That is a deal breaker that the battery has a chip on it making it difficult to swap out the batteries, unless they charge a more reasonable price for battery
Very cool! First of all, I would like to congratulate you on being able to do this! My respects. I've been watching your flights for a long time, and I knew you hacked those batteries. I guessed it. But there was no detailed information anywhere. So I bought an Aeropic B0B. But it does not show the voltage of each sell, and also works only with the old firmware on the Mavic Mini-1. And it doesn't work on the Mavic Mini-2. So in theory, your option is better. But there is no price anywhere on the site. I hope it won't be too big. And of course we are waiting for your new long-range flights! After all, you are a Longranger! :)
Hello, thank you for your kind comment! :) Yes, my program can repair the battery and won't break functionality, and will work perfectly on bat type 1. Yes, you can even solder balance cable and fly. The price isn't high compared to others, as you can repair more chips, not just to buy one. you can contact me for price Thanks :)
I was reading the documentation. What was the adpater you were talking about? "you will need an adapter. Without the adapter, program will still run, but will not be able to diagnose the battery."
Great video dude! Just quick questions: how do you connect the battery on computer to configure it all and when I can buy the battery body, cell and other to do a mini 2 battery with Air 2's cells? Also please could you confirm if the values of the battery are the same as original one and the difference is only in respect to the weight? Thanks!
Hello! Is it true that mini 2 battery BMS board locks when you cut off factory cells? Is it just because of the factor of power cut? If so, is it possible to replace factory cells to 3500mAh cells without TRB - by supplying temporary power lines from other cells before cutting factory cells?
Thanks for videos, maybe you know where I can find bms board for mavic mini 2? I want build my own battery. I can’t find where I can order new bms and than programming by TBR
need to get ev2300 to plug the batt to pc and the boards come from existing mini 2 batteries.....you take them apart and use the board.......I cant find the batteries neither some guy said zdf on aliexpress but cant find the exact model im not good with batteries but zero problem learning ......😂😂😂😂😂
@@kylelandor7825 For those who really like the hobby and consumes a lot of battery, it is almost impossible to practice it, does the ev2300 provide the necessary software to operate ?
I'm having problems with soldering it together... What's the inside of the eye drop bottle? flux? maybe thats why I'm having problem soldering,, great vid thanks alot!
Great work!! Would it be posible to mod with a smaller capacity lipo to keep the weight under 250g with prop guards and ND filters for use in EUROPE? And if so where could we find the parts? Thanks
@@thelongranger7574 I get that, but I will be able to put ND filters Legally in my country. It would be great if you could help me, I can’t get hold of any batteries from Japan in Europe.
What was the computer program used at the end? I have two mini 2 batteries that have burned at the connector. I was thinking of trying this but I’m lost about the computer program🤔
@@thelongranger7574 Thanks, I found ZDF cells on Ali. Looks like LiHW, hope so!) Now I'm ready to buy TRB-2300 program. Does it works with Mavic pro controllers? I hope to use it, making modified battery for my mavic pro!
that is my dream . the power to gain more flight time to my DJI MINI 2. I HAVE SEEN THAT THE CHINESE WAS MODIFIED WITH A BATTERY OF 3600 MAH. I NEED MORE INFORMATION. Please...
:) i hope the video helps you build such battery and repair it with my program ))). China just does what I did in my video and tweaks it with my program. What more information do you need? I think I gave all.
I am not getting the email, I put my email in so i can get the key, and after that I havent recieved an email, not in my junk mail, I was going to try to use a different email, but it said i made an account, so what do i do to fix that?
La prossima volta che devi saldare le linguette della batteria, fondi lo stagno in un tappo di ferro, poi immetgi ad una alla volta i poli della batteria nello stagno fuso, così avrai entrambi i lati con lo stagno e salderai meglio
...contacted this guy...no reply. So I guess it's a no go on the mod unless I do it myself...which I can,but it's costly...2 cells come from an Air2...that battery is over 100 bucks...and a Mini 2/SE battery is 50 bucks....🤷🏻♂️
i found a cell 2000mah about the same size and weight expecting atleast 40 to 50 minutes for any of you interested its samsung ICP103450S sizes are height 1.1cm length 4.8cm width 3.3cm combined 4000mah weight of both batteries combined around 85grams i will update soon after the upgrade
@@thelongranger7574 Thanks. Unfortunately, the program doesn't start with the free license, so I can't try it. I was able to download it, I wrote an email to support for a demo license.
That is a deal breaker that the battery has a chip on it making it difficult to swap out the batteries, unless they charge a more reasonable price for battery
Very cool! First of all, I would like to congratulate you on being able to do this! My respects. I've been watching your flights for a long time, and I knew you hacked those batteries. I guessed it. But there was no detailed information anywhere. So I bought an Aeropic B0B. But it does not show the voltage of each sell, and also works only with the old firmware on the Mavic Mini-1. And it doesn't work on the Mavic Mini-2. So in theory, your option is better. But there is no price anywhere on the site. I hope it won't be too big. And of course we are waiting for your new long-range flights! After all, you are a Longranger! :)
Hello,
thank you for your kind comment! :) Yes, my program can repair the battery and won't break functionality, and will work perfectly on bat type 1. Yes, you can even solder balance cable and fly.
