Only problem is you can’t really duel with xenopixels. A lot of company’s say you can with theirs but you see a lot of aftermath photo’s with blades missing led’s. I went for the rgb one because me and my mate both bought one to start dueling eachother. Replacing an RGB blade is €50 instead of €150 for a Xenopixel and the RGB one will break a lot less easy because it’s just a tube. Not a tube with hundreds of fragile RGB lights in them. The rgb one still looks good, way better as they did a couple years ago. Now with smoothswing and stuff they are a bargain for just over €100. If you want to duel get rgb baselit, you want a cosplay get the xenopixel.
Comparissons like these can mislead people new to the lightsaber hobby. So let's set a few things straight. A baselit saber used a LED-module that's in the hilt to light up the blade. Very often the blade is brighter at the hilt side and becomes dimmer near the tip. These LED-modules often consist of three or four "Cree's", these being high powered LED's. There are a few variations of these modules that impact the brightness and color variations. A quad cree often has a single dedicated color. Although the wattage is higher than a tri-cree the quad cree doesnt sit ideally under the focus lens and therefore in the end is not much brighter than a tri cree. An RGB tri cree has the most amount of color options. However depending on the color the brightness varies. White is the brightest since it uses all three cree's for mixing the color. Red, blue and green all just use one cree. Magenta, cyan and yellow all use two cree's and therefore are twice as bright as red, blue and green. Lastly you can have a dedicated tri cree either with 3x a color or 2x a color and once clash color. In my opinion this is the best option since you have a brighter saber than an rgb with the "weaker colors" and still have a dedicated flash color. Whenever you are in the dark two dedicated cree's is enough to properly light up a blade. Neopixel is lit up more evenly and a little brighter but does not last as long. Some sabers just go up to an hour before needing a charge. Neopixel sabers can be used for duelling but not anything too heavy. The real draw to a pixel saber is the bladeffects. There's also a small drop in module compatible(consisting of an rgb led) with a neopixel saber that allows the user to duel with their saber using a standard blade. Most sabers on the market charge insane amounts of money for their hilts and electronics so installing one yourself is a good option if you can handle it.
@@J_Keyz Do want sound? Do you want neopixel or in hilt led? Do you want to be able to unscrew the hilt into two working sabers or just one fixed hilt with two blades?
@@J_Keyz padawan outpost has a darth maul hilt for 475 dollars, which is a very good deal for two xenopixel sabers. Now I am not much a fan of the durability of LGT sabers compared to doing an install yourself. However these are a good option bang for the buck wise. They also have a fallen order staff. You can also buy two of their cheapest xeno sabers and probably find a coupler somewhere. Note that you might find the saber sabers for cheaper on etsy or elsewhere. In an ideal situation I do recommend a removable battery setup, proffie and nicer hilt but that will cost a lot more if you do not install the saber yourself.
@@florisvanlingen Man how do you know about all this stuff? I'd love to get a saber worth the money but not too intense about it as I have no intentions of cosplaying/dueling, just want one to have around the house for fun lol. It's difficult trying to decide where to buy and you seem to know way more than I thought was possible aha.
Damn bro I own a xeno and I want another saber but didn't know if I should spend more for a xeno because this time i wanna get a actual characters lightsaber and I defo should get another xeno
A xenopixel is definitely better because of the electronics it looks like the light is coming out of the hilt but a base lit is a great choice if you want to practice spins and see how you like having a saber
“Let’s put our sabers and see which one is longer” “O o k” 😅 “Now to see which one is longer let’s turn it on” *turns on both of them and one is the red colored on* “Uh O-“ *gets stabbed and dies*.
That’s some fluid spinning, mate
Thank you very much!
Practice makes perfect
Aye
Did any of us growing up in the '80's thought we would ever see a replica lightsaber that looks like it's straight out of the movie in real life?
