I need somebody to come up with an invention to turn someone’s voice, into energy. My mother in law would be able to power a whole city, and anytime she slowed down, I’d just have to open another beer.
Smaller drum is an alternator, generating electricity. If I'm guessing correct the larger drum has a stator with angled magnets to create continuous spin. Most alternators need at least 500 rpm to generate, so to compensate for low RPM the magnets must be sizeable. There also has to be a rectifier to maintain electric flow in one direction only, and of course a voltage regulator to protect the circuits. It can be done, but I would've put a thermometer in front of that heater just to prove
This is the best one yet, and this makes all the generators you can buy at harbor freight home Depot Lowe's obsolete, just like you have encased in this plastic you can in case the noise if there is until it improves later on. You guys got it. I'm just hoping you can sell this you can if the government doesn't stop you or someone buys you out and then no one would have it again for decades again.
It is powered by a rare isotope of Phlotiston, which has a half-life of 0.0002854 microseconds. The Phlogiston is phase-linked to a pre-sebulated fracktation dynamo, which is restorated wih a quadrature basis instabulator. The instabulator is cam-threaded to formulate maximum de-congruence with the generational fribstack device.
The "heater element" is made of led lights and produces no heat. It's current requirements are less than .2 watts. The large "lightbulb" display is also led and it's current requirements could easily be met by 6 D-cell batteries in incorporated in the display board itself. Put this contraption on a live stream for 12 hours. Let's see how long it survives.
But why bring it up? Are you stating that anyone who uses the dollar is gullible? Or that the dollar is less real than some bogus "perpetual machine"? What's your point?
No matter how well built, there is always friction. Mechanical friction means the device will always slow down and eventually stop and electrical friction (ohms resistance) means you will always get less out than you put in. Nothing of this universe defies the laws of motion and thermodynamics.
@@barryfoster7786 The flywheel inside the device, if it is built really well will keep the generator running for some time but if unplugged it will eventually stop. The moment you attach an electrical device to it it will act like a brake and rapidly stop it. Even if left plugged in, the moment you plug an electrical device in it will slow down until nearly stopped, it will just take a little longer. One of the basic laws of thermodynamics is that you can not create or destroy energy. You can only transform it or transmit it. Another basic law of mechanical and electrical devices is that everything is subject to friction and part of motion imparted to a machine or current to electricity will be lost to heat because of friction which is the second law of thermodynamics. That is why you can never get more out than you put in.
@@kevinsoria4856 La terre ralenti comme ce volant d'inertie ralenti, et il s'arrêtera éventuellement. La terre à reçu l'énergie de Theia lors de la collision des deux qui à donner la rotation sur elle même et l'inclinaison. Le terre ralenti depuis ce temps. La lune nous ralenti aussi et s'éloigne de la terre aussi.
@@surf2257 oui et peut importe le pourquoi du comment sa n'empêche pas quel tourne sans s'arrêter, non au contraire la terre accélère mdr comme quoi la science
The generating unit is assembled with multiple flywheels and connected to a generator on frictionless bearings .The flywheel shaft is accelerated slowly with a variable speed external Induction motor. Motor power is disconnected when generator attains required RPM. Generator shaft continue to rotate until the inertia developed by flywheel is over. The output will be near to input given by Induction motor.
i made a prototype magnetic generator when 9 using cheap materials like carboard and cheap magnets . Spun around by itself and the next step was finding a small and cheap enough hand crank generator to create power that met the lower force requirements and had a very very low budget back then. The ideal came from playing with two magnets having them push and pull each other apart, the hope was getting one small light bulb to produce light and was playing hooky and reading way to much back then that was partly my parents fault for giving me caffeine late in the day. Trouble sleeping, skip and take a nap. Chocolate and Pepsi. skipped twice a week needing a day to recover from the lack of sleep
Also the frequency is bouncing and spiking up to 70hz. This will damage any sensitive electronic equipment, you can only really use non inductive loads such as incandescent lamps and heating elements that are not so quite sensitive to this kind of fluctuation, even then could be quite problematic over a period of time
Уже давно изобрели частотные преобразователи! Вы просто выходное переменное напряжение подключаете к мощному частотному преобразователю, который сначала выпрямит переменное напряжение с изменяющейся частотой, затем преобразует постоянное напряжение опять в переменное но уже с постоянной частотой. Всё просто как велосипед. ))) Frequency converters have long been invented! You simply connect the output alternating voltage to a powerful frequency converter, which first rectifies the alternating voltage with a changing frequency, then converts the direct voltage back to alternating but with a constant frequency. Everything is simply like a bicycle. )))
@@alrehmatshirani8831 He will take the money happily and maybe sent this thing to you too but it wont work like he is showing. Because there is not free energy like in this video.
It's not charged... It's a breaking system that allows the magnents to pull against themselves which kicks in when switched on. It will last as long as the EMF is strong, could be several decades. There is a reason we are sticking to finding ways to boil water to turn a turbine with gas and oil and it's nothing to do with science. It's about profit.
It's full output is about half a watt, for about half an hour. Do the math. A 500 watt "real" space heater would stop it in about 45 seconds. Energy in equals energy out minus energy consumed. (friction and or load)
There could be disguised batteries everywhere in this thing. The "heater" may be just an LED display producing no heat, and may have a battery inside helping to power the "generator". The light panel may have any number of batteries mounted on the back side, also powering the "generator". The motor has a box mounted to the top which is large enough to contain a battery. Who knows what may be inside the big drum. The circuit area may have batteries mounted behind the LED displays. The object on top of the upper shelf on top of the circuit area may be a battery. The three large objects meant to look like capacitors may actually be batteries. Even the frame itself could contain stacks of cells.
He literally plugged it in. The capacitors could have held charge that long. If ut us generating it won't keep it going. But charging the capacitors like that will keep it going for the video.
Your biggest breakthrough is maintaining the RPM, but you really need to run a time-lapse video of say 24-120 hrs with numerous devices connected to add credibility
I have few questions. 1) why we need to start this machine with utility power source? The white cylinder could be an energy storage device with a dummy axial and pulley. That explain it need initial charging. 2) why we doesn’t see rpm drop (and return to normal if it has rpm regulation) as machine is first loaded (by a seemingly heating element) device? 3) same question as 2) on light bulb panel. 4) Heating stand normally draw more than 0.7A. More likely 3-5 Amp.
1) a car works very similiar, it needs a battery to power up the starter and start the engine turnover it can stay running on that feeding the energy back to the battery. Good questions though.
All your stupid questions are answered on the company's website. Also, they sell the device for $15,000 and claim the costs are recouped in 2 years. They have been in business for 14 years and hold several patents for the technology.
The device has a cost which is why it has to be called cheap energy. Its an investment that pays out with time. If you build it correctly it can run 15/20 years continuously until you change part/s that wear out. Well done. Edit: Also instead of using electricity to power it up just use a hand-crank handle.
Thank you for saying that 😅❤️👌 I'm still stuck on it being plugged in from the start , because if you hand crank it? THAT will help imagine the applications for the new people 😉
@@303storm But in order to receive the final result called 'free energy'...you must pay for such a device. So again it's cheap or very cheap energy, not free. Stop calling it wrong.
