Sir Driving gear(small-12 teeth) aur driven gear( big-24 teeth) ke bichme backlash rakhna he to hame konsa gear ki module ki hisab se rakhna he. Sir plz example Sath bataiye.
Sir can u explained , how u have arrived at the formula for calculating the backlash = 0.6 * teeth module . Will it be applicable for the newly machined gears only ?
Need a question on the backless. If drive and driven gear have different module so how we calculate accepted backless between both gear teeth. Pls suggest.
Sir two gaers(gear and pinion) have a two different module because (M=D/T) so which module taken to the find out the backlash (gear module or pinion module)
Dear Tarun Thank you for so nicely explaining and giving basic information about gears specially in hindi I really appriciate well done I have one query if we calculate backlash and root clearance with module then what is the tollerance
Hello sir if ek pinion usme 24 teeth ,pcd h 200 . uske Saath me gear h usme 126 teeth pcd 1000 to uska root clearance nikalne me koun SA module use kiya jayega
Very nice n very useful video. Thanks
Most welcome brother
Please like and subscribe there are number of such type of videos in this channel
Very Basic, It can be very deep
So nice sir...
Thanks for making such type of informative video for those,who r not mech engineer& he is working in Cement Industry.
Most welcome brother please like and subscribe.
Very nice video ye koi mahi batata h best video
Very Informative..
Thankyou
Very nice good discussion your talking is very good
good describe
Thanks proud of you and continue to new technically video's
Thanx for your love and support brother stay connected please subscribe and press bell icon There are number of such type of videos in this channel
As I'm working in steel industry, so this information is much more useful ..good job sir.
Plz Subscribe brother there is a lots of videos in my channel
Playlist Industrial and technical
Aapki company me koi vecansy hai kya
Plz sand your number
Very useful Post sir....
Thanx for watching please subscribe there are number of such type of videos in this channel.
Too good video sir
Thanx for watching
great ..👏👏👏
Thankyou
Thanks nice information
Your videos are really beneficial.. continue the same affort really appreciate it
Thanx for watching please subscribe there are number of such type of videos in this channel stay connected.
Very helpful v in my working place.
Thanx for watching please subscribe there are number of such type of videos in this channel.
Stay connected press bell icon for notifications
Again thank you so much for valuable information.
Most welcome
Very nice.
Thankyou
Informative bhai
Thanx for watching
Awesome vedio...👌👌👍
Thankyou so much please like and subscribe ❤️
Very helpful vedio clip sir 😍😍
Thankyou Shankar ji
bahot badhiya 👍
Dhanyvaad
Thank sir ji
Most welcome
Thank You Best Information. .
Thankyou so much please like and subscribe ❤️😊
Bahut jada use full h dear
Thanx dear
Super Explanation
Thanx for watching please subscribe if really you like it
Good information
Thanx for watching please subscribe brother
Good explanation
Thankyou so much
Thanks bro good work
Most welcome brother
Very helpful
Please like & subscribe
Sir can we measured module physically on gears, can you show it in this drawing
Sure you can measure it
Thanks so much
Bhaut badiya sir
Thanx for watching please subscribe
AGAR KISI GEARBOC KI Cd ka pta ratio ka pta h to no of teeth kaise nikaale
thak you for this valuable information.
Please subscribe my channel there are number of videos like this
Best he brother well done full support
Backlash k स्पेलिंग गलत हो गया है मित्र हड़बड़ी में
@@superfaststudyexperiment hm dekha maine hadbadi main avi kabi ho jata he usko sudhar na badi bat hoti he
Very useful for me...
Thanx for watching please subscribe there are number of videos like this in my channel
@@superfaststudyexperiment I already subscribed
Sir
If we have to develop 16 teeth gear an 49 teeth reduction gearbox how to calculate
Thank Sir ji......
Sare dought clear ho gya sir thank you sir
Thanx for watching please subscribe
Very gud bhai
Thankyou bhai
oo. thank you very much
Most welcome 🤗 please like and subscribe.
It is very helpful me
Thanx for watching brother
Thanku and very gud
Most welcome please like & subscribe.
Sir 0.06 and 4.5 why multiple kartehne
Thanks bro 👍✌️✌️
Most welcome
Nice information...
What is the minimum allowable root clearance and backlash.
👍👍👍
Thanks🙏
Most welcome
Good, how to compensate root clearance either by changing centre distance or changing root diameters?
Thanks ❤
Welcome brother
Mast he bhai
Subscribe kar dia hay sir
Thankyou ❤️ 😊
Thank you...brother
Most welcome brother 😊 ❤️
nice
How do we adjust Backlash by highlighting three teeth on the driven gear?