The price isn't high compared to others, as you can repair more chips, not just to buy one. you can contact me for price
Thanks :)
@@thelongranger7574 how can i contact you?
mp drone patboontrb@gmail.com
I was reading the documentation. What was the adpater you were talking about?
"you will need an adapter.
Without the adapter, program will still run, but will not be able to diagnose the battery."
very smart after you replace new battery what was flight time how many minutes
Great video dude! Just quick questions: how do you connect the battery on computer to configure it all and when I can buy the battery body, cell and other to do a mini 2 battery with Air 2's cells? Also please could you confirm if the values of the battery are the same as original one and the difference is only in respect to the weight?
Thanks!
Hello! Is it true that mini 2 battery BMS board locks when you cut off factory cells? Is it just because of the factor of power cut? If so, is it possible to replace factory cells to 3500mAh cells without TRB - by supplying temporary power lines from other cells before cutting factory cells?
It's hard and you will probably end up glitching the BMS and it will not work. Use TRB and you're safe.
Hello sir! What app are you using to program it and how do you connect yhe battery on the computer or laptop?
where can I find battery connector to create a new battery with new cells without using the old battery? thankyou
Where do I get the cells used in this video?
You will be able to purchase soon from EU based shop (from us)!
Great job...my batery cell error..
Can it fix again?
wow a great tutorial.. do we need to buy the program you use in programming the new cells?
Yes, you need to.
Thanks for videos, maybe you know where I can find bms board for mavic mini 2? I want build my own battery. I can’t find where I can order new bms and than programming by TBR
need to get ev2300 to plug the batt to pc and the boards come from existing mini 2 batteries.....you take them apart and use the board.......I cant find the batteries neither some guy said zdf on aliexpress but cant find the exact model im not good with batteries but zero problem learning ......😂😂😂😂😂
let me know if you know the model for the mini 2 mod that would help alot thx
@@kylelandor7825 For those who really like the hobby and consumes a lot of battery, it is almost impossible to practice it, does the ev2300 provide the necessary software to operate ?
I'm having problems with soldering it together... What's the inside of the eye drop bottle? flux? maybe thats why I'm having problem soldering,, great vid thanks alot!
Conseguiu achar a solução?
same
Ola amigo onde você comprou as célula para fazer a modificação queria fazer no meu sou do brazil
Eu também fiquei curioso
Thank you for this informative video. What about these 2 fine black wires at 2:29?? Why are they totally removed?
Maybe you posted on the wrong video, what I see is he removing old battery plate, not wire.
@@sergiomomesso1590 did you see the fine black wire at 2:29?
Where? I don't see any wires being removed.
@@thelongranger7574 how do i post a photo of the wire that i marked out from your video?
@@2020Haidar send it to support@trb2300.com
How did you connect the battery pins to the computer?
Great work!!
Would it be posible to mod with a smaller capacity lipo to keep the weight under 250g with prop guards and ND filters for use in EUROPE? And if so where could we find the parts?
Thanks
Hi yes, but u will get less flight time
@@thelongranger7574 I get that, but I will be able to put ND filters Legally in my country.
It would be great if you could help me, I can’t get hold of any batteries from Japan in Europe.
Toni Hardcastle send msg on patboontrb@gmail.com and write there what you wrote me :)
Mavic Air (1) battery cannot be reached by the CP2112.
CP2112 only supports I2C, and for it to work properly it would have to support SMBus. Use EV2400.
What's the name of the background music?
What was the computer program used at the end? I have two mini 2 batteries that have burned at the connector. I was thinking of trying this but I’m lost about the computer program🤔
Https://trbwiki.patboonlab.co
Hello, can you tell me a link where to buy the increased battery for mini 2? Thank you
Hi, thanks for the video.
Where do you buy 3500mah cells ?
Hi, from my Chinese partner.
@@thelongranger7574 do you have a link ?
Qual produto você usou pra soldar?
Hello sir, can you help to unseal the board of this drone baterai?
Actually, I have EV2300 but I can't operate it, can you help me with that?
Yes, please contact patboontrb@gmail.com
I'm sorry if this is a stupid question, but does anyone know or have a diagram of what each slot is on the battery?
Hi what is the worktray you are using ? link please
Can this same modification be applied to the new Mavic Air 2s? Is it possible your software can also modify this battery too?
Of course! All dji batteries are supported by this program
@@thelongranger7574maybe you know where I can order bms for mavic mini 2 and for air 2?!
Why does the TRB program require admin rights on windows when you install? thats strange
To ensure it’s not running in VM.
can the heat from the iron solder, burn the bms ? i cant remove the old plates ...
You need to do it fast in order to not damage the pcb or the battery. 300ºC is a must.
Hi! Where did you buy separately cells for dji air 2?
AliExpress
@@thelongranger7574 Thanks, I found ZDF cells on Ali. Looks like LiHW, hope so!)
Now I'm ready to buy TRB-2300 program. Does it works with Mavic pro controllers? I hope to use it, making modified battery for my mavic pro!