I saw a video of a generator some guy made, it was big and had a lot of magnets on the rotor, and a normal copper wire-wound field, and he used just a 9 V battery and a small motor to run it with. It was putting out 240 V AC and even had a circuit that recharged the 9 V battery.
A good point, maybe they figure out how to use and manipulate magnetic forces with this 9 volt battery to allow greater magnetic forces to push or detract magnetic forces but the point is to push and keep momentum going, I'm not sure. Of course I don't know any of these fields of technology. But I know it is there waiting for us and it's being held back. Thanks to the greedy greedy greedy gas and oil industries. These companies live on a sea of money and can stop anything that comes in between and threatens their income. Why do I say because they are richer than all the governments to me. Think about how much you pay each month for gas in your car your house and whatever else that you do not pay to the government each month.
@@explorinlearnindoing5462 - This was about 10 -12 years ago, and I've occasionally looked on YT for it, but can't find it. Maybe the 'power companies' that be 'talked' to him and got his mind right...
@@mentalmelt - I saw on the Internet were crooked machines and slimy subhuman Democrats stole an election for a mental midget, and now he’s in the process of ruining the country… And that’s fucking sure true.
Fly wheel ups ... firstly we rotate wheel to its maximum speed using motor. When we turn off supply of motor its changes to dynamo (ac genrator) ... speed of wheel decrease slowly and we can maintain output voltage by using pwm. Its used to give backup for 2 to 5 mints in industries also in airports .
That's what I was thinking, a very heavy flywheel as well seeing how long that powerful motor took to spin up when it was connected to mains power, combined with the relatively low load it was put under for a very short time. If I see a Livestream of them running something high draw, like a saw or something for a long period of time with no loss of rpm I'll believe it. However that won't happened because the laws of thermodynamics are things that exist
At least, they got one thing right. So many of the other designs had no speed regulation, and would either run away with insufficient load, or would stall immediately with too much load. Using a proper variable frequency drive for the motor maintains a constant speed, regardless of load. That's been my main criticism for these feedback loop mechanical motor/generator type machines. Something to maintain/regulate speed, as well as compensating for changes in load.
@Jack Burton Its honestly astonishing what has been hidden away from us all in the name of greed and power ! But its slowly starting to come out jow tho and hopeful wont be to long before everyone has one of these in their homes to have some free energy and stop paying all these robbing gits called the government, electric companies and more
unfortunately this is a technology that is not much talked about by the mainstream media, but it would be a great chance for humanity to take a big leap in technology and development.. people who live in cities, countries, 'underdeveloped' this technology would help them get out of poverty quickly.. but unfortunately I don't see the companies, the government. take a keen interest in it
If the people of this country (USA) actually had a grasp, even partially understood what has been going on here in America and worldwide in regards to the continual electromagnetic warfare that has been actively directed by our enemies as well as our own military/intel organizations upon civilians here as well as civilians of allies and hostile nation states; I can say, without hesitation, that 100% of this informed population would immediately drop whatever they were doing, pick up some pitchforks and torches and head to HQ of every organization that is complicit in this program of war crimes and dismantle these locations brick by brick. Torch everything inside and rebuild from the ashes that litter the ground. They are participating and enabling the most egregious human rights violations and denial, of civil and cognitive liberties that has EVER taken place on this planet.
@@rilerson don't forget that any such device will reduce the profits of companies that generate electricity by burning fossil fuels - and this is not allowed and is not condoned
Üdvözletem! Nézem ennek az áramfejlesztőnek a mechanikus méretét. Ez nagyjából akkora, mint egy 1KW-os villanymotor. Tételezzük fel, hogy ez a rendszer működőképes, akkor is, hogyan jön ki ebből a kis méretű áramfejlesztőből 10KW ráadásul azzal az egysoros, kissé laza ékszíjjal?
the magnet cylinder is absorbing and transforming the dark energy into movement, the dark energy turns into normal energy, light, heat, etc. very simple this machine and meets the laws of thermodynamics. In the Enterprise all coffee machines use this principle!
My design is similar but with more output and additional features. The applications are naturally endless. I do recommend however deep cycle battery banks for reclamation to allow harvesting of the collected energy. This will also allow the system to restart without the need of an outside power source. Excellent work indeed. Only through free thinking can we truly unlock the mysteries of science.
Not so "funny" when you understand how it works. The frequency is determined by the speed of the motor armature. Did you notice the difference in pulley diameters? Looks about 5 to 6 to me. The "thing" that looks like a generator is just a very massive flywheel, designed to maintain it's rpm within 10% of the original speed for about....... hmmm....the duration of this demonstration?
How did you able to regulate the load to the RPM of the motor? More load means more torque needed for the generator, and you have nothing to regulate the torque. I think it's a total BS
I am electrical engineer and I can tell you that this systems works. there are some safety rules to respect by the choose of componantes to make the machine be secured. my system is full automatique and it works perfectly. How it is suppose to work (I mean a automatic system): the componant are an Alternator for example 15 kva, a AC motor of 1.1 kw, a 12 v DC motor, 4contactors, 4 relays, arduino uno, two flywheel, four bus battery 12v . appropiate cables. the rest is iron that you will buy. an inverter 220v to 12 v. 1- the AC motor will be started first by the microprocesor arduino uno. it will be supply by the batteries. it will run untill the setup rpm. is the mico controler detects for example let us say 2800 rpm. it stops the supply of the DC motor. the Generator is now producing alternative current 2- to this level the flywheel have acquiert anought energy of inertia to maintain the system and almost the same rpm. they help to the stabilisation off the speed during the switch of motor. I mean DC off and AC on this done by the micro controller. the AC motor is now supply by the alternator. 3- the microcontroller calculate the speed and regulate by assisting the AC motor if the speed is lower than 2800 rpm due to the time of switch. it calculate the frequency and keep it stable on 50 herzt or 60 herzt it depends to the settings in the microcontroller per programation. 4- the genarator is now stable and it produce a well filtered alternative current. the DC motor is off but still turning. the Microcontroller supply and electronique system to charge back the batteries up to the maximum and stop it. the Alternator is now full started. all this is put in place in the space of 15 seconds. this kind of generator can pull out up to 2000 kva. in big scales it can supply industries. my what'sup number 00237651788158.
I was looking for something else, but I am seriously amazed by how many people are thinking this actually works. Unless you proof that our physics laws are incorrect this can not work due to friction resulting in energy loses.
dude, you got it wrong. ever heard of magnet - magnet motor? also, its a valid design. you always get it wrong, when you talk about law of conservation of energy. here magnetic energy is converted into mechanical energy and then to electrical energy, there is just conversion occurring here, not creation. study well before saying its free or creating energy. ok?
He could charge his batteries directly without that motor and generator more efficient, also it would save him a lot of weight for his acrylic power bank.
