot work is remaining
how much weight can it carry and how much speed will be decreased with increasing weight??
3:40
Bro can we use amptex 12v battery 🔋 and 1000 rpm motor?
12v battery is ok..
@@sritu_hobby nathing will happen to notd mcu?
@@shakthigv8305 5 v is maximum , don't go above it
@SriTu Hobby Tech All the connections are right but when I click on any direction the NodeMCU gets turned Off and again it starts after resetting the NodeMCU.I am using 9v battery and l298 driver. Please Help
9v is not enough
My L298N is not receiving commands from the ESP8266. Please help me understand why it is like this when I did it just like you.
can i know what kind of li-on batteries i can use , do we need use 3.7v 18650 4800mAh only?
it's good
Please use a 9v battery
Thank you for video. I have a question. Can we control it from anywhere? For example I m in one city and that car is in any other city. Can i connect to wifi and control car? If yes please explain
Yes of course
No u can't,the range of the wifi is around 20m!!
I followed your steps but encountered a problem, the device 'WIFI Car' was not detected online in the 'blynk' application. Please tell me how to solve it
Check your wifi details
@@sritu_hobby okay
@@sudbytarmano00did it work?
Brother if i buy some products from your store till how much days it has replacement or any warrant or return if the product is not working or damaged and how will you deliver your products i want to know asap
Check our shop pages
Do we have to enter phone wifi name from which we are controlling it
Batteries kitni der tak chalti hai ??
does it work two buttons at a time?
suppose left+forward
No bro
What if i used esp8266 v3?
Did the cide still working?
Hellow!
Your project is awesome...I want to make it at my home....how much total cost of this project..??
You can calculate it.
Using 9V battery
Can ultrasonic be added to this project?
Yes
Can you send me the code?
My esp8266 is cant connect to blynk cloud what im need to do?
We can control this car from anywhere in this world right!
Battery ko reacharge kese karenge nodemcu se kar skte hai kya
I have onw doubt
Is it necessary to connect mobile and esp to the same wifi network?
nope
Hello! This Is a very interesting project... I'd like to make the same with more battery autonomy. I'm thinking about a wireless charger for mobile, but does boards and motors works at 3.7v? And if I'd want to power It from 220v, could I use a 5v 1/2A PSU? Any idea? Thanks
It works from 5v to 12v. You can use a 9v battery for that.
@@sritu_hobby yes, but It will not charge from wireless charging station...
Bro i don't have battery right now can I use a 12v adapter for testing i will attach a battery later
Ok no problem. Also, you can use a 9v battery
@@sritu_hobby ok thank you
Hello srithuhobby , in getting error” please specify your blynk teplate id and blynk template name “
same, code is wrong
Hello you can layout with adafruit motor shield v2 and sonar sensor automátic drive y and manual. Can be good proyect
@@sritu_hobby sorry my english its bad . You can design another car with adafruit shield v2 and sonar sensor. For the car drive automátic and manual conduction
@@sritu_hobby I am wacht your site its good tutorials
Can I use this programing with new blynk iot
For that, you can change some code lines. Don't worry I'll upload that video soon.
Upload a vedio in this topic very fast plz under 5 days plz plz plz plz
I have one issue, i am using 12V 5Ah battery. After running motors for some 30 seconds the driver is turning off automatically, any idea why this is happening.
Please use a 9v battery
@@sritu_hobby Can you give an explanation as to why I need to use a 9v battery when the input voltage can be 12v for the driver?
I'm not able to power up my nodemcu without the usb cable when using 9v battery but it works fine with a usb cable connected to a laptop. How can I resolve this?
it's not possible..
Can I use esp32s 38pins beside of 8266
Yes
Hello sir i lost the WiFi and program control both plz reply if u can help in correcting it
i do everything but my robot car dosen't work ... T-T its have no anything error but when i press on blynk iot its not working .. can u please reply T__T thx sir
Bro which code we must upload node mcu code or Blynk code plz replay fast
view first view
@@sritu_hobbyur wlcm
how to connect wifi module with l293 for the same project
helo.... where is the program description link, has it been removed?
srituhobby.com
Can i do it with esp32
Yah
Can it connect to one dc motors only?
@@sritu_hobby the code need to change or not?
@@sritu_hobby can you explain how to change the code
Bro jab joystick ko y button ko forward y kahin bhi move karty hn to car auto run hona start kardyti h control bhi nehi hoti aur wifi bhi diss connect ho jati h😢😢😢
Please explain the way in which we have to connect this car to phone or tab how it will be connected to bľink app to that code?
Have you found the solution yet?
Sir,mere coading me dikat aa raha hai
Issme ESP8266 file not found aa raha hai
Please kuch bataiye
Solution
can you make a video on how to make this car using aamotor shield
I'll make it
@@sritu_hobby have you make it
Sir compline nahi ho raha board mai yahi board lga Jo aapne lagyaa
the code link is not working
bro wifi ssid code antey amiti adhi mana wifi name aa
pls bro fast ga reoly pattu
What if i use 7.5 volts instead of 7.4?
My nocemcu is taking 10 × 11 dots in bread board, means it takes all space (c-l) what should I do?
You can use two breadboard
@@sritu_hobby all done, but whin Turing on the car it doesn't show wifi connection to connect. What to do?
I have used nodemcu version 3
and blynk app which you used is not available for use
so I had done things with new blynk app
Please check your WIFI details and blynk auth token
@@sritu_hobby done everything is Allright but the same thing.......
Wifi network not showing
i want to ask, i already follow all the step and the code, but why my wheel is not syncron with the code
Try again
Bro can you make a drone with node mcu wifi modulor
I'll make it
It's showing error NO SUCH FILE OR DIRECTORY which library we want to install
I have used 9v battery and everything is dump properly but at the end the car does not move sir please help sir there is Wednesday project demo sir
Check your Blynk auth token
@@sritu_hobbyBlink is connected
Hello sir❤
I hope your well.❤
I want to do this project with esp32 instead of esp8266 is it possible?
i am also doing with esp32
Can i use esp32 insted of 8266 ??
Yes
Can we control it from anywhere of the world using internet?
Yes of course.
Can I do this with rechargeable batteries?
It's ok
Does it need any wifi network
Motor on nahi ho rahi hai hotspots ok he or bettery ok he please help me 😮
SIR CAN YOU PLZ TELL WHAT CHANGES WE HAVE TO DO TO CONTROL IT WITH THE NEW BLYNK IOT
I'll upload this video tomorrow.
@@sritu_hobby Sir when you will upload
Please wait
bro my mcu board not connect or no found any wifi router its the problem or any other issu please help me man
Please check your wifi details and blynk auth token
Where I get this auth code I don't recieve any mail from blynk
Check your blynk app sign up email
On my L298N motor driver ENA and FNR are blocked by something specifically some black things or blocks
CAN YOU PLEASE HELP ME
I have lag and latency problem when I press forward it does not respond immediately and sometimes when i lift my finger of the button its keeps doing the command for a While please help me i need solution for this because it's a school projet thank you
Don't worry. I'll upload the new blynk app project today.Please wait.
I need more detailed tutorial on connecting the Blynk app. The new version of Blynk is very different, I cannot get the token! Blynk wont find my device even
Please check my channel
can we make drone from nodemcu
este proyecto se consideraría un sistema embebido??
English???
can i use an 2200mAh battery for this?
Yah
wud this work with an esp32?
esp32(nodemcu )
Yes but you must change the code.
Bro I don't know how to do coding in the car you can make a video
Please visit our basic videos
Only node mcu board light blinking tt motor not working
Can we use esp32
Yah of course. But you have to change the code