Tips and Tricks Every Woodworker Should Know - Vol. 2
Вставка
- Опубліковано 30 тра 2024
- Head to www.squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES
▸ More Woodworking Tips - • Perfect Miters and 3 O...
PROJECT VIDEOS
▸ Coffee Table - • Designing and Building...
▸ Lounge Chair - • How to Build a Lounge ...
▸ Desk - • How to Build a Desk - ...
In this video we cover 4 woodworking tips which were submitted by viewers like you. The tips include a trick for getting perfectly flat panel glue-ups, how to rip a board with crooked edge safely on a table saw, how to find the centers of boards and evenly divide them into sections, and how to precisely measure an inside dimension.
WOODWORKING PLANS
▸ Plans Available Here - www.foureyesfurniture.com/plans
▸ Plans Example Chapter - • Woodworking Video Plan...
FEATURED TOOLS
▸ Woodpeckers Tools (all the red stuff) - bit.ly/wpfoureyes
▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP
//HOW TO SUBMIT A TIP//
Submit your woodworking tip by emailing it to us at tips@foureyesfurniture.com
Here’s what to include:
1. In the subject line of your email, include a short description of tip (example: “How To Chop an Onion w/out crying” )
2. In the body of your email, include a detailed description of your tip. If you have pictures or video, all the better. Anything that will help us to better understand your tip is appreciated. Don’t worry about high production on this stuff. We’ll take care of that.
3. Where you’d like to be credited. Your Instagram Handle, your UA-cam Channel, just your name…or even anonymous. Just let us know.
Thank you to those who submitted tips for this episode
Flat Panels - Chris and Shaun from Foureyes Woodworking on UA-cam.
Ripping Crooked Edges - Ivar Husa
Find Centers - Brandon Mueller - / @tedeisner822
Inside Measurements - Bill Parrish - Навчання та стиль
▸ Tips are great, but there's no substitute for actually building stuff. Check out our plans - www.foureyesfurniture.com/plans
▸ ...or just watch more woodworking tips - ua-cam.com/play/PLg7QrqfzwiFrpIAYDnIpKoGneqc7JG3Ai.html
You lost a credibility when you used a pen. You never use a pen or marker in woodworking !!! Pencil only.
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ua-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
The author does like to ua-cam.com/users/postUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz from scratch, shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practice the full stack project, is still great.
You should keep making the tape ball bigger and bigger each time you do these videos.
That's what I was thinking. Only the tape should be used for something first before making a ball. You can also make cubes or pyramids with tape, but is much more difficult with used stuff. Bored painters watching paint dry here.
@@billhill3526 I use tape a lot and when possible I use it twice or even three times before discarding it. I think now though I'm going to start a tape ball ☺👍
Classic Airplane, Naked Gun humor 🎈
Agreed
I agree, it would be hilarious if they could keep tossing it back and forth when it's at epic proportions.
I'm a retired wood worker both fine furniture and architectural millwork. 60 years man and boy and I have ALL my fingers. This is first video I have seen that is smart and has first class advise. The in out thing with the jointer I have been doing for 40 years. Note: Check your joints by dry fitting the panel and lightly clamp one end and see if there are gaps in the joints at the other end. You should be able close the open end with you hands. Do not force a gap closed or you will induce a stress in the panel. Now allow the glue line to dry for a number of days so you are not sanding wet raised grain which will shrink later.
Watching Chris cut random kerfs in to a nice piece of walnut just to use for an example hurt my heart as a woodworker who struggles to find quality hardwoods....
You’d be pretty bummed to know how much food is wasted to advertise a Big Mac to you.
Yep. I felt the same pang. Walnut? He wasted a beautiful piece of Walnut? Why not cheap pine or aspen or poplar? Tell you what, guys, just ship to me all your Walnut scraps and I’ll ship you all the pine you want.
@@jus6681 is a Big Mac REALLY food though? Lol
A variation on the sticks for measuring the inside. Is to not clamp them together at all, because when you remove sticks they could either jamb in place or cause the clamped sticks to move slightly. Instead throw away the clamp and simply scribe a line across the sticks, remove the sticks and realign when you need to measure or use it as a jig. it will always be accurate from that point forward, if you have a lot of measurements to make don't scribe the sticks instead use painters tape on the sticks and draw your line(s) on that.
The inside measurement is a good opportunity to not measure it at all. Use the two stick method and use the clamped stick to set your saw or whatever it is you are doing. It is easy to fall into the trap of believing you have to measure everything - I always find ways of measuring as little as possible. The ways of finding the centres of the board and the circle are great examples of this: we don't care how wide the board is we just want it halved.
Totally agree. No ruler or tape measure will ever be as accurate as a story stick.
Exactly. If I’m getting this correct, the key is to gauge not to measure, in woodwork. We almost never care about what exactly the measurements are while we do care a lot about the precision of gauging and cut.
I do that with two combination squre rulers (6, 12, 18, 24 inches), and use a cut off finish nail to keep them in register and brass stair gauge to clamp them.