Lol why battery that is a 10 kw setup to have a 10kw setup in battery would take 10× the space and weight it anyway a good solution if your power getting off for some time
It's not violating the laws of physics. Thank God the magnets as stored energy similar to a battery. It can take a lot of energy to make a battery. Maybe there's an efficient way to make them without a lot of energy but as it is I believe that takes a lot of energy probably more than that machine puts out over the life of the machine
Suggestion: quit using the belt drive and move in with a magnet:magnet drive train. You can disengage the motor from the generator when overload, but no parts to repair or replace over time.
Certainly an obvious good idea, but for the purpose of demonstration and credibility, the belt may have been deliberately chosen, but only for the prototype version.
They can't disengage the motor form the generator. If you look at the wires the motor is the generator and the generator becomes the motor. They use one phase of the three phase "motor" to power the " generator" . Notice no other wires in and out of the "generator"
Small-minded people like you are jealous because you're not smart enough or creative enough to be the next Tesla. Your jealousy has reduced you to sniping at real inventors -- no doubt from the computer in your mother's basement.
replace the bearings with maglev bearings and attach the motor directly to the shaft. then contain the entire system in a vacuum to eliminate air friction. attach output of power to a joule thief circuit to amplify the voltage output to the circuits and store excess in high density capacitors to act as a booster to jump the motor system if it slows at all. we have had this tech for ever. its about putting it all together correctly. your system works well but there is a lot of improvement that can be made. hope my input helps even just a little
ok i get the idea . it looks good. what i don`t understand is why don`t you have a battery with a inverter to start itself..charge itself then use the extra power to run what ever ????
"The ammeter on the device displays incorrect information, since it was not set up correctly. Output voltage 220V, current 20A, power with load 4.5kW. Load on lamps 1.1 kW, fan 400 W, heater 2.5 kW"? Really? 1. The bulb set is 100 LED's pulling 2.4 watts each = 1.1 Amps at best. (Probably 3 watt rated bulbs) 2. The "heating unit" which as a standard would run 1500 watts if it were not an led mock up. Your LED element needs to include a fading control to simulate a real heating element as they do not glow that bright as quickly as your did. The 0.7 Amps shown on the display proves my observation. 3. The video at no point included the fan mentioned in your statement. This indicates the amp meter is fairly accurate and shows the low current draw on the battery and or capacitor set supplying the short term energy requirement. I would welcome you to disprove my assessment but sadly you can not. I study power conservation and generation as a hobby hoping one day to at least trip over something that could help our world, not to gain wealth as so many are solely interested in.
I think this idea is possible with the right exact measurement. I'm currently building a prototype for a concept I came up with. I'm not exactly sure if my project will be what I want it to be, such as creating more energy than I put into it though I am almost certain what I'm doing hasn't been publicly done before. My thoughts of everything I have came across before is that the devices are lacking complex design. Example would be of the comparison of someone presenting a cumbustional piston vs presenting a fully capable vehicle engine with timing, fuel and air mixtures, cooling, and so on. The lack of the right complex design is the reason most concept prototypes do not work as intended.
@@MrSummitvilleOne man's junk is another man's treasure, thus the success of garage sales! Oh yeah, and don't forget that Google, who owns UA-cam is owned and operated by DARPA in partnership with the DIA, CIA, and the NSA. They prefer to keep the status quo by ensuring that fossil fuel and nuclear fallout culls/slow kills our enslaved, hypnotized, complacent asleep popoulation. Free energy exists: perhaps not here, but on this planet right now. It's our job to demand it be released to protect our planet and the life on it from extinction. Open source, unpatented technology will be dusrupting the Cabal's efforts.
replied to you You are set in your beliefs and dogmas even though there are facts everywhere that much of our technology has been classified by the military industrial complex. My facts stem from direct involvement through my military uncles: Airforce, Maj Gen Irving L Branch, who was the Commander of the Test Flight School at Edwards Air Force Base from 1961-1966, and from 3 star Army General Lt General F.K. Mearns, who was commander of Kelly Barracks in Stuttgart Germany in 1972 and was in the DIA. I can't, and don't care to prove anything to you, as, even if you were shown a working device, (not to say this one isn't a pile of junk to scam money from people) you are basing all of your beliefs on mis-information from faulty physics that you believe is true. False premises abound in our sciences. It wasn't that long ago that the sick were believed to be healed by bloodletting. How do we feel about that "science" now? Do you remember when people thought it was a "conspiracy" (a catch-all word designed to pigeon hole and invalidate whatever someone is proposing to be true) that our own intelligence agencies were compiling our personal information (violating our Constitutional right to privacy -treason)? Then we discovered from Snowden and others, that in fact, it was true. For God's sake, wake up to the fact that it's no coincidence that Regina Duggan was the head of DARPA and later made latteral moves to Google and now Facebook. How many smoking guns do you need to see before you can be humble enough to realize that there are advanced energy programs that are not based on our antiquated and perhaps faulty sciences? The first barrier to learning anything new involves realizing that you don't know it all already. Open your mind, not your wallet, and your ensuing fear-mongering diatribe on people being ripped off by a pile of garbage. Unity energy, torus energy, free energy, whatever you want to call it, exists. To think that multi-trillion dollar oil cartels wouldn't want to kill and suppress it, is foolhardy!
It's easy sir put a rotor in every corner of your wheels and connect it into charge controler and battery. Thank me later sir, im a quiet person and a lot of ideas , but the sad part is i don't have a materials and tools.
here's the problem I have with this. There's no search party to investigate your claim. There could be anything in that white round box. It could be a couple of car batteries. Extraordinary claims require extraordinary proof. I see none.
You also gotta think thou that is he gunna give away his secrets to the hole world. UA-cam would probably take the video down aswell cos people could mass produce these to power there homes for free.
my nephew has been making these in school now in 8th grade, you are an idiot if you do not believe and commercial grade free energy electromagnetic motor is possible.. GO BACK TO YOUR CAVE!!
Power is first built up in the magnets or is stored in solid state form and than relessed i think but i could be wrong. My question magnets loose its magnatism over time which begs the question how long can this thing run for with what load. if this is known than you have created a battery storage device but thats not what its meant to be is it now. Even if it does this its still good as you can charge it with solar and run it at night if it can hold enough charge ?
@@StrykeaDay I'm more worried by his electricity bill he will pay....that device draws about 4000W from the other floor socket he forgot to show,under the machine.......😁😁😁
The funny thing is, instead of the voltage dropping, because connecting more devices, the voltage increases and the generator rotation remains the same. comedy kkkkkk!
Did not like . You have to show how many VA watts you have consumed from the power grid. Then show how many watts you have in the heater and other loads coming from the machine.
The thermal dynamics are in the earth's electromagnetic shield. This devise depletes it a little. There is no such thing as an electrical free lunch. If these types of generators became common, we may loose our shielding against gamma rays.
I have a doubt... someone please help me with this... i dont know any genuine source to clear doubts in physics... Doubt: Does the magnetism of a permanent magnet decrease with prolonged fluctuation in its magnetic field?
