Yes !! I am just waiting till your front wheel bearing goes so then I can see how you do it! I have now bought 6 bearings for the front wheels as I keep damaging the bloody bearings, this time I have bought an actual press and I am gonna try sticking those bearings in the freezer before I fit them
Just letting you know that I've somehow actually started saying fucking "YES" when things go wrong for me IRL (which is most of the time if I'm honest) so now I'm claiming it as my own idea. I'll be copyrighting it so expect a letter from my solicitor instructing you to hand over all your UA-cam money to me (YES). Thanks for your time.
😂😂great video....my daughter has lots of glue sticks and glue gun from school...weekend fix, drill all ball joints in my bm and inject them with glue sticks... ..thanks
Absolutely fcking brilliant, in the road, one Jack, pissing with rain, wondering if some granny is going to run you over… yes this truly is a real representation of working on one’s car 😆. Loving the ‘shitroen’ moniker and smattering of ‘shitter’ to describe and connections that will probably fail! Oh and the reference to the exhaust noise covering up the car falling apart…. Yes I too own a Shitroen… it all true. New subber here, loving the vid 👍
Oh god. You do know you are going to get a lot of idiots trying the glue gun trick. But because they didn't have the correct temperature setting it won't work lol 😂😂
Bien hecho amigo ! Yes good paint job and bush/ ball joint refurbishment to new standard. Amazing how ur freehand spraying missed all those unwanted areas. Ive not used hot glue before but i have pumped polyurethane sealant/ glue into a few bushes before to harden them up !
Eyup could I be cheeky and ask if ya will do a video of how to replace cig lighter for a USB charger. Who needs a shitty cig lighter in a car anyway 😂😂😂😂
I'm amazed with the quality of that paintwork! Looks just like it is out from the factory! Yor content is so valuable to us commoners. I'm pretty sure now you don't even know which sponsorship to accept and you swimming in cash.
sponsorship? everyone else is getting free jackery lithium power generator, welders, drill presses, car cleaning chemical and battle of the klans or vpn crap....most wont even do a video these days unless half of it is sponsored and showing the free stuff.
Messing aside , the wheel would leave you enough space to make the difference between breaking a few bones in your foot , or cutting it off ,,, referred to by those in heavy recovery as a survival space ,,, it may just make the difference ,, I hope you never have to test the theory , but you never know ,,,, and you still have a spare in the boot , so really it was only lazy that stopped you using two wheels stacked to make the job safer ,,,, that ratchet could be getting closer to me every day ,,,,
In an ideal world they would be replaced as a pair, but it’s not important in the same way as something like brake pads that should always be replaced as a pair. The only benefit of changing both together is that if one is worn out then chances are the other isn’t far behind. It won’t cause any issues just changing one other than you may find yourself having to do the other side not long after. It’s common practice just to replace the damaged/worn out side.
@@StupidBlokeStupidVideos Well, I did it. The drop link was seized, had to hacksaw the bottom off, then the top, then go buy a new one. I didn't have a ball joint splitter, so had to batter, lever, hammer it. All in, the job took 5 hours. At least it pissed with rain the whole time.
I'm confused. You went into some detail about applying the black paint to the wishbone but no detail, whatsoever, of what the green paint marks (clearly visible at 8:31 and 9:06) are for, where you should apply them or what shade of green they should be. Some randomly applied, left over, nail varnish to make it look factory?
Oh yea I forgot to show the all important green. It was a shade called “Jade Inspirational Empowerment” from the Rimmel London collection. Bought it off Kate Moss at a car boot.
Hello there, just recently found your channel and really appreciate your helpful tips and tricks. I followed your instructions on refurbishing my lower ball joint and the glue gun tightened up the joint really well, I was thrilled by the results. Unfortunately, my wife took the car to aquasize tonight and all went well until, for some unfathomable reason the front wheel parted company with the car as she turned into our drive, it bounced down the road and crashed through the neighbours front window. My wife subsequently lost control and hit my classic E type jaguar and pushed it into the garage door, which duly folded up and the car continued into the garage and through the rear wall. I spoke to my solicitor about this as my neighbour is sueing me for criminal damage and emotional and psychological assault. My solicitor said that it may be a good idea if I got your name and address, purely for routine reasons of course. Many thanks for the most informative vids. Paul
Hi, I just need to replace the lower ball joint, used your videos to get it all apart but cant seem to separate the ball joint from the wishbone. Is this possible or do you need to remove the whole wishbone and get a new one with the ball joint and new rubbers already fitted. Complete is £40, ball joint on itself is £15 but dont want to spend hours and hours trying to separate it for the sake of £25 difference and then its all new and replaced.
