I just received mine and yeah it does sag out easy if you start trying to do powerloops etc after about a minute or 2 of flying. Had it black out a few times
Great information, Ed. I've got this quad in the cart at BetaFPV. Just checking out some information b4 I hit the Buy button. Been flying the DJI FPV & Avata, but I wanted something I could fly indoors. And stability was a deciding factor. Been flying a beat up Tinyhawk 2 and wanted to keep the digital aspect of it.
Hi, i got a question. I cant seem to get rssi and LQ on my goggles but i do have 300 rssi n 300 LQ shown on the full crsf module any idea what might be the problem? I see the rssi set on aux 8 in betaflight.
Haha it's this mount: amzn.to/3r4TnCY clamped to a c-stand boom arm: amzn.to/3qZ1Mrx The LED light on top is also attached to the boom arm using this: amzn.to/3NlDBel
The MicroUSB cable? You can use the right angle adapter the drone comes with to fit it into the port without having to bend it. If you're missing the adapter, it's here: amzn.to/3PbZ7UX
@@EdRickerVlogs it’s more complicated than crossfire, but honestly, once you figure it out if all click. It’s way easier also than when I got into it a couple years ago. It really shines for use in micros like this IMO. Everything on board 💯 awesome.
I wish they went with a better flight controller and connected the vtx to the 5v pad so that we could get a bit more flight time and not worry about losing video.
@@EdRickerVlogsou answered your own question the 5v pad gives 5v all the time, the vtx is connected to the battery, when it sags bellow 3.1v you lose video, they did it this way because the fc can't handle the amp. So the way it comes from betafpv you get 2:40 to 3m tops and the last 30s you can't do punch ups or you are going to lose video, what I did was use a dc-dc stepup and I use 600mah lipos that way I fly almost 5m.
@@EdRickerVlogsever seen a 1s lipo with 5v...try to power a fc with 1s lipo and probe the 5v pad, you get 5v, it's just the fc on the meteor cannot handle the amps draw.
BetaFPV Meteor75 Pro HD: bit.ly/3MKuS6r
Analog Version: bit.ly/3WAFsjL
I just received mine and yeah it does sag out easy if you start trying to do powerloops etc after about a minute or 2 of flying. Had it black out a few times
Great information, Ed. I've got this quad in the cart at BetaFPV. Just checking out some information b4 I hit the Buy button. Been flying the DJI FPV & Avata, but I wanted something I could fly indoors. And stability was a deciding factor. Been flying a beat up Tinyhawk 2 and wanted to keep the digital aspect of it.
Sweet review , just got one . cant wait to fly it .
Hi, i got a question. I cant seem to get rssi and LQ on my goggles but i do have 300 rssi n 300 LQ shown on the full crsf module any idea what might be the problem? I see the rssi set on aux 8 in betaflight.
Thanks for the helpful video
Mine just spins in circles or flips over when I hit the throttle can you show the motor settings?
Can the drone connect with the beta fpv goggle and controller?plz i need an answer right now!!
No, it's a different video transmission system (Walksnail)
Pretty awesome a 1s quad can fly digital! I haven't bought into the Avatar system, but it's looking good!
For sure. 52 grams all up weight with HD is pretty great
What's the real difference between digital and analog?
sir not drone related. how were you able to mount that sony cam on top? hehehehe
Haha it's this mount: amzn.to/3r4TnCY
clamped to a c-stand boom arm: amzn.to/3qZ1Mrx
The LED light on top is also attached to the boom arm using this: amzn.to/3NlDBel
@@EdRickerVlogs thank you sir hehe
Frf
1 St comment...eeee😁😁😁
Weee!
@@EdRickerVlogs eeeee🤩
Superb 👍👍👍
Does anyone know how can I adjust the camera angle?
Ed is in his sideburns era
Haha I bring them out every few years.
On the analog version can you install a walksnail vtx?
I think you could.
Nice !!!
Thanks!
Just got mine by betafpv Ed . I’m definitely loving it . This little whoop is definitely a titan. 🦾
Nice 👍 awesome bro!
What USB cable did you use? I haven't found one small enough to fit.
The MicroUSB cable? You can use the right angle adapter the drone comes with to fit it into the port without having to bend it. If you're missing the adapter, it's here: amzn.to/3PbZ7UX
It didn't come with one. Wow thank you! I will get one of those. Hah, i shaved a usb cable down and got it to fit perfectly.@@EdRickerVlogs
👏👏👏👍👍👍
I love mine. I got the ELRS version.
nice! I need to try ELRS soon, all my buddies love it.
@@EdRickerVlogs it’s more complicated than crossfire, but honestly, once you figure it out if all click. It’s way easier also than when I got into it a couple years ago. It really shines for use in micros like this IMO. Everything on board 💯 awesome.
Can you help me with binding Meteor75 Pro elrs with Radiomaster Zorro (elrs 2.3.0)?
To advanced for me 😢
You can fly it how you want to. If you need Angle mode for stabilization, there's no shame in that!
Love it, ordered it.
Nice!
I wish they went with a better flight controller and connected the vtx to the 5v pad so that we could get a bit more flight time and not worry about losing video.
How would that help? The 5v pad can only supply up to 5 volts. It doesn't provide more volts than the battery has left. It can't create volts.
@@EdRickerVlogsou answered your own question the 5v pad gives 5v all the time, the vtx is connected to the battery, when it sags bellow 3.1v you lose video, they did it this way because the fc can't handle the amp.
So the way it comes from betafpv you get 2:40 to 3m tops and the last 30s you can't do punch ups or you are going to lose video, what I did was use a dc-dc stepup and I use 600mah lipos that way I fly almost 5m.
But a 5v pad regulates higher voltages down, not lower voltages up.
@@EdRickerVlogsever seen a 1s lipo with 5v...try to power a fc with 1s lipo and probe the 5v pad, you get 5v, it's just the fc on the meteor cannot handle the amps draw.
@@nunogomes5926 I don't know what you're saying either...thanks for stopping by