what do u mean by a grinding noise? what is the symptoms to know that is a broken gear? and also what causes it, to overcome after maintenance. Thanks in advance
Hi. Sorry. Thank you for the video. I can't find any information on these. Well a full tear down. The problem I am having with mine is a rattle from inside the eps when going over small bumps /gravel road. I have not stripped it has yet incase I need a replacment(no stock 2nd hand) do you know what this rattle could be? I have taken off the torque sensor and seems like the rattle is comming from the sliding collar/damper/torque converter.
I had a similar problem and the easiest and most expensive solution is to replace the entire bottom part of the column, but I chose the difficult and cheap solution by 3D printing the broken blue gear and finding a best way to fit back in, then you have to reset your EPS unit. Contact me if you need more information.
firstly diagnose your car to check if there are any faults stored secondly reset your steering torque sensor, check my other video on how to reset steering torque sensor ua-cam.com/video/nlx_umMnbic/v-deo.html
so my car Corsa C have this problem i guess...when the car is not moving, and even when the engin is on, the steering is kinda hard, but when wheels start moving the steering works fine and easy, and i could hear a little pop beneath the steering wheel everytime i turn it all the way to park or something, some people told me it's the gear and i need to change the whole collumn, and if i don't the steering wheel might get blocked or something
I think I have the same problem with my corsa C. Did you replace just the broken part or the whole steering column? I can't find spare parts to fix this :(
Hello, I have a problem with my Corsa 2, I am Pablo from Argentina, my car is hard on the steering, and it has a few brief "jumps" when turning the wheel, could you help me please? For the moment, repair the entire steering box, but the problem seems to be in the electric assistance, I also tried to regulate the potentiometer, but I still have the problem. Some advice would be helpful. Thanks
what do u mean by a grinding noise? what is the symptoms to know that is a broken gear? and also what causes it, to overcome after maintenance. Thanks in advance
Nice vid baba!!! I am planning to put this column on my citi golf to eliminate that parking excercise
Hi. Sorry. Thank you for the video. I can't find any information on these. Well a full tear down. The problem I am having with mine is a rattle from inside the eps when going over small bumps /gravel road. I have not stripped it has yet incase I need a replacment(no stock 2nd hand) do you know what this rattle could be? I have taken off the torque sensor and seems like the rattle is comming from the sliding collar/damper/torque converter.
Opel corsa utility bakkie 2005. Can the the gear blue part in the column if damaged be replaced
Unfortunately shops don't sell that gear
How do I test electricals no coms on one diagnostics
I had a similar problem and the easiest and most expensive solution is to replace the entire bottom part of the column, but I chose the difficult and cheap solution by 3D printing the broken blue gear and finding a best way to fit back in, then you have to reset your EPS unit.
Contact me if you need more information.
Thanks a lot , will contact you if I need more information
اريد ان اصنع واحدة مماثلة التي بلون الازرق
اذ امكن ترسل لي المواصفات
شكرا
Where can i go for that 3D printing in South Africa
I need info about the 3D printing
Good day how do I contact u
Have a problem with open Corsa d EPs steering wheel vibrates when engine iddles and sometimes power steering fails what could the problem
firstly diagnose your car to check if there are any faults stored
secondly reset your steering torque sensor, check my other video on how to reset steering torque sensor ua-cam.com/video/nlx_umMnbic/v-deo.html
@@mkautotech4440 thank you il give feed back once done working on the car
so my car Corsa C have this problem i guess...when the car is not moving, and even when the engin is on, the steering is kinda hard, but when wheels start moving the steering works fine and easy, and i could hear a little pop beneath the steering wheel everytime i turn it all the way to park or something, some people told me it's the gear and i need to change the whole collumn, and if i don't the steering wheel might get blocked or something
Hi ! I have the same problem as you with my Opel corsa c phase 1. Have you solved the problem since ?
I think I have the same problem with my corsa C. Did you replace just the broken part or the whole steering column? I can't find spare parts to fix this :(
unfortunately i ended up replacing the whole steering column as i couldnt find spares as well
@@mkautotech4440 i think I'll just go to scrap yard because damn those things are expensive. Thanks!
Hello, I have a problem with my Corsa 2, I am Pablo from Argentina, my car is hard on the steering, and it has a few brief "jumps" when turning the wheel, could you help me please?
For the moment, repair the entire steering box, but the problem seems to be in the electric assistance, I also tried to regulate the potentiometer, but I still have the problem. Some advice would be helpful. Thanks
Hola! A mi me pasa lo mismo, como lo solucionaste? Gracias!!
You are my hero! Thanks for helping me and others. People like you make the world and youtube a good place :) Cheers, have a good day
Glad to help
Corsa c 😂