I’ve replaced the ball joint previously, but they don’t come out on all of them and the new one was such a piss fit that I had to weld it in. I’d just replace the full arm for what it’s worth tbh
Does it still come true if everyone knows ...... what you wished for when you pull that wishbone out though ?? Personally I wish I had a tin of paint as good as yours ,,, one quick dust and that looked just like a new wishbone .. [ for those who dont know } having said that the old trick was to mix up a pull tin of body filler and load it into a brand new grease gun , pump it into worn king pins through the grease nipples , wipe off tye excess then put a dab of grease on so they look just greased , leave it for an hour to set , put the wheels back on and drive straight to psv .... [ or so Im told }
I have drilled holes in the dash to run a wire through and I have cut speakers in the plastic !! Love the videos mate.. you should put a buy you a pint donation on your UA-cam!! Your a legend !!
Should have saved this one to go out on April fools day 2024😂😂😂😂bet there are a few that actually think you genuinely glued the ball joint, put a new Johnny on and fitted it😂😂😂😂
Getting that bolt in absolutely sucked. It did not want to line up at all. Somehow managed smack it into alignment. Hopefully it won't fall out. Great video as always!
@@StupidBlokeStupidVideos Here we have a very rare nut and bolt, the male is entering the female, it's got to be a tight fit, and he's really giving it some, well didn't last long, he's all torque.😁
![How to change front suspension arm / front control arm on CITROEN C1 (PM, PN) [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/7jf1Jez_-RI/mqdefault.jpg)
Yes !! I am just waiting till your front wheel bearing goes so then I can see how you do it! I have now bought 6 bearings for the front wheels as I keep damaging the bloody bearings, this time I have bought an actual press and I am gonna try sticking those bearings in the freezer before I fit them
Easiest way to fix that is to get someone else to do it 😂
Just letting you know that I've somehow actually started saying fucking "YES" when things go wrong for me IRL (which is most of the time if I'm honest) so now I'm claiming it as my own idea. I'll be copyrighting it so expect a letter from my solicitor instructing you to hand over all your UA-cam money to me (YES). Thanks for your time.
YES. If I gave you 50% of my UA-cam income would that be enough?
@@StupidBlokeStupidVideos YES
Thank you for convincing me that I’d be better off paying a garage to do it 😂
😂 brilliant comment 😂
@@joebloggs3629 I look forward to Infidel Castro’s weekly comment 😂
@@StupidBlokeStupidVideos this one is the pinnacle I've got to admit
I’d missed this addition to your repertoire……Haynes could learn a lot from your experience…..and glue alternative . 😂 quality as always👌🏽😎
@@colinblick8946 thanks mate 🤣
Bostin' job Sir Tim. If I hadn't seen you refurb that arm myself, I would have sworn it was a new one.
Ready for MOT now?
Thanks mate. The MOT was done a bit ago, this was something that was an advisory. As my car is perfect in every way, I even fix the advisories 😱
That's the best peace of engineering I've ever seen very cool video m8 👍👍
Thanks mate. Professional engineer me
You are a complete legend! Thank you for your videos!
You’ve very welcome, thanks for watching
😂😂great video....my daughter has lots of glue sticks and glue gun from school...weekend fix, drill all ball joints in my bm and inject them with glue sticks... ..thanks
It will drive like brand new!
Absolutely fcking brilliant, in the road, one Jack, pissing with rain, wondering if some granny is going to run you over… yes this truly is a real representation of working on one’s car 😆. Loving the ‘shitroen’ moniker and smattering of ‘shitter’ to describe and connections that will probably fail! Oh and the reference to the exhaust noise covering up the car falling apart…. Yes I too own a Shitroen… it all true. New subber here, loving the vid 👍
We only portray real world scenarios on this channel, and thanks mate 🤣
So engine performance boosted and now Lotus like handling restored.👍
Pinpoint precision in the corners
Oh god. You do know you are going to get a lot of idiots trying the glue gun trick. But because they didn't have the correct temperature setting it won't work lol 😂😂
That would be amusing. Lots might be an overstatement though, only about 7 people have watched it so far 😂
Superb
Thanks mate
Next up; repairing your head gasket using Elmer's glue
@@Alex-qm6ig SteelSeal 💪
Bien hecho amigo !
