Do You know if si possible to disable this feature? My colorado has not the grill shutter due a crash, and My motor losed power due the fuel pump module code.... codes P059f and p069e
Ooh but first you need to make a fuel pressure test bro, because that codes(P069E and P059F) it’s looks like you have a real low or high fuel pressure on the system !!
@@danielscustoms13 but when I check the fuel pump module in the computer I only receive the air shutter failure, I checked and the lost of power is a kind of protection due the air shutter
Hi I have a 2014 Cadillac CTs 2.0 with I know it missing the active grill so I went to junk yard bought one put on it move I have code p1011 and p069e I clean MAF p1011 gone now I still have p069e. Do I need to check the shutter again? Or it is now is fuel control module issue. Thank
Relearn de new grill with a scan tool after repair, then check your throttle body clean and learn the correct position with a scan tool if the fail persists replace your throttle body!!
My friends dad accidentally ripped the bumper off and I had to remove the shutter for a few days because the brackets broke..... Now its reinstalled but the fuel pump module requested MIL is still there.... Everything works fine but i cant get the code to clear.... Do i need a bidirectional scanner to perform a relearn or something because the vehicle runs fine has no issues at all besides that code.... Ty in advance!
Yes you right, you need a scan tool with the function to relearn the grill, and double check the connectors because it's probably that you forgot connect once of these connectors !!
Whats a good cheap scanner that has relearn grill feature? I'm getting the same code when I just replaced grill assembly with motor. It had a sticker on it that said it needs to be flashed with a scanner @danielscustoms13
Hi I have a 2014 Cadillac CTs 2.0 with I know it missing the active grill so I went to junk yard bought one put on it move I have code p1011 and p069e I clean MAF p1011 gone now I still have p069e. Do I need to check the shutter again? Or it is now is fuel control module issue. Thank
![[UA] Eternal Fire проти NAVI | EPL Season 20 Malta](http://i.ytimg.com/vi/chvlsDygrZM/mqdefault.jpg)
Thank you very much!!!! that was exactly what was wrong with mine
From Houston tx. 2015 lacrosse same code furl pump module. I need a mechanic that can help me using your method
Do You know if si possible to disable this feature? My colorado has not the grill shutter due a crash, and My motor losed power due the fuel pump module code.... codes P059f and p069e
Ooh but first you need to make a fuel pressure test bro, because that codes(P069E and P059F) it’s looks like you have a real low or high fuel pressure on the system !!
@@danielscustoms13 but when I check the fuel pump module in the computer I only receive the air shutter failure, I checked and the lost of power is a kind of protection due the air shutter
I live in a really hot area so I am not going to use this grill that is why I won;t buy it
I have the same problem. Did you resolve it ?
So the active grille shutter caused the p069e code
@@RafaelFlores-t1f yes
Thanks brother that explains why it runs fine I do have a fault in my air shutter
Ty man makes sense y my engine light came.on after deer crashed from bumper my 2016 Colorado shutter all busted up..
Hi I have a 2014 Cadillac CTs 2.0 with I know it missing the active grill so I went to junk yard bought one put on it move I have code p1011 and p069e I clean MAF p1011 gone now I still have p069e. Do I need to check the shutter again? Or it is now is fuel control module issue. Thank
Relearn de new grill with a scan tool after repair, then check your throttle body clean and learn the correct position with a scan tool if the fail persists replace your throttle body!!
I got the same issue so can I just see if my plug unhooked it and plug it back up I don't have a scanner or nothing
Yeah 👍🏼 and double check is the actuator is working properly Up to down!!
I got a used one from the junkyard what are the two can I use or what do I need to reprogram it
Just plug and play!! And relearn procedure.
My friends dad accidentally ripped the bumper off and I had to remove the shutter for a few days because the brackets broke..... Now its reinstalled but the fuel pump module requested MIL is still there.... Everything works fine but i cant get the code to clear.... Do i need a bidirectional scanner to perform a relearn or something because the vehicle runs fine has no issues at all besides that code.... Ty in advance!
Yes you right, you need a scan tool with the function to relearn the grill, and double check the connectors because it's probably that you forgot connect once of these connectors !!
Whats a good cheap scanner that has relearn grill feature? I'm getting the same code when I just replaced grill assembly with motor. It had a sticker on it that said it needs to be flashed with a scanner @danielscustoms13
what's the model of the scanner?
AUTEL ULTRA
What kind or model autell system are you using
Autel MaxiSYS Ultra
Hey, I have the P0013 code as well as the P069E and P0101 codes. Could they all be connected, like one is setting the others off?
Pay attention on your MAF sensor probably this is the issue on your car !! Refer to P0101
@@danielscustoms13 thanks, I will start there first.
Hi I have a 2014 Cadillac CTs 2.0 with I know it missing the active grill so I went to junk yard bought one put on it move I have code p1011 and p069e I clean MAF p1011 gone now I still have p069e. Do I need to check the shutter again? Or it is now is fuel control module issue. Thank
tengo un malibu con ese problema lo revisare gracias por el video.
I have the same scanner, it won’t let me do the hot functions or active tests.. Do you need a special adapter to plug into OBDll port for it to work?
TRY TO COMMUNICATE THROUGH BLUETOOTH WITH THE VCMI YOU MAY HAVE COMMUNICATION PROBLEMS WITH THE MODULE
IS THE SAME OBD2 CONNECTOR
Thank you!!
It worked perfect!