@@thecommunistowl811 there might be some kind of tech which might be able to do that in that device... I am saying this because nowadays no machine can produce outputs with maximum efficiency... It is actually possible to generate more than we supply if efficiency of the generator is way higher than the motor... It is possible... But i am not sure that it is what is happening here... 😁
@@augusnoblethomas6565 if the efficiency is above 100% then you would create more energy than you put in, that is true. But you can never have a machine at or above 100% efficiency due to the laws of thermodynamics. Free energy is completely impossible no matter how advanced our technology
@@thecommunistowl811 no... thats not true... its possible... its just that we dont have the right technology... say for example the SEARL Effect generator... even if there is the right technology available, i doubt our chances of actually using them... big giants in current power generation sector wont let us have it since it can no longer be the millionaires they are if such a tech develops... Sir Nikola Tesla is the best example for this... laws of thermodynamics are theories based on currently available information... it can be broken... scientific theories are changeable... a few centuries back everyone believes earth is flat "scientifically" but not we know flat earth society is the dumbest thing ever... Science is subjective to change... when time comes we will be able to generate energy more than what we usually produce... i am a mechanical engineer... and i know what i say is crazy... but i hope there will be a better tomorrow... Yeah, you are write according to the present thermodynamic theories it is not possible for machines to be fully efficient... well... we dont want them to be fully efficient... even a 70-80% efficient machine can make a huge difference in the society...
U8duhmagictoaster NO FUCKING WONDER YOUR DUMBER THAN BURNT BREAD ! poor little boy ! & his antiquated mind. YOUR NOT WORTH THE EFFORT ! WHEN YOU GROW UP... COME BACK AND I'LL POINT EWE IN THE RIGHT DIRECTION !
So as the Tesla been forced to admit. Luckily, he breaks laws in that time. If he'd covered his eyes and says "yup, AC can't do the job"...than, we would be living in darkness.
Troll of revealations: Inside of device is emty just a bearing and super capacitor inside connected to that white wire, while on socket the capacitor charges up and when disconnected has enough juice feed motor spin and bulbs for some time. Also as it shows 222volts @ 0.7 amps while heater connected so output is 222*0.7= 155,4 Watss while this typical heater consumes 1500 watts :D ok Led bulb on now it shows 222volts @ 1.8 so bulbs made aditinal 1.1 ams and watts 222*1.1 =244.2 wats / 100 lamps = 2.4 watt per lamp but as those bright typical led lamp are 12 watt each so thats 1200 wats :D SO this device is 100% alien technology legit
thefretfiend powered by ignoring laws of thermodynamics? Before they started teach laws of thermodynamics, one third of cars in America was electric. That implicitly tells that all electrical motors already use free energy.
Efficient solar power systems are available for free energy but some initial investment. Solar thermal energy is abundant near equator but God knows what we are upto. Wind energy as well.
Watch the belt! If the power transfer was motor pulling pulley on the big studded white thing, then teh bottom belt woudl be loose, which it is. However if the big white thing becomes the prime mover then the lower belt should tighten, which it does not. The search goes on...
not true! watch carefully in the beginning, the motor runs anti clockwise so its pullung the upper side of the belt! due to 25frames per second video it looks like running clockwise when it speeds up
I need somebody to come up with an invention to turn someone’s voice, into energy. My mother in law would be able to power a whole city, and anytime she slowed down, I’d just have to open another beer.
that's the goodone :)
Microphone
Haahahaha
JAJAJAJ 😅🤣🤣
Respect mothers in law....babysitters are expensive.
Unbelievable. If true this could be the best invention of entire human history.
это обман....его убили за этот обман...
Smaller drum is an alternator, generating electricity. If I'm guessing correct the larger drum has a stator with angled magnets to create continuous spin. Most alternators need at least 500 rpm to generate, so to compensate for low RPM the magnets must be sizeable. There also has to be a rectifier to maintain electric flow in one direction only, and of course a voltage regulator to protect the circuits. It can be done, but I would've put a thermometer in front of that heater just to prove
NO, the large drum has a hamster in it.
@@squeakeththewheel you’re a fkn idiot lmao, I read your comment and at first, I was like wha??? But then it hit me… well done
This is the best one yet, and this makes all the generators you can buy at harbor freight home Depot Lowe's obsolete, just like you have encased in this plastic you can in case the noise if there is until it improves later on. You guys got it. I'm just hoping you can sell this you can if the government doesn't stop you or someone buys you out and then no one would have it again for decades again.
if this really worked, everyone in the video would have already been murdered by big oil mercenaries
The magnets in this video won't last forever, and so will this engine( I don't know its name in English).
there is no "if", this Science has been replicated many times over and over what are you trolls even referencing?
He was, about a year ago. Shop burnt to the ground and he was found dead inside.
@@germanedesign1 really? The name of the man?
Are you crazy?
This just might be the energy source I've been looking for to power my anti-gravity drive.
Good one! 👍 🤣
You just need one point one twenty one giga watts for the flux capacitor.
Was thinking about the same thing
it works pretty well in my time machine so go for it
This is not an anti-gravity drive, it's a perpetuum mobile drive.
It is powered by a rare isotope of Phlotiston, which has a half-life of 0.0002854 microseconds. The Phlogiston is phase-linked to a pre-sebulated fracktation dynamo, which is restorated wih a quadrature basis instabulator. The instabulator is cam-threaded to formulate maximum de-congruence with the generational fribstack device.
Yeah yeah I’m an Alien 👽 also!!!
The "heater element" is made of led lights and produces no heat. It's current requirements are less than .2 watts. The large "lightbulb" display is also led and it's current requirements could easily be met by 6 D-cell batteries in incorporated in the display board itself. Put this contraption on a live stream for 12 hours. Let's see how long it survives.
I think it use 220 v stabilizer or 220 to 48 v inverter and convert it to 220 for that reason he use fan
I was anticipating a change in tension of the belt due to increased load on the generator. Maybe the load wasn't big enough.
…and you know this how? Do YOU manufacture that heater and light panel?
The heating rods from the heater will never glow before heat within 2 seconds.
@@IsakHashani exactly.
Proof that gullibility is perpetual.
Brilliant
Ya, keep using the dollar, that's the only true thing on earth
@@NwoDispatcher What does the dollar have to do with this ?
@@noguardrails47 gullibility
But why bring it up? Are you stating that anyone who uses the dollar is gullible? Or that the dollar is less real than some bogus "perpetual machine"? What's your point?
No matter how well built, there is always friction. Mechanical friction means the device will always slow down and eventually stop and electrical friction (ohms resistance) means you will always get less out than you put in.
Nothing of this universe defies the laws of motion and thermodynamics.
No it’s basic math put 2 ams in and gat 10 out
@@barryfoster7786
The flywheel inside the device, if it is built really well will keep the generator running for some time but if unplugged it will eventually stop. The moment you attach an electrical device to it it will act like a brake and rapidly stop it.
Even if left plugged in, the moment you plug an electrical device in it will slow down until nearly stopped, it will just take a little longer.
One of the basic laws of thermodynamics is that you can not create or destroy energy. You can only transform it or transmit it.