Only problem is you can’t really duel with xenopixels. A lot of company’s say you can with theirs but you see a lot of aftermath photo’s with blades missing led’s. I went for the rgb one because me and my mate both bought one to start dueling eachother. Replacing an RGB blade is €50 instead of €150 for a Xenopixel and the RGB one will break a lot less easy because it’s just a tube. Not a tube with hundreds of fragile RGB lights in them. The rgb one still looks good, way better as they did a couple years ago. Now with smoothswing and stuff they are a bargain for just over €100. If you want to duel get rgb baselit, you want a cosplay get the xenopixel.
I just bought 3 Xeno and 3 baselit best of both worlds😂
Quick tip:
You might be able to swap the cores in the villages to make the Luke one Xenopoxel
That sounds like a good idea. I’ll have to look more into it but I also might sell it and get a more movie accurate version
U can’t, the baselit will have a torch in it, not Neo blade pins
Thank you, this side by side answered my main concerns on my first major Saber purchase. Dope spinning technique btw.
Great video by the way
Those were some clean Obi-Annies
thank you took some practice 😂
Baselit is for when you wanna duel, Neo is for when you wanna show off
This has me getting all excited like I'm child for my saber to arrive, thank you bro! You spin super well btw bro wow
Wow. Baselit is actually way better than I thought. Obviously no match for xeno, but still looks really good and is more sturdy
Comparissons like these can mislead people new to the lightsaber hobby. So let's set a few things straight.
A baselit saber used a LED-module that's in the hilt to light up the blade. Very often the blade is brighter at the hilt side and becomes dimmer near the tip. These LED-modules often consist of three or four "Cree's", these being high powered LED's. There are a few variations of these modules that impact the brightness and color variations.
A quad cree often has a single dedicated color. Although the wattage is higher than a tri-cree the quad cree doesnt sit ideally under the focus lens and therefore in the end is not much brighter than a tri cree.
An RGB tri cree has the most amount of color options. However depending on the color the brightness varies. White is the brightest since it uses all three cree's for mixing the color. Red, blue and green all just use one cree. Magenta, cyan and yellow all use two cree's and therefore are twice as bright as red, blue and green.
Lastly you can have a dedicated tri cree either with 3x a color or 2x a color and once clash color. In my opinion this is the best option since you have a brighter saber than an rgb with the "weaker colors" and still have a dedicated flash color.
Whenever you are in the dark two dedicated cree's is enough to properly light up a blade.
Neopixel is lit up more evenly and a little brighter but does not last as long. Some sabers just go up to an hour before needing a charge. Neopixel sabers can be used for duelling but not anything too heavy. The real draw to a pixel saber is the bladeffects. There's also a small drop in module compatible(consisting of an rgb led) with a neopixel saber that allows the user to duel with their saber using a standard blade.
Most sabers on the market charge insane amounts of money for their hilts and electronics so installing one yourself is a good option if you can handle it.
@@J_Keyz Do want sound?
Do you want neopixel or in hilt led?
Do you want to be able to unscrew the hilt into two working sabers or just one fixed hilt with two blades?
@@J_Keyz padawan outpost has a darth maul hilt for 475 dollars, which is a very good deal for two xenopixel sabers. Now I am not much a fan of the durability of LGT sabers compared to doing an install yourself. However these are a good option bang for the buck wise. They also have a fallen order staff. You can also buy two of their cheapest xeno sabers and probably find a coupler somewhere. Note that you might find the saber sabers for cheaper on etsy or elsewhere.
In an ideal situation I do recommend a removable battery setup, proffie and nicer hilt but that will cost a lot more if you do not install the saber yourself.
@@florisvanlingen Man how do you know about all this stuff? I'd love to get a saber worth the money but not too intense about it as I have no intentions of cosplaying/dueling, just want one to have around the house for fun lol. It's difficult trying to decide where to buy and you seem to know way more than I thought was possible aha.
Zeno pixel seems pretty sick to me
W man for doing this in the snow 🔥
I had to it looked cool
Both are nice
The force is strong with this wallet.
