Most Manufacturing Process of Nagina Dongi Pump // Production of Dongi Pumps in Local Factory …
Вставка
- Опубліковано 5 вер 2024
- Most Manufacturing Process of Nagina Dongi Pump // Production of Dongi Pumps in Local Factory
#Naginadongipump
#Mostmanufacturingdongipump
#Dongipumps
#Localfactory
#Productionofnaginadongipump
#amazingtechnologyprocess
Судя по скорости обработки- сделано из пластилина. Судя по чистоте привалочных поверхностей - перегонять должна нефть или что погуще, остальное прольется. Судя по сборке на стружку и пыль и отсутствию масла- работает меньше, чем её делали. 😂 А так ну молодцы, чо.
Продолжайте снимать видео. Очень интересно.
This pump is immediately ready for recycling.
Now, that is recycling! Always amazed by the process of sand casting. True craftsmanship!
The precision that these pumps are made is in a league of it’s own and surpasses ISO 9001 standards 😁
Utter BS you made up.
😂😂😂
They can build anything ,..Thumbs up to these Guys ,...
Some of these workers show actual contempt for the parts they are assembling. Throw it, slam it down, total disregard for sealing surfaces.
They ask what is sealing surface ,,lol😊
Don't tell them ..they can hold part and fill both sides of mold at same time no flipping lol😅😊
No they just knocking off the slag metal 😅
Don't think they are particularly happy in their work......but it's money
Finish product full of dirt, scale, crust, metal shavings, casting sand, and pumice… all hidden behind a thin veneer of green Chinese paint. 3rd World Technology at its finest 👍🏻
Yet another whiny boy who can't produce anything but bullshit comments !...Any of these guys can work circles around you!
Would like to see this and all other video , of finished product working please!
Eastern craftsmanship is awesome. I like to think of myself as capable of building anything. I can, but I would be on a learning curve. These fellows can routinely build anything. They have that King of skill.
Their humbling to watch!
El clásico man partiendo chatarra con un mazo😂❤
Great job👍Safety sandals at first🔥
The best part of this is the recycling of materials.
Yes, they are making crap from scrap.
I often see comments criticizing safety or workmanship. Those comments may be appropriate for us, but that place is not us. I have a high regard for the hard work and ingenuity shown here.
The engineering, materials and workmanship here are perfect for the product being manufactured. When a product is properly engineered, it can be produced with an adequate yield with people and equipment possessed by the manufacturer. If thick gaskets are used, for instance, finely machined mating surfaces are not needed. Specifying a tolerance that is tighter than needed for yield or performance will increase costs without improving quality or reliability. The material used here is recycled cast steel. It has known (to within needed limits) uniformity, strength, modulus, toughness, ductility, etc. The designers have assured that thicknesses and tolerances are appropriate for the material properties. I would not use it for manufacturing Formula I race car parts, but that's not what's being done here. That work safety practices that we see here are foreign to us, but they are appropriate for Pakistan (or India, if that is the case). That country has a long way to go before they will have work conditions similar to the western world, but they are progressing. If you want those people to starve, send them a million lawyers and safety inspectors. Also keep in mind that their cultural differences are reflected in their work places; you will probably never see any of these men come to work with a hangover.
I happen to agree with your point of view. An excellent summarisation of what you see here.
Perfeito!!! De acordo!!.
A long winded excuse for making garbage products.
@@snowflakemelter1172 Ah, another outraged armchair captain. Tell us more about your manufacturing skills
@@tabcreedence6553 I worked on hand making and machining items from scratch worth £40,000 each. Tell us about yours ?
The pump looks like a Loewe Wasserknecht from Germany, where they, we're made since the 1930s
Safe work enviorement 10/10
In a country where everything is recyclable so these types of factories are predominate on every street corner I’m still astonished by the amount and quantity of scrap metal which is available and also still unbelievable how they could acquire the materials they need for their production whats become obvious is the amount of craftsmanship creativity and knowledgeable they obviously possess to produce a great quality product
Imagine how nice they’d turn out if they weren’t throwing a fresh machined surface on top of another machined surface without a care in the world. What’s really amazing is their feet- if I do some light machine work in my shop I’m picking shaving splinters out for a week from everywhere. These guys walk around in flip flops and seem to be impermeable to metal splinters
@@wellscody86
People who do manual labor develop calluses, which are hardened areas of the skin due to prolonged exposure to irritation, friction, or pressure.