Getting into the truly fine work... with curves, organic shapes, and bending... often we don't even particularly care about "square" or "straight" either... A line of symmetry can help balance something that needs to stand upright on it's own, but that doesn't necessarily even require a register to "vertical" or "horizontal" exactly...
Ships were built with ticking sticks, lengths of cord, and a lot of old fashioned "judgment"... as were truly old-school carriages.
Learning to match and batch cuts and shapes saves a LOT of math... as does "solving it graphically" instead of bothering with a bunch of numbers that are going to be "off" anyway (see anything to do with pi)...
...AND if you can get to bending, you're one of a remarkably select group of artisans that seem to accomplish the impossible. ;o)
Was going to say the same, that's a great trick lol, and it cuts out the measurements altogether.
Awesome tips. Much Thanks guys.
Hey guys, really enjoying your tips and tricks videos. No matter how many years you have spent in the workshop, your never too old to learn something new. Keep'm coming.
Nice illustration for the “in/out” / “up/down” method for the flat panel glue up!
Mind blown - finding the center of a circle and the inside the dado/kerf's are amazing tips! Cheers!
Huge "Thank you!" for this video! Especially the tips about alternatives for jointers (since I only have a table saw). I'm eager to try these on my next project!
This is my first time seeing one of your videos and I am impressed by how concise you are. I've seen more information in this video, than I've seen in other videos that are 4 or 5 times as long. I'll keep watching your videos. I won't fall asleep like the others!
Great video. I appreciate the fact that you not only provide the tips but demonstrate them as well. For beginners like me this is EXTREMELY helpful. This is the reason I subscribed. Thanks
Seriously... this video is PURE GOLD!
Glad you shared my tip for creating a perfectly straight board of almost any length. It was shared with me by a cabinet maker many years ago. Too, by removing small amounts from alternate sides will 'take out' any bowing as a result of wood removal.
Yea
Love the added illustrations during the table saw/board straightening tips.
I absolutely loved your video. This is the 1st one I watch from Foureyes. Your graphic explanations as well as the failed cuts (table saw) made this so easy to understand. Thank you!🤓
This series is super interesting and helpful. Please keep 'em coming!
New favourite channel. Thanks for this guys.
Awesome tips. Thanks guys
These simplest best and ANIMATED explanations I've seen for these tips so far.
❤❤❤❤❤
Really appreciate it!!!
Another great tips’ video! Loving this series you’ve started!
Good tips and the dry humor was a plus.
That first tip is absolute gold- thanks!
Great tips. That last one using two strips of wood was so simple I wonder how I’ve never seen it or thought of that. GREAT TIP
I never knew people could be so awesome and so corny at the same time. Mind blown!
No jointer for me.....YET. So, I love the idea of writing "up" and "down" on the boards to make them fit together correctly. I wish I would have seen your video BEFORE I finished the desk I just built for my son. The desktop is comprised of five 1x6 boards and while they are "close" to being joined well, there are gaps. I had to overcome that as best I could by squeezing them together with a large clamp and then doubling up on the pocket holes to hold them in place. It worked, but it is far from ideal. I'm going to build another desk to try to sell and I'll be incorporating your idea for that one! I'm looking forward to getting much better results!
Your other tips were awesome as well! Thanks so much for these! Great stuff!
What a simple and effective tip!! Thanks for posting this!
Love that last tip. Bill, you are the man!
Good stuff! As a 2nd gen craftsman and dedicated expert in many woodworking techniques and practices, I like your style!
I’d like to add to the ‘inside dimension’ discussion- for small areas like inside a cabinet, I use a 123 block (a machinist’s trick. A 1”x2”x3” block) and measure back to the block. And for longer dimensions like measuring a wall for crown, I measure 40”, 50”, 60”, etc. out of one corner and then measure back to that mark.
Doable as a donut 😅
This is what I've been doing for 35 years. 😃 It's never failed! Cheers 🍻
Yeah, and it's dead simple! 😂😂😂😂😂 I could do it in my sleep with both hands tied! 😂😂😂 Seriously though, I'm gonna save that and earnestly try to get it down!
Another great walkthrough! Thanks for the tips!
Now that is some great info I can use with my limited equipment. Great explanation. Thanks!
Think I've found my best two friends in the world. Brilliant
For inside measurements, using a tape measure, push the hook against one side and measure out towards the center and make a tick mark on an inch line. Any inch, doesn't matter. Now push the hook against the other side and measure out to your tick mark. Add the two measurements together.
I've used this method to measure for stair treads and risers where the ends are not always parallel.
I love this, never ever considered doing this of course. So glad you've shared it. Thank you.
That's the way I've always done it!
I used to use this method a lot when measuring for countertops. Some runs are too long and it’s frustrating to extend a tape measure that far. So I would just mark a manageable tick line off the inside corner and then hook my tape on the other side and measure to my tick.
@@michaell8835 😊👍
If you’re going to use this method it’s a good idea to always use the same measurement so you’re always adding 10” or 60” or whatever increment is appropriate
Awesome tips. Always good to learning new ways to do stuff. My favorite was Bill’s tape measure hack. Thanks, guys!
