Removed the center differential and installed a spool from my limitless into the infraction to try and stop the car from spinning out so easily thanks for watching
Stop spinouts in awd rc 1. Locking front diff 2. Adjust oil weight 3. Stickier tires in rear My infraction is box stock other than Scorched Rc under skirts. Mine does not spin out. Maybe im lucky. Also tow out the front a degree or two. Tow in the rear a degree. Good luck Also get you a $20 powered screw driver. And the mip hex bits. Time and arthritis saver
GRP'S S5 compound!! SRC ROADCRUSHERS would be best if they would fit... SRC cane out with new rim style for 2019 I plan on getting another set this year....gotta try out that new rim design!
Nice bro! Truck is running good it seems. I see a lot of palm trees! Florida? That neighborhood even looks like some spots out in California. Cool video man. Thx for sharing
Wont the spool make your traction problem worse by allowing more power to the ground. Think the diff action would help...less torque bottom end for better traction out of the gate
@@earlmoorhead5555 I have a flysky fs gt3b transmitter I have 3 settings fast,normal,and slow braking so between soft braking and or fast braking would be good?
I W yes I agree close is better this one I wasn’t doing speed runs it was more for protection then anything but your righ caps close to esc is better thanks for watching
@@earlmoorhead5555Ok I gotchu! Since you said the infraction seems to handle a bit better with the spool in there. Ima do the same maybe find like a 39t spool gear or something. Jus mess aroun with it. I appreciate it man!
I'm gonna build a LIMITLESS , strictly for speed-runs....i bought a 50tooth center spool..... I'm seriously thinking to fill the front & rear diffs with RED GASKET MAKER... ALL 4 WHEELS WILL HAVE EVEN PULLING POWER.... Also Should "TRACK" BETTER .
@@earlmoorhead5555 I'll get an extra set, just in case i don't like it... The good thing about using THAT thick of a silicone is that it can be removed .
Stop spinouts in awd rc
1. Locking front diff
2. Adjust oil weight
3. Stickier tires in rear
My infraction is box stock other than Scorched Rc under skirts.
Mine does not spin out. Maybe im lucky. Also tow out the front a degree or two. Tow in the rear a degree. Good luck
Also get you a $20 powered screw driver. And the mip hex bits. Time and arthritis saver
Wzup Mr.Moorehead!!! Just watching 👀 some of your older videos on the infraction..thinking about putting a spool in. Always a pleasure sir 🙏
👌👑
I cant wait to put spool on mine love what you do inspiring and motivating us much respect always RcFam4Life TRUFAM4LIFE BROTHERS4LIFE 🤜🏽🤛🏻✊🏽💪🏽💯🍻👊🏽
Foam tires also do well
TRU BOYZ RC thanks brother 👍 the spool help me a lot easier to get speed out of it with the spool and drifts so very nice 👌🤟🏻🎃
@@earlmoorhead5555 your welcome big bro
@@earlmoorhead5555 Hi Earl, that a max6 esc?
Also, that spool fit right in no issue?
Thankyou man.
@@1521joe yes 👍
Did you change the center drive shafts from the limitless into the infraction???
No
@@earlmoorhead5555 I have the v2 infraction and the v2 limitless spool doesn’t fit with the v2 infraction center driveshafts
GRP'S S5 compound!! SRC ROADCRUSHERS would be best if they would fit... SRC cane out with new rim style for 2019 I plan on getting another set this year....gotta try out that new rim design!
Nice
Mosfet's in our esc's generate alot of heat.. constantly opening and closing rapidly letting voltage pass thru
Awesome video very nice upgrade and good runs great job thumbs up 👍
MRBRUSHLESS thank you
That Infraction running good bro!!!! 👍🏾💯
Thanks 🙏
Earl Moorhead you’re welcome bro
Very nice man. I mesh my gears the same way. Great video 👍👍
Kenny mph Melanko that’s cool at least I’m not alone thanks 🙏
Nice car. And a m3😍😍😍 love both of the cars
Thanks 🙏
Nice bro! Truck is running good it seems. I see a lot of palm trees! Florida? That neighborhood even looks like some spots out in California. Cool video man. Thx for sharing
RED ROX RC thanks it’s in California
Earl Moorhead damn I was right! Warner center? Or maybe San Diego?
RED ROX RC close canyon country ca
Earl Moorhead oh damn west hills area. I grew up in the San Fernando valley. Graduated from calabasas high!