Another basic law of mechanical and electrical devices is that everything is subject to friction and part of motion imparted to a machine or current to electricity will be lost to heat because of friction which is the second law of thermodynamics.
That is why you can never get more out than you put in.
@@oldtimefarmboy617 oui mais pourquoi la terre s'arrête t'elle pas de tourné ?
@@kevinsoria4856 La terre ralenti comme ce volant d'inertie ralenti, et il s'arrêtera éventuellement. La terre à reçu l'énergie de Theia lors de la collision des deux qui à donner la rotation sur elle même et l'inclinaison. Le terre ralenti depuis ce temps. La lune nous ralenti aussi et s'éloigne de la terre aussi.
@@surf2257 oui et peut importe le pourquoi du comment sa n'empêche pas quel tourne sans s'arrêter, non au contraire la terre accélère mdr comme quoi la science
The generating unit is assembled with multiple flywheels and connected to a generator on frictionless bearings .The flywheel shaft is accelerated slowly with a variable speed external Induction motor. Motor power is disconnected when generator attains required RPM.
Generator shaft continue to rotate until the inertia developed by flywheel is over. The output will be near to input given by Induction motor.
i made a prototype magnetic generator when 9 using cheap materials like carboard and cheap magnets . Spun around by itself and the next step was finding a small and cheap enough hand crank generator to create power that met the lower force requirements and had a very very low budget back then. The ideal came from playing with two magnets having them push and pull each other apart, the hope was getting one small light bulb to produce light and was playing hooky and reading way to much back then that was partly my parents fault for giving me caffeine late in the day. Trouble sleeping, skip and take a nap. Chocolate and Pepsi. skipped twice a week needing a day to recover from the lack of sleep
Also the frequency is bouncing and spiking up to 70hz. This will damage any sensitive electronic equipment, you can only really use non inductive loads such as incandescent lamps and heating elements that are not so quite sensitive to this kind of fluctuation, even then could be quite problematic over a period of time
So its indirectly also an E.M.P devoce
Уже давно изобрели частотные преобразователи! Вы просто выходное переменное напряжение подключаете к мощному частотному преобразователю, который сначала выпрямит переменное напряжение с изменяющейся частотой, затем преобразует постоянное напряжение опять в переменное но уже с постоянной частотой. Всё просто как велосипед. ))) Frequency converters have long been invented! You simply connect the output alternating voltage to a powerful frequency converter, which first rectifies the alternating voltage with a changing frequency, then converts the direct voltage back to alternating but with a constant frequency. Everything is simply like a bicycle. )))
Existen los rectificadores
Would be perfect for charging batteries
Use a battery and this as charger
Charge it up from the mains for 10hrs and it will run for 9hrs. It's a miracle!
That part seems to fly over most of their heads! haha. so many scams on the net.
You cannot destroy the Laws of Thermodynamics by putting a "Whiz-bang" machine in a plexiglass box...
@@alrehmatshirani8831 Im out of stock atm, but are you interested in buying a bridge? It's in really good condition
@@alrehmatshirani8831 He will take the money happily and maybe sent this thing to you too but it wont work like he is showing. Because there is not free energy like in this video.
It's not charged... It's a breaking system that allows the magnents to pull against themselves which kicks in when switched on. It will last as long as the EMF is strong, could be several decades. There is a reason we are sticking to finding ways to boil water to turn a turbine with gas and oil and it's nothing to do with science. It's about profit.
Ok. Now let's see a long term load test using the full output over a long period.
If you let a 10% reserve as long as something brakes
It's full output is about half a watt, for about half an hour. Do the math. A 500 watt "real" space heater would stop it in about 45 seconds. Energy in equals energy out minus energy consumed. (friction and or load)
na 3 jaar zal het wel al grootschalig in produktie zijn. Jammer dat men het hier in Glasgow niet over had. Wie wil je voor de gek houden?
There could be disguised batteries everywhere in this thing. The "heater" may be just an LED display producing no heat, and may have a battery inside helping to power the "generator". The light panel may have any number of batteries mounted on the back side, also powering the "generator". The motor has a box mounted to the top which is large enough to contain a battery. Who knows what may be inside the big drum. The circuit area may have batteries mounted behind the LED displays. The object on top of the upper shelf on top of the circuit area may be a battery. The three large objects meant to look like capacitors may actually be batteries. Even the frame itself could contain stacks of cells.
the siemens 4kw motor could be a battery and the flywheel is running by an hamster thats inside the alternator! :O
et si ma tante en avait...on l'appellerai mon Oncle...!!
I feel sorry for you.
He literally plugged it in. The capacitors could have held charge that long. If ut us generating it won't keep it going. But charging the capacitors like that will keep it going for the video.
The heating rods from the heater will never glow before heat within 2 seconds.
Has you company shipped any of the 8kw or 15kw magnetic generators yet?
It's unlikely, this company is joke
Only a real Engineer, will show how this machine is made and the guts of it.
This is just what I need to power the crashed UFO I have in my back yard. Thank you.
Your biggest breakthrough is maintaining the RPM, but you really need to run a time-lapse video of say 24-120 hrs with numerous devices connected to add credibility
I agree
The génératrice doesn t seem to be 10kwbu its size
Fréquence seem un stable. It me ans ok for Light or hein élément but not for motors
One day it stops to run. We can not cheat 2nd Law Of Thermodymamics.
Selam nasyapdın
I have few questions.
1) why we need to start this machine with utility power source? The white cylinder could be an energy storage device with a dummy axial and pulley. That explain it need initial charging.
2) why we doesn’t see rpm drop (and return to normal if it has rpm regulation) as machine is first loaded (by a seemingly heating element) device?
3) same question as 2) on light bulb panel.
4) Heating stand normally draw more than 0.7A. More likely 3-5 Amp.
1) a car works very similiar, it needs a battery to power up the starter and start the engine turnover it can stay running on that feeding the energy back to the battery. Good questions though.
good qvestions and remarques indeed.
And the heating rods from the heater will never glow before heat within 2 seconds
@@ShipsoftheOceans the car in your message runs on petrol fuel that need to kick start by a battery. This machine is runs on electric.
All your stupid questions are answered on the company's website. Also, they sell the device for $15,000 and claim the costs are recouped in 2 years. They have been in business for 14 years and hold several patents for the technology.
The device has a cost which is why it has to be called cheap energy. Its an investment that pays out with time. If you build it correctly it can run 15/20 years continuously until you change part/s that wear out. Well done.
Edit: Also instead of using electricity to power it up just use a hand-crank handle.
Thank you for saying that 😅❤️👌
I'm still stuck on it being plugged in from the start , because if you hand crank it? THAT will help imagine the applications for the new people 😉
No it's FREE EVERY because there is no input other than get it started
@@303storm But in order to receive the final result called 'free energy'...you must pay for such a device. So again it's cheap or very cheap energy, not free. Stop calling it wrong.
What kind off bullshit. There are no perpetuum mobiles. Your running of the battery that sits on top
@@zendesigner You are brainwashed by the flawed/manipulative teachings of a sick / fucked up society.