Yes good paint job and bush/ ball joint refurbishment to new standard. Amazing how ur freehand spraying missed all those unwanted areas.
Ive not used hot glue before but i have pumped polyurethane sealant/ glue into a few bushes before to harden them up !
I made this video weeks ago, and the hot glue is holding up well so far 😜
Eyup could I be cheeky and ask if ya will do a video of how to replace cig lighter for a USB charger. Who needs a shitty cig lighter in a car anyway 😂😂😂😂
Sounds like a plausible idea 🤔
Cheers. Look forward to it!
I'm amazed with the quality of that paintwork! Looks just like it is out from the factory!
Yor content is so valuable to us commoners. I'm pretty sure now you don't even know which sponsorship to accept and you swimming in cash.
Even the bushes looked brand new too 😂
My inspiration was videos of truck repairs in Pakistan. I think I’m doing almost as good of a job as they are?
sponsorship? everyone else is getting free jackery lithium power generator, welders, drill presses, car cleaning chemical and battle of the klans or vpn crap....most wont even do a video these days unless half of it is sponsored and showing the free stuff.
Well i bagsy swinging the sledge hammer
Messing aside , the wheel would leave you enough space to make the difference between breaking a few bones in your foot , or cutting it off ,,, referred to by those in heavy recovery as a survival space ,,, it may just make the difference ,, I hope you never have to test the theory , but you never know ,,,, and you still have a spare in the boot , so really it was only lazy that stopped you using two wheels stacked to make the job safer ,,,, that ratchet could be getting closer to me every day ,,,,
Nice work on the shixxer as usual
Thanks mate
It is okay to just replace one side? I did both last time the driver's side ball joint went, now, 40k miles later, it driver's side again.
Cheers.
In an ideal world they would be replaced as a pair, but it’s not important in the same way as something like brake pads that should always be replaced as a pair. The only benefit of changing both together is that if one is worn out then chances are the other isn’t far behind. It won’t cause any issues just changing one other than you may find yourself having to do the other side not long after. It’s common practice just to replace the damaged/worn out side.
@@StupidBlokeStupidVideos Thanks for the response. I'm just doing the worn side this time. Cheers.
@@StupidBlokeStupidVideos Well, I did it. The drop link was seized, had to hacksaw the bottom off, then the top, then go buy a new one. I didn't have a ball joint splitter, so had to batter, lever, hammer it. All in, the job took 5 hours. At least it pissed with rain the whole time.
@@BrownDaddy007 sounds like my kind of struggle
I'm confused. You went into some detail about applying the black paint to the wishbone but no detail, whatsoever, of what the green paint marks (clearly visible at 8:31 and 9:06) are for, where you should apply them or what shade of green they should be. Some randomly applied, left over, nail varnish to make it look factory?
Oh yea I forgot to show the all important green. It was a shade called “Jade Inspirational Empowerment” from the Rimmel London collection. Bought it off Kate Moss at a car boot.
WHAT A BODGE LOL
@@andrewtruckle5157 you spelled “professionally refurbished” wrong 🤣
Hello there, just recently found your channel and really appreciate your helpful tips and tricks. I followed your instructions on refurbishing my lower ball joint and the glue gun tightened up the joint really well, I was thrilled by the results. Unfortunately, my wife took the car to aquasize tonight and all went well until, for some unfathomable reason the front wheel parted company with the car as she turned into our drive, it bounced down the road and crashed through the neighbours front window. My wife subsequently lost control and hit my classic E type jaguar and pushed it into the garage door, which duly folded up and the car continued into the garage and through the rear wall. I spoke to my solicitor about this as my neighbour is sueing me for criminal damage and emotional and psychological assault. My solicitor said that it may be a good idea if I got your name and address, purely for routine reasons of course. Many thanks for the most informative vids. Paul
That does sound unfortunate, but you mustn’t have followed the procedure correctly 🤔
Hi, I just need to replace the lower ball joint, used your videos to get it all apart but cant seem to separate the ball joint from the wishbone. Is this possible or do you need to remove the whole wishbone and get a new one with the ball joint and new rubbers already fitted. Complete is £40, ball joint on itself is £15 but dont want to spend hours and hours trying to separate it for the sake of £25 difference and then its all new and replaced.
