2024 H-D® Street Glide™ & Road Glide™ 6x9" Install | Harley-Davidson® Powered by Rockford Fosgate®
Вставка
- Опубліковано 16 лип 2024
- How to install the Harley-Davidson® Audio Powered by Rockford Fosgate® - Stage I (P/N: 76001291), Stage II (P/N: 76001292), or Stage III (P/N: 76001299) Saddlebag Speakers on your 2024 Street Glide™ or Road Glide™.
00:00 Introduction
00:19 Saddlebag Speakers on '24 RG/SG
01:10 Product iSheets / Service and Repair Manual
01:27 Remove Main Fuse
01:57 Remove Saddlebag Lids
02:30 Prep for Internal Harness Panel
05:35 Route Wiring
06:09 Reinstall New Speaker Cover Kit
09:06 Reinstall Covers on Saddlebag
09:37 Install External Audio Harness
13:09 Differences in Stage Kits
15:43 Configure Amplifier
17:09 Technical Support
#harleydavidson #rockfordfosgate #motorcycleaudio #roadglide #streetglide - Авто та транспорт
You MUST wear eye protection when doing custom installs like this. I installed speakers in a custom kick panel setup for car audio & a piece of plastic went flying into my eye, it was burning hot & jagged, I'm really lucky I didn't lose my eye. Please wear safety equipment when working on or riding your motorcycle.
Thanks for sharing your experience with other fanatics! Our installer Eric tries to set a good example in these videos by always wearing his eye protection 🤓
Amazing video and great job Eric. I purchased stage 2 for the fairing, stage 3 for the saddle bags and the amp. Your video was so easy to follow actually my son did most of the work lol. Now all we need is SUBWOOFER from you guys as soon as possible. Just a suggestion please make it little bit smaller so we can put something in our bags. Not asking for much room but something. Anyway can't wait for the SUBWOOFER. If you got some insight on it please let me know. Thanks.
No answer. I guess no subwoofers?
@@bartii8311 Hi @bartii8311 , sorry I missed answering your original post...I try to go through all the posts on a weekly basis and I must have accidentally missed yours. I definitely appreciate your feedback on the video. The subwoofer will likely have a quick release so will be ultra-convenient to remove it when you need extra luggage room. You'll also likely have the option of running 1 or 2 subwoofers.
Nvs audio look into them they have subwoofers setup for the new 2024@@bartii8311
The rubber gasket was the hardest part. Impassible to get it to seat in the corners with what little adhesive the backing has
Agree! In the video I slightly stretched the first gasket, which made it hard. The second one I was careful not to stretch at all, and it made seating the adhesive backing easier in the corners.
Any recommendation for any adhesive that can help the adhesive stick better? My corners just fall off and refuse to stick
@@kntmarecobra I had the same problem with the corners lifting. Off camera, I removed the gasket and reattached it being careful to press it firmly into the corners. Everything continued to stick just fine after I did this. You may need to look into a 3M adhesive if it lost stickiness.
🎉easy going....with this vid👍👍👍.....i think🤔😉🫡🥳
So Rockford is not coming out with a cut kit for the 24 non cvo? Basically saying have to go to Harley purchase cvo style lids that is paint match to your bike to do this setup.
Currently, there is no aftermarket cut-in kit available.
How about a smaller internal harness panel for just the speakers? I’m sure I’m not the only one that doesn’t plan on dropping subs in either bag, and the ‘24s have the amp in the fairing - got no choice but to drill TWO huge holes in BOTH bags.
This design was developed exclusively by Harley-Davidson engineers.
What’s the tool he uses to get the screw in for the handle?
I used a 1/4" ratchet wrench: www.lowes.com/pd/CRAFTSMAN-1-4-in-12-point-Standard-SAE-Ratchet-Wrench/1000594319
so are the saddlebags on the 2024 the same as 2023?
The 2023 Road Glide and Street Glide bags are the "Rushmore" style. The 2024 RG & SG bags are the new "Skyline" style.
Dude, I'm a bit confused, is this an actual problem of the 2024 street glide that Harley needs to fix and why would the tech tell tou to put a solid bolt in there? I don't understand why your doing this and not them??
Are you referring to 7:04 where we're inserting the screw for the release lever? If so, this is a Harley-Davidson screw that's needed if you're replacing the saddlebag lids with the CVO versions that have speaker provisions. This is exactly the same screw used on 2014-2022 saddlebags as suggested by Harley-Davidson.