I saw a video of a generator some guy made, it was big and had a lot of magnets on the rotor, and a normal copper wire-wound field, and he used just a 9 V battery and a small motor to run it with. It was putting out 240 V AC and even had a circuit that recharged the 9 V battery.
A good point, maybe they figure out how to use and manipulate magnetic forces with this 9 volt battery to allow greater magnetic forces to push or detract magnetic forces but the point is to push and keep momentum going, I'm not sure. Of course I don't know any of these fields of technology. But I know it is there waiting for us and it's being held back. Thanks to the greedy greedy greedy gas and oil industries. These companies live on a sea of money and can stop anything that comes in between and threatens their income. Why do I say because they are richer than all the governments to me. Think about how much you pay each month for gas in your car your house and whatever else that you do not pay to the government each month.
Which video?
@@explorinlearnindoing5462 - This was about 10 -12 years ago, and I've occasionally looked on YT for it, but can't find it. Maybe the 'power companies' that be 'talked' to him and got his mind right...
Well, if you saw it on the internet it must be true.
@@mentalmelt - I saw on the Internet were crooked machines and slimy subhuman Democrats stole an election for a mental midget, and now he’s in the process of ruining the country… And that’s fucking sure true.
Fly wheel ups ... firstly we rotate wheel to its maximum speed using motor. When we turn off supply of motor its changes to dynamo (ac genrator) ... speed of wheel decrease slowly and we can maintain output voltage by using pwm. Its used to give backup for 2 to 5 mints in industries also in airports .
That's what I was thinking, a very heavy flywheel as well seeing how long that powerful motor took to spin up when it was connected to mains power, combined with the relatively low load it was put under for a very short time. If I see a Livestream of them running something high draw, like a saw or something for a long period of time with no loss of rpm I'll believe it. However that won't happened because the laws of thermodynamics are things that exist
Generator RPM must be 400 , motor RPM 1500 wheel RPM 2000
At least, they got one thing right. So many of the other designs had no speed regulation, and would either run away with insufficient load, or would stall immediately with too much load. Using a proper variable frequency drive for the motor maintains a constant speed, regardless of load. That's been my main criticism for these feedback loop mechanical motor/generator type machines. Something to maintain/regulate speed, as well as compensating for changes in load.
@Jack Burton Its honestly astonishing what has been hidden away from us all in the name of greed and power ! But its slowly starting to come out jow tho and hopeful wont be to long before everyone has one of these in their homes to have some free energy and stop paying all these robbing gits called the government, electric companies and more
unfortunately this is a technology that is not much talked about by the mainstream media, but it would be a great chance for humanity to take a big leap in technology and development.. people who live in cities, countries, 'underdeveloped' this technology would help them get out of poverty quickly.. but unfortunately I don't see the companies, the government. take a keen interest in it
If the people of this country (USA) actually had a grasp, even partially understood what has been going on here in America and worldwide in regards to the continual electromagnetic warfare that has been actively directed by our enemies as well as our own military/intel organizations upon civilians here as well as civilians of allies and hostile nation states; I can say, without hesitation, that 100% of this informed population would immediately drop whatever they were doing, pick up some pitchforks and torches and head to HQ of every organization that is complicit in this program of war crimes and dismantle these locations brick by brick. Torch everything inside and rebuild from the ashes that litter the ground. They are participating and enabling the most egregious human rights violations and denial, of civil and cognitive liberties that has EVER taken place on this planet.
Well?
@@rilerson don't forget that any such device will reduce the profits of companies that generate electricity by burning fossil fuels - and this is not allowed and is not condoned
Please make a company sell like that generators, to serve humanity, good job, thank you.
يا أخي الغرب لا يعمل من أجل الإنسانية.
They never bring it out. Pre order but no progress. What is the point?
Üdvözletem! Nézem ennek az áramfejlesztőnek a mechanikus méretét. Ez nagyjából akkora, mint egy 1KW-os villanymotor. Tételezzük fel, hogy ez a rendszer működőképes, akkor is, hogyan jön ki ebből a kis méretű áramfejlesztőből 10KW ráadásul azzal az egysoros, kissé laza ékszíjjal?
the magnet cylinder is absorbing and transforming the dark energy into movement, the dark energy turns into normal energy, light, heat, etc. very simple this machine and meets the laws of thermodynamics. In the Enterprise all coffee machines use this principle!
I also have such a coffee machine.
@@rolfegger272 your phone no please
My design is similar but with more output and additional features. The applications are naturally endless. I do recommend however deep cycle battery banks for reclamation to allow harvesting of the collected energy. This will also allow the system to restart without the need of an outside power source.
Excellent work indeed. Only through free thinking can we truly unlock the mysteries of science.
Greater than 10KW? Wow, how much?
Prototype 500kw still in testing stage.
@@NYRM1974 Would that be enough to supplement my 12 volt solar panel?
Wwow thats too much kw do you have a photage a video or anything because at the end of the day it's just talk.
@@educationaltechnology8363 I think this guy is on the up and up. Upping his bank account by suckering the gullible.
Funny how the frequency jumps from 60 to 50 Hz when the machine is unplugged - without the rpm sound of the motor changing at all.
Not so "funny" when you understand how it works. The frequency is determined by the speed of the motor armature. Did you notice the difference in pulley diameters? Looks about 5 to 6 to me. The "thing" that looks like a generator is just a very massive flywheel, designed to maintain it's rpm within 10% of the original speed for about....... hmmm....the duration of this demonstration?
@@timhallas4275 it's nonsense
@@timhallas4275 I'm not sure it's even that sophisticated. More likely hidden batteries/supercapacitors.
How did you able to regulate the load to the RPM of the motor? More load means more torque needed for the generator, and you have nothing to regulate the torque. I think it's a total BS
I am electrical engineer and I can tell you that this systems works. there are some safety rules to respect by the choose of componantes to make the machine be secured. my system is full automatique and it works perfectly. How it is suppose to work (I mean a automatic system): the componant are an Alternator for example 15 kva, a AC motor of 1.1 kw, a 12 v DC motor, 4contactors, 4 relays, arduino uno, two flywheel, four bus battery 12v . appropiate cables. the rest is iron that you will buy. an inverter 220v to 12 v. 1- the AC motor will be started first by the microprocesor arduino uno. it will be supply by the batteries. it will run untill the setup rpm. is the mico controler detects for example let us say 2800 rpm. it stops the supply of the DC motor. the Generator is now producing alternative current 2- to this level the flywheel have acquiert anought energy of inertia to maintain the system and almost the same rpm. they help to the stabilisation off the speed during the switch of motor. I mean DC off and AC on this done by the micro controller. the AC motor is now supply by the alternator. 3- the microcontroller calculate the speed and regulate by assisting the AC motor if the speed is lower than 2800 rpm due to the time of switch. it calculate the frequency and keep it stable on 50 herzt or 60 herzt it depends to the settings in the microcontroller per programation. 4- the genarator is now stable and it produce a well filtered alternative current. the DC motor is off but still turning. the Microcontroller supply and electronique system to charge back the batteries up to the maximum and stop it. the Alternator is now full started. all this is put in place in the space of 15 seconds. this kind of generator can pull out up to 2000 kva. in big scales it can supply industries. my what'sup number 00237651788158.