Man, that is beautiful dark wood.
Thanks for sharing. Looking forward to more tips. Great content.
These tips were fantastic! Thank you!
Omg. The center of the circle is a game changer. All great stuff!
Great info. Thank you. Your visuals were top notch and made the concepts much easier to comprehend!
Excellent tips! Thanks for posting!
That last one was simple and logical.. we should all take the extra minute to think of such easy solutions. Cool!
Thank you both, picked up some very useful tips, keep ‘‘em coming 👍🏻
Along with you woodworking skills and tips, I really like your humor.
Great tips fellas! The tape ball is pretty cheesy tho lol
Radial arm saw for everything!
Man, your shop is way too clean! 😁
Still learning, great and easy to understand. Thanks for the video.
Neat! Never thought of #2. Basically the same idea as a shim in a thicknesser. Very cool.
😂😂😂😂😂 I loved it when he slid the tape measure off the table. Coffee the nostrils moment! Just found this podcast and I subscribed immeejitly, and set it to all notifications. I'm intimidated by the math, but you make it seem learnable.
Great tips guys. I have used several. Thanks. One tip for you. Get rid of the silly ball throw.
My tip is to find a channel called Foureyes, they have incredible tips. Thanks guys. I’m a newbie wood worker and want to get into furniture making and your channel is fantastic.
Just found you guys and love the tips and love how you present your information simple and funny!! Keep up the great work.
Thanks for sharing your knowledge with us.
Great tip on the jointer solution thanks 🙏
love that "in out", "up down" trick - I wish I knew it earlier!
These videos are great. The info is great, and the dry humor comedy is on point!
Great job. Keep em coming please.
These tips are excellent !! One other idea I just tried was using a laser ruler to measure the inside of a cabinet.
Thanks for the effort!! The depictions/graphics toward the beginning of the video are exemplary!
Very, very useful and appreciated tips for a beginner like me. Thanks and keep them coming!!!!!!!!
Great tips! I’m a new woodworker and I’ve already had some of these obstacles. So I will definitely be using these!
Hello friend
Excellent tips! Thanks!
Last one is so simple. I think that’s the best one
I always learn at least 1 thing from your videos. This time was no different. Thank you (& your contributors)!
I really like the extended straight edge idea
Very practical video! Thanks
Tried both ways, works great!
Great tips and help. Thanks for sharing this video.
Now that I also make videos where I work the iron I understand how time-consuming it is to make videos of this kind, not to mention material and editing, doubly good for these videos🔥🔥🔥
Great tips!! Please keep them coming...
That was very refreshing! Cheers!
Great video. Love your dry sense of humor
Amazing video! Love it!
Great tips! And now...I'm hungry. Thanks guys!
Great tips. It good to see Sean in a video as well.
Your explanation are great with slow and concise examples and pictures. Well done fellows
Great tips thanks
Good stuff. Thanks!
Outstanding guys.
Love the tips! Thank you! Subscribed!
I have completely learned how to be a wood worker based off UA-cam . I have never we had a teacher or anyone that would teach me .. so I have watched 100s if not 1000s of hours of UA-cam to learn the trade . Videos like these mean a lot to me .. it’s huge deal and I super appreciate it.. I’ve had to fake it to make it to get jobs .. so these vids are life changing 🤘🏽
Excellent tips. Didn’t know any of them before this video!
This is my first time watching one of your videos. They are simply excellent. Keep up the good work!!!! 👏👏👏
Love your videos! Plz keep up the great work!!👍
For measuring the inside dimension, you can also take the two sticks and where you lay the one on top, mark a line at the end of the stick and an x next to it. That way you can carry the two sticks away and just line up the mark again.
learned so much, thanks guys!
Love your work !
The tips are great, however the delivery of the tips is superb!
Guys this video was sooooo helpful thank you!!!!
You got me with the baked goods. Subscribed.
Nice video. Love your humor.......and the tips of course.
Fantastic tips. Thank you very much.
All great tips. For measuring inside dimensions my father had a wooden folding rule that had a brass insert on the last portion of the rule. It could extend to cover the last few inches allowing it to touch the opposite inside edge. It had graduations marked on the brass to determine the exact width. I guess they're still made today. Thanks for posting.
Thank you for your sharing. They are very useful tips. Keep doing your great work.
Like the inside measurement technics. Not sure if already mentioned here but I have had very good results in cabinet making just using the old school Lufkin carpenters folding rule with the extension slide. Works great at the saw too for either side of the blade teeth to the rip fence. Thanks for the great tips.
Same here. I have both a 6 and 8 foot folding rulers with the brass pullouts. In fact, my 8 footer is my go to measuring device for anything 8 foot 6 inches or less. Old school, I know, but that's what I started out with and it works for me.
Always enjoyable. Thanks for updating my mind. I've used all of these solutions over the years , now they are back in the forefront.
😊👍👍
The animation is very helpful for visual learners like myself!