Oh hey I have the first one, cool.
moral of the story: sith have better budget
Haha that’s one way to put it
Im goin neopixel i just love neopixel
I have a 50 dollar base lit and it is surprisingly good. No neo pixel, but not bad for 50
How do you do this in the snow
Damn the spin was smooth. How long did it take to get good at it?
about a couple days! it's easier than it looks
Cool spins
thank you very much!
This is legit!
Damn bro I own a xeno and I want another saber but didn't know if I should spend more for a xeno because this time i wanna get a actual characters lightsaber and I defo should get another xeno
If you are trying to compare them actualy use the same ignition
Just ordered the Arrio Xenopixel v3 is it any good?
Xeno is a sound bourd so you can have a Xeno base lit
Ohhhh 🤩
What length are the blades?
Base lit’s do have cooler hilts but Xenopixel’s have cooler blades.
That's why I always go with baselit and it's always cheaper too
Is there a name for that last move?
Xenopixel or neopixel. What has best blade color and everything is xeno v3 have app to change stuff
I have the same revan replica
it's a really nice hilt
My dudes i have 1 question which is better Xenopixel or Baselit ? I need help, im just starting my lightsaber collection journey.
A xenopixel is definitely better because of the electronics it looks like the light is coming out of the hilt but a base lit is a great choice if you want to practice spins and see how you like having a saber
@@Jediknightmagic Thank you so much 🙏🏽
there is just no comparison. if you want something cheap you dont care about breaking, baselit. but neopixel is better
🗡️🗡️👍👍👍👍
Noice spins
Thank you!
if I was a baton twirler in a marching band I would use a lightsaber 😎👍
That would look really cool
@@Jediknightmagic double sabre, green and orange so when it's spinning it'll look like a red airplane propeller 😎👉
well 🤔
that escalated quickly 😳🤷
What's the difference between a neopixel and a xenopixel?
When they make xenopixel sabers that can handle super heavy dueling, then I’ll say xenopixel is worth it otherwise baselit is the way to go
Base by a mile!
Where did you get that baselit with blade effects?
I got it from AliExpress
Where did tou buy this xenopixel saber, i would like to buy it.
It’s from Allysabers, you can save 10$ if you use my code jediknightmagic!
Леее, аж биба взбиймилась, одобряю👍
Xenopixel is clearly superior
not in dueling lmao
@@paleofolk lol
Купил себе xenopixel такой же , это меч Дарта Ревана
Yes it is
No contest
Where do you buy xenopixel?
I got it from Allysabers
Too expensive
So do baselit and neopixel have the same durability?
No, the neopixels have LED strips along the blade and if you hit it really hard it could damage it. Baselit would be more durable
@@Jediknightmagic so would baselit be the best for dueling and neopixel for cosplay?
@@TheVibinSageNeopixel is just for shelf queens, if you want to fight with it then baselit is the way
Why dose the Why dose the Xenoepixel seem so much shorter
it's because it has a shorter blade. the xenopixel is 28 inches and the base lit is 35 inches
“Let’s put our sabers and see which one is longer” “O o k” 😅 “Now to see which one is longer let’s turn it on” *turns on both of them and one is the red colored on* “Uh O-“ *gets stabbed and dies*.
Rahul
Honestly baselit doesn't look that bad actually.
Is it safe to do duels with xenopixel?
ive heard its safer with a baselit. because you can damage the lights in the xenopixel.
@@martenkarren7413 ok tysm
is same as neopixel? or?
No the xenopixel is different than a neopixel
@@Jediknightmagic how so
Xenopixal is not rated for dueling
Yes you’re right
Xenopixle obv better
Turn off the goddamn lights
@@apoloflores3871 damn bro chill out 😂
Is it possible to stop working a baselit lightsaber if you use it a lot of hours?
Yeah it runs out of battery but you can charge it
Никсельпиксель? ФУ!
How long is the blade length 32’?