Machine how much money
Hitting you shop and mobile number
This generator very nice I am on trick ok
How long it could stand giving full voltage?
And I was impressed how fast that ROPE LIGHTING lit up for heat!
HAHA> Best heater ever! OF course, if you want actual heat it might be best to put the element back in it instead of red LEDs.
I was looking for something else, but I am seriously amazed by how many people are thinking this actually works. Unless you proof that our physics laws are incorrect this can not work due to friction resulting in energy loses.
You also need to move the system to show us ( proof) whether it is connected to the supply from below or not
with 4M+ views this is definitely a successful machine
best point i have heard in a while....
All you nay sayers are not seeing the big picture here. If we can hook this up to an electrix inflator, we can finally resolve the flat earth issue!
I got a electolux vacuum cleaner but it doesn't inflate anything.
YMMD :D
Life sucks and blows
This is optimistic comment we need
I'm going to Learn you " How to become a Carpenter " !
There needs to be new laws put into place to protect inventors that are building free energy devices, and to protect the people that look to use them
so 18 months later where is it, havent seen it in the shops
georgeh big oil companies wouldn’t want this in public they are probably assassinated by now
just check the house monthly electric bill of the inventor....we can get instant verification..
You need a transmission between the gen, and the magnet barrel. like a car but hand built -small better rpms for the generator
How long does it take for the Kebab burner to be ready after plug in? :) :)
As long as it takes to recharge the hidden batteries in the drum
The most impressive here is the heater consuming only 0.7*220 ~ 154W which is great for such a size, patent it first!
Check that small electric cord going to that heater very tiny
The "Globalists" have lied to us about everything else. Who is to say that we were not lied to about free energy?
why arent u mining bitcoin 24/7 then?
Typically you need 1350w for just a small miner. This definitely isn't kicking out enough power.
The best comment here! HODL long, HODL strong! Salute
dibbla 10kw is enough for 7 miners ant miner s9s
Against law of conservation of energy. I assume in the white cylinder they placed some mini genset.
dude, you got it wrong. ever heard of magnet - magnet motor? also, its a valid design. you always get it wrong, when you talk about law of conservation of energy. here magnetic energy is converted into mechanical energy and then to electrical energy, there is just conversion occurring here, not creation. study well before saying its free or creating energy. ok?
More likely just an alternating electromagnet under the floor.
@@seshagiri5536 Yeah, nah. You don't have a clue. Not one.
How much are they? How long do they last I know magnets can lose their power and it takes a lot to charge them back up
Hi!
how many cost of 10 KW GENERATOR of your products in India with your shipping charges.
He could charge his batteries directly without that motor and generator more efficient, also it would save him a lot of weight for his acrylic power bank.
Lol why battery that is a 10 kw setup to have a 10kw setup in battery would take 10× the space and weight it anyway a good solution if your power getting off for some time
How do these inventors manage to keep violating to the laws of physics with their free energy magnet motors? It's amazing.
the laws of physics are just how man discovered reality. That does not mean that there is more than that
The "Globalists" have lied to us about everything else. Who is to say that we were not lied to about free energy?
It's not violating the laws of physics. Thank God the magnets as stored energy similar to a battery. It can take a lot of energy to make a battery. Maybe there's an efficient way to make them without a lot of energy but as it is I believe that takes a lot of energy probably more than that machine puts out over the life of the machine
I'm not a naysayer, I'm just gonna break your bubble and remind you of physics.
Suggestion: quit using the belt drive and move in with a magnet:magnet drive train. You can disengage the motor from the generator when overload, but no parts to repair or replace over time.
Certainly an obvious good idea, but for the purpose of demonstration and credibility, the belt may have been deliberately chosen, but only for the prototype version.
They can't disengage the motor form the generator. If you look at the wires the motor is the generator and the generator becomes the motor. They use one phase of the three phase "motor" to power the " generator" . Notice no other wires in and out of the "generator"
This is exactly the part I have bin looking for to finish building my time machin and go back to the year 3018.
No, this part is too outdated and lack of power. You will stuck in an indefinite spacetime if you used that broken thing.
Small-minded people like you are jealous because you're not smart enough or creative enough to be the next Tesla. Your jealousy has reduced you to sniping at real inventors -- no doubt from the computer in your mother's basement.
replace the bearings with maglev bearings and attach the motor directly to the shaft. then contain the entire system in a vacuum to eliminate air friction. attach output of power to a joule thief circuit to amplify the voltage output to the circuits and store excess in high density capacitors to act as a booster to jump the motor system if it slows at all. we have had this tech for ever. its about putting it all together correctly. your system works well but there is a lot of improvement that can be made. hope my input helps even just a little
A ten klínový řemen odhadem 13mm vydrží přenášet výkon 10kW při tak malém obvodu řemenic???
ok i get the idea . it looks good. what i don`t understand is why don`t you have a battery with a inverter to start itself..charge itself then use the extra power to run what ever ????
"The ammeter on the device displays incorrect information, since it was not set up correctly. Output voltage 220V, current 20A, power with load 4.5kW. Load on lamps 1.1 kW, fan 400 W, heater 2.5 kW"?
Really?
1. The bulb set is 100 LED's pulling 2.4 watts each = 1.1 Amps at best. (Probably 3 watt rated bulbs)
2. The "heating unit" which as a standard would run 1500 watts if it were not an led mock up. Your LED element needs to include a fading control to simulate a real heating element as they do not glow that bright as quickly as your did. The 0.7 Amps shown on the display proves my observation.
3. The video at no point included the fan mentioned in your statement.
This indicates the amp meter is fairly accurate and shows the low current draw on the battery and or capacitor set supplying the short term energy requirement. I would welcome you to disprove my assessment but sadly you can not. I study power conservation and generation as a hobby hoping one day to at least trip over something that could help our world, not to gain wealth as so many are solely interested in.
I think this idea is possible with the right exact measurement. I'm currently building a prototype for a concept I came up with. I'm not exactly sure if my project will be what I want it to be, such as creating more energy than I put into it though I am almost certain what I'm doing hasn't been publicly done before. My thoughts of everything I have came across before is that the devices are lacking complex design. Example would be of the comparison of someone presenting a cumbustional piston vs presenting a fully capable vehicle engine with timing, fuel and air mixtures, cooling, and so on. The lack of the right complex design is the reason most concept prototypes do not work as intended.
drive.google.com/file/d/1_1iYngFYG5ovwpBt7FN9HrpWSoDB6KFI/view?usp=drivesdk there is many ways how to produce free energy.
Is this device for sale in 2019 in the United States and can it power a home? Are the inventors still alive?