Calluses show up mostly on the hands and feet, but can show up anywhere.
В этом видео прекрасно всё: от литья из мусора до испытаний ОТК стаканом воды.
Ты и из мусора,такое не сделаешь
Ну почему мусор, чугун марки "какой отлили" ))))
Mad Max. Fury production.
,👏👏👏👍 залотые руки. Здорово
Cool they turned a lathe into a mill. Did not get 100% clean up though :(. That’s an NCR bud.
She will be going back for rework.
Посмотрел эти видео.. Вывод прост.. -всё что делают эти люди это изготавливают те или иные детали станков или механизмов... п о х о ж и е на оригиналы!! Именно -похожие!!! Ни о каком качестве литья или механической обработки речь не идёт!!! Уверен.. моторесурс и долговечность работы этих изделий на таком же примитивном уровне как и процесс изготовления.. Про культуру производства.. ? -это катастрофа! Дешевле? Ну и зачем мне подобная цена.. если это не будет работать!??
Bravo.......clever.......u use waste oil.........cheers
Bana nagina ka pump rahy thy akhir main daimand ka pump dikhaya😀
Need to see it in use at the end!
Изготавливали одну модель а в конце крашеную по форме где видно плунжер показали другую
Good lord, that borer shaft has about 3mm of runout!
As long as the cutting edges are running concentric, the shaft doesn't matter.
I think it was the carriage moving back and forth. The gibs must be loose or the ways are worn out. Large cutting forces will do that to unhardened ways after a while. These people don't worry about cutting forces unless the motor stalls out. If it does they just slap a bigger motor on it.
What did I just watch? Are those pumps made to last a few hours?
Secret to success, crooked threads.
Good night Irene...
Salam walekum.
Sar aapane dockey pump ka video banaya hai Jo karkhane mein ban raha hai.
Ek aur pump aata hai jise kahate Hain bottle water pump video banakar bhej do karkhane ka kaise banta hai.
German engineers would get apoplexy seing this.
But how are the leather cup seals made?
they have modern equipment.....
Cleaner then a bakery down the street on these videos 😊
To these guys, OSHA is just a faraway town in Wisconsin USA.....lol
24:50 I don't really know how those bolts we're able to line up. Given how recklessly the holes were drilled. No measurements or anything.
I'm guessing that they used a "good sized" clearance hole.
Allah guides their hands 😇
The Force
The pattern had the locations on it!@@DinoNucci
Ahh yes, the old line it up with your calibrated, precision ,knee trick. 😂
What is the warranty period for the pump?
It ends when leaving the factory.
You purchase a lot of these pumps?
@@sheikhkhalid5969 God save me from such purchases.
😄@@nandofigueira2005
@@nandofigueira2005 😊😆😂🤣
I wanted to know what durability guarantees they give on these poor quality constructions, which require precision in their construction, for the Indian market or other similar markets maybe it would be good..
They have amazing workshop repairing those pumps in every village.
I'm either in awe or SMH at the guy carrying away red-hot castings with a hook while wearing shorts and sandals.
👍
Are the Company sells this water pumps in europe or in Germany?
With this poor quality, they will go to recycling after a week at the most and turn into a sewing machine. Reincarnation is real...
9:35 nothing like having runout in your boring bar, I mean cylinders don't need to be round or true. SMH
Какой кошмар!
технология 20-х годов. Естественно, не 21 века )))
Most manufacturing process? You would think, all this time and effort, and todays technology, having a translator, and wording things correctly, in the video title, would be part of the video process.
And how many languages are you fluent in?
@@stevebell4906 Pretty good with english, that's why I posted the comment.
I don't know how much it costs for a cope and a drag there but whoever owns them could sell the lot and retire
Garbage in - garbage out. 12:40 drilling is a great example of low accuracy machining. They simply do not care about the quality beyond the "best quality" sticker.
The guy who has to work on these: " Where the hell were these made, Pakistan, India?"
Hard working.but no safety.
اس پمپ کی قیمت کتنی ہے اس وقت؟
😮😮😮😮😮😮😮😮😮❤❤❤❤❤❤❤
Нда
Living in the 1800s 😂
O
Wow!
I bet this shop depopulates every year a small town and also create every year a new army of handless and footless beggars.
Это Украина!
Сколько стоит такой насос?
Около 15 тыс паскистанских рупий. Или примерно 5 российских
super crap pot metal to make crap products..
an endless line of whiny boys who who never run out of bullshit comments about men who work circles around them every day!