Can we use this formula for all types of gears?
Good info
Thanx for watching please subscribe.
You are genious
Thankyou so much 😊❤️
Sir can u plz suggest the solution
We are facing gear tooth failure in spur gear and last within a month we have replaced total 3nos gears
thank you sir ...hum aapka video dakka clooer ka girth gear alignment kiya
it's proud movement for me that my viewers do Great and Big jobs in their respective field. Great job brother
Kitne Tpd ka cooler hai
@@superfaststudyexperiment 100 tpd
hum aapka video daily dakta hai
4.5, 0.06 ISO STANDARDS he ?
It can apply for all gear ?
1:57 Module: Pitch circle diameter in mm / Number of teeth
Is this is also aply in helical gear
nyc
Thankyou so much
👌
Thank you ❤
You're welcome 😊 please like and subscribe
Super
Thankyou so much
Is it same For Worm gears and spiral gear
Thq ji sir
Most welcome please like and subscribe.
❤❤❤
very clearly and briefly explained , But some small spelling mistakes in the text
Jaldbaji me speling mistake ho gaya hai apne sahi kaha
Great
Thanx for watching please subscribe
Thanks❤❤❤ 🙏🙏
Most welcome brother please subscribe there are number of such type of videos in this channel
Good
Thanks
👍👍👍👌👌👌😊
Thankyou
Can't understand the module calculation because how backless is calculated with 50mm little confused
🎉🎉
Takeup pulley alignment of gear box and drum pulley par video banaiye
Bilkul banane ki kosis karunga Mitra
How many methods of taking backlash?
Hello clearance nikalne me pinion and gear me se kiska module use karenge
Thx
Most welcome please subscribe
Sir Driving gear(small-12 teeth) aur driven gear( big-24 teeth) ke bichme backlash rakhna he to hame konsa gear ki module ki hisab se rakhna he. Sir plz example Sath bataiye.
Dono hi gear agar mesh me hai to unka module same hi hoga mere dost
Sir can u explained , how u have arrived at the formula for calculating the backlash = 0.6 * teeth module .
Will it be applicable for the newly machined gears only ?
Got answer or not,,
Need a question on the backless. If drive and driven gear have different module so how we calculate accepted backless between both gear teeth. Pls suggest.
Firstly if two gear are in mesh it is necessary that both of them have same module.
@@superfaststudyexperiment Ohh I understand.
Thank you sir
Most welcome
Sir two gaers(gear and pinion) have a two different module because (M=D/T) so which module taken to the find out the backlash (gear module or pinion module)
Dono gear Jo mesh me hote hai unka module same hi rehta hai alag alag nahi rehta
4:40 Backlash: 0.06 X Module
Dear Tarun Thank you for so nicely explaining and giving basic information about gears specially in hindi I really appriciate well done
I have one query if we calculate
backlash and root clearance with module then what is the tollerance
👍👍🇮🇳
5:07 Root clearance: 4.5 X Backlash
Sir pitch circule teeth ke top se yani gear ke outer dia se q nahi lete
Nice
Most welcome
Sir, please tell me,
Which gear we can choose for module,
Pinion,or girth gear (small gear or big gear).
Both have same value you can select any one
If my drive gear is small and driven gear is big for which one I should calculate backlash on those condition
Thanks
Most welcome please subscribe There are number of such type of videos in this channel.
Sir endfloat kia hota hy
What's the 4.5 mm value
What is 0.06 and 4.5 ?
plz describe.
Tq bro
Most welcome
sirji pitch circle dia kaise nikalna hai??
Pls make a vedio on details of form error, total error and angular error of gear profile and Gear lead. I should be very thankful to you.
I will try to make video on it
Sir eye jo app bola ki back lesh ke formula 0.6×module
Sir kon se Gear ki module lenge
Spur gears
Module m.. no. Of teeth se jo divide kr re h hm..wo teeth kiska hoga?? Drive gear ka ya driven gear ka??
Brother kabhi bhi jab do gear mesh me hote hai unka module same hota hai.
Kisi ka bhi le lo aap same आयेगा
Bike ka engine ka Torque 1 Newton metre Hai To Uske wheel (tyre) Mein Kitna Newto metre torque lagega torque badega ya gatega
Hello sir if ek pinion usme 24 teeth ,pcd h 200 . uske Saath me gear h usme 126 teeth pcd 1000 to uska root clearance nikalne me koun SA module use kiya jayega
Jab bhi 2 gear mesh me hote hai in dono ka module same hota hai