@@aleksisasis Yes man, reach me please on patboontrb@gmail.com
@@aleksisasis im looking for the batteries for the mini 2 mod do you know the model ?
Hey just a quick question, is it necessery to reset the IC or is it just to keep track of the cycles of the modded Pack?
You need to reset the IC.
How about Fimi X8 Mini?
Question...do you know if it's possible to to use the drone or hub to program the bms?!
I ask because updates on it's firmware also run in that order.
Hello, what is the program you are using? Do you have a link to download it? Thank you
Hello,
trbwiki.patboonlab.co
@@thelongranger7574 thanks but how can I connect the battery with the computer please
عابر سبيل using an adapter ev2300 or cp2112
عابر سبيل contact support plz
Nice mod, thank you for sharing.
I added your channel, hopefully you'll connect with another Mini drone pilot?
How much to just buy a modded battery from u
Hello, please send me message to: patboontrb@gmail.com
Can i use 2 mini 2 batteries to make one?
No, I wouldn't recommend that.
Hello
Can you help me please
I can't find download links for battery repairment tool program TRB
How can I download it
Thanks
trb.patboonlab.co
Please contact support if any issues will happen: patboontrb@gmail.com
Quanto mi costa per aumentare il mio pacco batteria
hola puedes ayudarme con una licencia y un tutorial para una bateria phamton 4 gracias....
Hallo, how much longer will the quadcopter fly on these cells?
38 min flight time
Good fly time! Where can I buy such cells?
Asser Qwerty aliexpress
@@thelongranger7574 I not found same cells in ali. Please give me the link. Thank you!
What is the cell type?
that is my dream . the power to gain more flight time to my DJI MINI 2. I HAVE SEEN THAT THE CHINESE WAS MODIFIED WITH A BATTERY OF 3600 MAH. I NEED MORE INFORMATION. Please...
:) i hope the video helps you build such battery and repair it with my program ))).
China just does what I did in my video and tweaks it with my program.
What more information do you need? I think I gave all.
JESUS DIAZ I’ve replied you, sorry for late reply.
@JESUS DIAZ i have replied you
I am not getting the email, I put my email in so i can get the key, and after that I havent recieved an email, not in my junk mail, I was going to try to use a different email, but it said i made an account, so what do i do to fix that?
Contact support plz.. patboontrb@gmail.com
Will the mini 2 battery fit the mini 1 if you remove? its case
Yes but you need to reprogram it with TRB
@@thelongranger7574 ok thanks, i was going to buy one but i dont know how to program so ill just stick to the mini 1 battery.
Ivan programming is done automatically by program or you can contact trb support team
How can I purchase one of these?
Contact: patboontrb@gmail.com
How to connect through the ev2300 to computer?
Open TRB, and go to Tools and click on search battery information, there write name of the battery.. BWX-161 ..
@@thelongranger7574
I means how the bms connect on ev2300 ?
@@donniebrasco7604 via smbus, pin out is in TRB, i don't have it in mind
Where we can purchase other bms for making new battery?
you can only use original bms
Understand, we can only replace old battery and not create new one. Where we can purchase new battery, the same you will use in the video?
La prossima volta che devi saldare le linguette della batteria, fondi lo stagno in un tappo di ferro, poi immetgi ad una alla volta i poli della batteria nello stagno fuso, così avrai entrambi i lati con lo stagno e salderai meglio
Which cells are you using?
Mavic Air 2
@@thelongranger7574 what capacity, size and C rating
DoctorMike Reddy 3500 mah, i don’t remember size, it fits into mini 2, and 15 C
@@thelongranger7574 thank you
9:04 capton or solde mask only
Apakah bisa untuk ganti Cell battery dji spark?
hallo bos...how much price the lisence for TBR software?
Contact me on email.. site trb2300.xyz .. email: patboontrb@gmail.com
@@thelongranger7574 if I use original mini 2 batteries, do I still need to run the program?
THE URBAN ARTIST i have used original bat too. The thing is the bms will lock
...contacted this guy...no reply.
So I guess it's a no go on the mod unless I do it myself...which I can,but it's costly...2 cells come from an Air2...that battery is over 100 bucks...and a Mini 2/SE battery is 50 bucks....🤷🏻♂️
From what email you have send your question?
i found a cell 2000mah about the same size and weight expecting atleast 40 to 50 minutes for any of you interested its
samsung ICP103450S
sizes are
height 1.1cm
length 4.8cm
width 3.3cm
combined 4000mah
weight of both batteries combined around 85grams
i will update soon after the upgrade
Boy u wrong. 2000mAh in series connection will stay 2000mAh
you would have to make 2s2p, that will weight around 180g, and the flight time will be poor. 18650 arent good for drones, use lihv at best
@@thelongranger7574 hold up i didnt calculate the capacity my bad
@@Bundesregierung_Deutschland i didnt calculate the capacity i just realised that lol
The page does not work.
trbwiki.patboonlab.co
@@thelongranger7574 Thanks.
Unfortunately, the program doesn't start with the free license, so I can't try it.
I was able to download it, I wrote an email to support for a demo license.
An error occured on server, please contact author.
I get this error
dead link