Nice to see Rahm again, and that he is well. I have the same Geist product and have used it on the steering wheels of two cars so far. They really do look like new wheels now. I had nothing to lose, so I experimented by using this product on a non-leather wheel. The wheel on our Fiat Scudo work-van was worn to the bare foam on the top half of the wheel, and though the results weren't 100% perfect, at the very least the rim is matt black again, and looks good from a few paces away, and when looking at the wheel from the outside through the closed windows.
I used to do this when I did interior trim restorations for the motor trade. I used a SEM water based paint/dye and basically did exactly the same process. If you could be bothered to mask dash, steering wheel controls etc then finishing with an airbrush gave the best results.
Perfect timing. I really need to do this to my Nissan Pathfinder on the steering wheel and the shift handle. Now seeing that it's not that difficult to do yourself with adequate and acceptable results, I will definitely be giving this a try.
For those saying this is a gimmick you obviously haven’t priced an oem replacement steering wheel plus the cost to have it installed including swapping the air bag if you had you would definitely look at this as a cost effective alternative 😳
can you use this on car seats? and will the colour rub off when you sit down? silly questions, but just would like to know as I have an 8 yr old Audi S4 and the driver seat is a little worn....rest are ok
Jon, slightly off-topic but does the Golf still have the bottle opener in the centre console cup holder cubby? The mk6 Golf has a nice, solid roomy interior for a car of its size. Excellent quality materials and built to last, but the carpets are awful to vacuum. They do feel special to drive, though.
Hi, someone applied detailing product on my steering wheel and its been extremely slippery which is dangerous because sometimes it slipped out of my hand, it's been like this for about a year and don't know what to do, it's leather. How do I get rid of the slipperiness and make it normal or mildly sticky again?
@@ForensicDetailing thank you so much for your knowledge man! Number one detailing channel! BTW would you know the best spray sealant that's anti-dust? I got a black car
Depends on grit and how much I sand m8. If in doubt do not sand. Remember why you sand. To create a smooth feeling, remove roughness. If you don't understand why you sand then don't sand or else you could go wrong.
@@ForensicDetailing Okay, but if I don't sand, will the paint adhere to the steering wheel? and I only have a piece on the top of the steering wheel that feels rough. is it okay to only use the 1200 sandpaper or will the result be less?
Nice to see Rahm again, and that he is well. I have the same Geist product and have used it on the steering wheels of two cars so far. They really do look like new wheels now. I had nothing to lose, so I experimented by using this product on a non-leather wheel. The wheel on our Fiat Scudo work-van was worn to the bare foam on the top half of the wheel, and though the results weren't 100% perfect, at the very least the rim is matt black again, and looks good from a few paces away, and when looking at the wheel from the outside through the closed windows.
I used to do this when I did interior trim restorations for the motor trade. I used a SEM water based paint/dye and basically did exactly the same process. If you could be bothered to mask dash, steering wheel controls etc then finishing with an airbrush gave the best results.
Perfect timing. I really need to do this to my Nissan Pathfinder on the steering wheel and the shift handle. Now seeing that it's not that difficult to do yourself with adequate and acceptable results, I will definitely be giving this a try.
Looks good but remember to pay attention to the back of the wheel just because you can’t see it doesn’t mean it doesn’t need doing
The hairdryer is such a universal tool, it saved me many times over
when you see something that makes you want to try it - I think that is a good test - the wheel looks great
Thank you Rahm and Jon👍
For those saying this is a gimmick you obviously haven’t priced an oem replacement steering wheel plus the cost to have it installed including swapping the air bag if you had you would definitely look at this as a cost effective alternative 😳
Any idea or tips for doing this on a red stiching steering wheel? Maybe masquing the stitching? Best regards
Thin masking mate
since you don't have light-boxes, you should have shot it outside
can you use this on car seats? and will the colour rub off when you sit down? silly questions, but just would like to know as I have an 8 yr old Audi S4 and the driver seat is a little worn....rest are ok
I think they have kits for the seats but in theory you could yes
@@ForensicDetailing appreciate the response, I’ll take a look on their website. Great vid. And in one take. Epic.
Jon, slightly off-topic but does the Golf still have the bottle opener in the centre console cup holder cubby? The mk6 Golf has a nice, solid roomy interior for a car of its size. Excellent quality materials and built to last, but the carpets are awful to vacuum. They do feel special to drive, though.
Ill check m8.
Hi, someone applied detailing product on my steering wheel and its been extremely slippery which is dangerous because sometimes it slipped out of my hand, it's been like this for about a year and don't know what to do, it's leather. How do I get rid of the slipperiness and make it normal or mildly sticky again?
rubbing alcohol mate 30-70 with water, apply and wipe off with clean microfiber towel.
@@ForensicDetailing thank you so much for your knowledge man! Number one detailing channel!
BTW would you know the best spray sealant that's anti-dust? I got a black car
Brilliant video thank you :)
This looks to be a great product 😊.
An interesting unusual product that seems to do the trick.
Jon I recognize that other gent sitting down with his hat on backwards. He’s from Chicago Auto Pro’s.
Is it safe to sand a perforated steering wheel or do you sand off the texture?
Depends on grit and how much I sand m8. If in doubt do not sand. Remember why you sand. To create a smooth feeling, remove roughness. If you don't understand why you sand then don't sand or else you could go wrong.
@@ForensicDetailing Okay, but if I don't sand, will the paint adhere to the steering wheel? and I only have a piece on the top of the steering wheel that feels rough. is it okay to only use the 1200 sandpaper or will the result be less?
Great product!!!
doesn't the horn need to be cleaned too? where the VW emblem is? feel if you're gonna do the wheel, do the whole wheel. just a thought.
In this case no but in other cases yes potentially
Still looks too shiny to me
Use flash and a srubbing brush gives exactly the same results at a tiny fraction of the cost.
Exactly what I need for The Wookie!!
Where was the restoration? Looks like its a 5 year old car getting a shine, what about a 20 year old wheel with leather peel?
The Golf is twelve years old. But being a Volkswagen, it doesn't look one day of it.
Then you wouldn’t use this method! Wheel would need re-trimming instead.