RED ROX RC that’s cool 😎
Wont the spool make your traction problem worse by allowing more power to the ground. Think the diff action would help...less torque bottom end for better traction out of the gate
It should stop it from spinning out should make it pull straight 💪💪👍👍🔥🔥🔥
Thanks for your video will help me out
CMW Chris woodward thanks for watching 🔥🔥💪💪👍👍🤜🏻
Spool ftw! Got one on my 8s Talion and 6s Typhon and oh boy haha
Nice 👌🏾
MOBAY 876 RC love this rc thanks 🙏
So a spool basically a spur gear or are they different ?
What’s the best pinion ratio with the 34t limitless spool stock motor for bashing and speed runs?
I use a 27 pinion
Very very goood my friend👌👌👌👌💯💯💯💯
Adil Hakim thanks brother
Have a question what percentage are you setting your braking at one your hobbywing?
100 💯 braking and I adjust if my controller
@@earlmoorhead5555 I have a flysky fs gt3b transmitter I have 3 settings fast,normal,and slow braking so between soft braking and or fast braking would be good?
@@mrmontgomery526 daft braking on a speed run is what I would do
Thats running nice 👌🏾
Thanks 🙏
Nice bro! 💯💯 You might want to solder your cap pack closer to you esc. As close as possible.
I W yes I agree close is better this one I wasn’t doing speed runs it was more for protection then anything but your righ caps close to esc is better thanks for watching
@@earlmoorhead5555Ok I gotchu! Since you said the infraction seems to handle a bit better with the spool in there. Ima do the same maybe find like a 39t spool gear or something. Jus mess aroun with it. I appreciate it man!
Nice vid, pardon my ignorance but what's the reason for using more cap heads?
To take the
Ripple away from the esc so it doesn’t back feed and blow up the esc 💪💪👍👍🔥🔥🔥
@@earlmoorhead5555 ok, I'm new to the electric cars thanks for that
👍👍🔥🔥
Maybe wiggle the gear some more. No, just a little more. Screw it, one more time. I think ya got it. 😂
😂😂🤣🤣👍👍👍👍
You need to open ya own hobby shop! I just got the felony gonna put a 5680 t.p motor in it what you think of that
Tp a good brand keep the kv around 2 k or it will run hot 🔥🔥💯💯💯
Someone needs to build an infraction with rally tires and see how it competes on a dirt track!
Charlie 86 yes but it’s a very heavy and big car for a track but who knows might works well
Earl Moorhead hmm, maybe I should try it. Gotta save up around 1k first!
Charlie 86 yes
I think bottoming our would be a issue
Old vid, noticed where you have your cap pack soldered close to the batterys, you need to have those soldered as close to the ESC side as possible…
Not necessarily depending on you set up as I explained in several videos showing the ripple loss 👍
Damnit Earl!.. You got an Infraction too?? .... I want one so bad lol
Yes the infraction is a fun street basher love the looks and the performance 👍👍🔥🔥🔥
@@earlmoorhead5555 Its my favorite looking RC
Smart move 👌👍
Subbed ya
Speed Freak thanks
That’s deff not stock gear that’s the high speed 27 no way that’s a 20
Angel Fuentes it might be
Oh yeah, for sure thats the 27. For sure😂
I'm gonna build a LIMITLESS , strictly for speed-runs....i bought a 50tooth center spool.....
I'm seriously thinking to fill the front & rear diffs with RED GASKET MAKER...
ALL 4 WHEELS WILL HAVE EVEN PULLING POWER....
Also Should "TRACK" BETTER .
Yes faster with locked diffs for sure just on a bad road no traction need that slip 💯💯🔥🔥🔥🔥🔥
@@earlmoorhead5555
I'll get an extra set, just in case i don't like it...
The good thing about using THAT thick of a silicone is that it can be removed .
They make a diff locker for the car but silicon should be just as good..
show2ime yes I agree 👍👍💯💯🔥🔥🔥
Dust just fell out of the motor slide man blow that bad boy off for the save the bearing foundation
This must be an old video?
Yes 👍👍
I appreciate what you're doing bud, but the camera skills are painful to watch.
Sorry your the only person who’s ever said that 🤔🤔🤔🤔🤔
Man get rid of that blx 2050 bro make that switch to Tp power
Chris Cosey I don’t need this one that fast my limitless and speed cars have tp already but this seems fast enough to street bash 💪💪🔥🔥👍👍
Blx2050 still good for 100+mph runs especially with the right ESC. But for all out speed my favorites are Castle 2028, Castle 1515, or tp4070tm
Weird it’s so close to the Limit.
1etergen they are exactly the same except for shocks and spool that’s it
sexy!!
Dakind brew great rc arrma built