I’ve replaced the ball joint previously, but they don’t come out on all of them and the new one was such a piss fit that I had to weld it in. I’d just replace the full arm for what it’s worth tbh
Does it still come true if everyone knows
......
what you wished for when you pull that wishbone out though ??
Personally I wish I had a tin of paint as good as yours ,,, one quick dust and that looked just like a new wishbone .. [ for those who dont know }
having said that the old trick was to mix up a pull tin of body filler and load it into a brand new grease gun , pump it into worn king pins through the grease nipples , wipe off tye excess then put a dab of grease on so they look just greased , leave it for an hour to set , put the wheels back on and drive straight to psv .... [ or so Im told }
A bigger penis, but 🤫 or it won’t come true
Well I've never heard of this any idea how long it might last or is just a Russian bodge to sell the car
Fuck it, be reet
I have drilled holes in the dash to run a wire through and I have cut speakers in the plastic !! Love the videos mate.. you should put a buy you a pint donation on your UA-cam!! Your a legend !!
Thanks mate 🤣
lol...another quality repair/re-furb. Nice one mate.
Cheers mate
🥰
And the wine was most needed 😅😅 BUT it was a very interesting, technical, informative automotive video on the Shitter 👍👍
As always 😂
@@StupidBlokeStupidVideos of course 👍
😏
😜
Another award winning video. Quality work on the refurb
Thanks mate 🤣
Should have saved this one to go out on April fools day 2024😂😂😂😂bet there are a few that actually think you genuinely glued the ball joint, put a new Johnny on and fitted it😂😂😂😂
It was gonna be an April fools one, but I didn’t think it was good enough to fool anyone 😂
@@StupidBlokeStupidVideos it was good enough, almost fooled me🤣🤣🤣🤣🤣
Getting that bolt in absolutely sucked. It did not want to line up at all. Somehow managed smack it into alignment. Hopefully it won't fall out.
Great video as always!
There’s always a but of struggling involved with jobs like this 🤣
I’m amazed that you sprayed that arm this channel is turning into something very professional now..the commentary as always is sheer class 😂
I considered taking it for shot blasting and powder coating, but I’m happy with how the spray job turned out
@@StupidBlokeStupidVideos aye it looks dead good proper job 👌 and you saved yourself a fair bit too 👏
Is this what makes my car clonk randomly? Got my MOT in May and this might just be the most perfectly timed video ever 😅
It could be yea, ball joints knocking is near the top of the list of sounds I hate
@@StupidBlokeStupidVideos Baliffs knocking is my top of the list.
@@johndilloway9762 😂😂😂😂
Like the way you even put the green marks on with a felt pen to fool the mot man didn't fool me, or did you fool everyone, Hmmm🤫🤫🤔😅
Gotta keep those pesky MOT testers happy, but as I said on the river sill repair,.. MOT testers love it when you try to sneak a bodge past them!
@@StupidBlokeStupidVideos I know but you could hardly notice that repair, well not from the other side of a dual carriageway.
@@johndilloway9762 as long as it’s a national speed limit
Intro song?
Dunno, I just searched for a wishbone song on google. Pretty much all my videos have some sort of related intro music to the video 😂
@@StupidBlokeStupidVideos Found it, bloody hell your search history must make for interesting reading!
@@Ahmed____ incognito mode activated 😎
Do you think one day you could narrate a video in the same style David Attenborough would do on blue planet?
I’m not well spoken enough, but maybe I could narrate David Attenborough footage in my voice? “Look at this monkey fucking another one,.. etc etc”
@@StupidBlokeStupidVideos pmsl I think it would be an excellent piss take on a servicing video 😂
@@StupidBlokeStupidVideos Here we have a very rare nut and bolt, the male is entering the female, it's got to be a tight fit, and he's really giving it some, well didn't last long, he's all torque.😁
@@johndilloway9762 YES
Hot glue pmsl that's ace 😅
It’s cold now though 😀
You make it look easy ! yes !
It’s always easier to watch someone else do it YES
Just opened the wine........🍷🍷👍
Dropped the full bottle before the video was over? Haha
@@StupidBlokeStupidVideos yes, i was enthralled 👍
First!
Almost 😆
First. YES 🎉
YES. Congratulations, you’ve won fuck all 😂
@@StupidBlokeStupidVideos🤣