@@MrSummitvilleOne man's junk is another man's treasure, thus the success of garage sales! Oh yeah, and don't forget that Google, who owns UA-cam is owned and operated by DARPA in partnership with the DIA, CIA, and the NSA. They prefer to keep the status quo by ensuring that fossil fuel and nuclear fallout culls/slow kills our enslaved, hypnotized, complacent asleep popoulation. Free energy exists: perhaps not here, but on this planet right now. It's our job to demand it be released to protect our planet and the life on it from extinction. Open source, unpatented technology will be dusrupting the Cabal's efforts.
replied to you
You are set in your beliefs and dogmas even though there are facts
everywhere that much of our technology has been classified by the military
industrial complex.
My facts stem from direct involvement through my military uncles: Airforce,
Maj Gen Irving L Branch, who was the Commander of the Test Flight School
at Edwards Air Force Base from 1961-1966, and from 3 star Army General Lt
General F.K. Mearns, who was commander of Kelly Barracks in Stuttgart
Germany in 1972 and was in the DIA. I can't, and don't care to prove
anything to you, as, even if you were shown a working device, (not to say
this one isn't a pile of junk to scam money from people) you are basing all
of your beliefs on mis-information from faulty physics that you believe is
true. False premises abound in our sciences. It wasn't that long ago that
the sick were believed to be healed by bloodletting. How do we feel about
that "science" now? Do you remember when people thought it was a
"conspiracy" (a catch-all word designed to pigeon hole and invalidate
whatever someone is proposing to be true) that our own intelligence
agencies were compiling our personal information (violating our
Constitutional right to privacy -treason)? Then we discovered from Snowden
and others, that in fact, it was true. For God's sake, wake up to the fact
that it's no coincidence that Regina Duggan was the head of DARPA and later
made latteral moves to Google and now Facebook. How many smoking guns do
you need to see before you can be humble enough to realize that there are
advanced energy programs that are not based on our antiquated and perhaps
faulty sciences? The first barrier to learning anything new involves
realizing that you don't know it all already. Open your mind, not your
wallet, and your ensuing fear-mongering diatribe on people being ripped off
by a pile of garbage. Unity energy, torus energy, free energy, whatever you
want to call it, exists. To think that multi-trillion dollar oil cartels
wouldn't want to kill and suppress it, is foolhardy!
Sure, the same one is working in my power plant giving me 500000 MWattt.
Przy podlaczeniu piecyka lub tych zarowek nie widac zadnego opciazenia na pasku klinowym i pradnicy dlaczego
I would like this system to be installed in my electric car to go around the Earth several times ...
precisely What I have been searching for.
It's easy sir put a rotor in every corner of your wheels and connect it into charge controler and battery. Thank me later sir, im a quiet person and a lot of ideas , but the sad part is i don't have a materials and tools.
@@xdavex797 welcome to elon musk company thank me later btw.😅
Does your electric car float on water as well?
How much this set up costs? And when will it be available in the market?
I also plugged my phone in a 120v outlet, after I unplugged it the phone stayed on! Free energy!
It's only free energy if you bypassed your electricity meter :)
Energia : Eletro - Magnético
Contínua : Energia :contínua
Permanente !!!! ; Na Koreia :
Ótimo !!!! Parabéns !!!!!!.............…
It's only free if you hook into the overhead power lines.....For you!
if it is a 10 KVA it should provide around 45 Amps, the demo showed 1.8 amp max
While I know this video is two year old. Is there any chance of getting a list of what I need to make a similar unit to try this myself?
Don’t be an idiot. It’s gullible fools like you that encourage this sort of garbage
Sure. Run to walmart and pick up an extension cord and plug it in the wall.
Go look at their patents.
here's the problem I have with this. There's no search party to investigate your claim.
There could be anything in that white round box. It could be a couple of car batteries.
Extraordinary claims require extraordinary proof. I see none.
You also gotta think thou that is he gunna give away his secrets to the hole world. UA-cam would probably take the video down aswell cos people could mass produce these to power there homes for free.
my nephew has been making these in school now in 8th grade, you are an idiot if you do not believe and commercial grade free energy electromagnetic motor is possible.. GO BACK TO YOUR CAVE!!
This is nice , but guy's should try with wacuum cleaner, hairdryer and washing machine.
That would be a really good test.
Looks like they built if outta an old washing machine :)
how long does it take before they are sold in Germany
I can construct for you, fuelless generator but it depends on kilowatts you demanded
Power is first built up in the magnets or is stored in solid state form and than relessed i think but i could be wrong. My question magnets loose its magnatism over time which begs the question how long can this thing run for with what load. if this is known than you have created a battery storage device but thats not what its meant to be is it now. Even if it does this its still good as you can charge it with solar and run it at night if it can hold enough charge ?
Magnetic load they will turn 300 years then u can throw the magnets away.
@@frankysplace7105 but after those 300 years you can recharge a magnet. we can turn most metals in magnets
magnets dont store no energy ... ??? the hell is wrong with you all ?
@@StrykeaDay I'm more worried by his electricity bill he will pay....that device draws about 4000W from the other floor socket he forgot to show,under the machine.......😁😁😁
All that the nay-sayers and skeptics on here are saying is: ‘I can’t do this’. If you guys were around 120 years ago, we wouldn’t even have cars.
Never seen a idler pulley on the driver side of a belt before
This is the secret of this useless UPS
It's not a saw mill......idiot !!
Haha nice try
That's the idea... it generates, and powers the motor that drives it and everything else as well.
where there you located and your Phone number is
Lo tienes a la venta o es un prototipo de muestra y si puedes contestar la pregunta esperó su respuesta varón.
I've been talking about this for ages, but am by no means an engineer. Glad someone's going for it
The funny thing is, instead of the voltage dropping, because connecting more devices, the voltage increases and the generator rotation remains the same. comedy kkkkkk!
Notice no one making any claims, you know law suits and all !!!
I would like to see a 12,000 BTU inverter air conditioner working with this prototype!😃
What's your initiative?
Flywheels are great for storing energy but sadly they are not generators.
not even a good flywheel if you look closely...
Did not like . You have to show how many VA watts you have consumed from the power grid.
Then show how many watts you have in the heater and other loads coming from the machine.
@POTENCIALIZADOR DE ENERGIA GRATIS
what the fuck would that prove?
I loved off grid power. I like the magnet power design. Excellent project 👍
amigo enterate bien, esto es una mentira que solo busca visitas para monetizar el video.
You’re welcome 🙏
But remember, first thing you have to do is shown at 00:00-00:02 - "plug in the power cord" :)
I have a question will this Generator stop working because of the energy loss?
Nice, I’ll get version 2.0 - the patch that includes thermodynamics
The thermal dynamics are in the earth's electromagnetic shield. This devise depletes it a little. There is no such thing as an electrical free lunch. If these types of generators became common, we may loose our shielding against gamma rays.
It's a miracle! No heat generated, no friction from the pullies, 10,000% efficient! They will be billionaires soon! Lol!
@@glidercoach or they will killed by oil tycoon 😂
@@prayerpatroller That's nonsense, get a clue, man
Dear sir I need magnetic field generator?
I have a doubt... someone please help me with this... i dont know any genuine source to clear doubts in physics...
Doubt: Does the magnetism of a permanent magnet decrease with prolonged fluctuation in its magnetic field?
Over a very long time yes, but the problem with the video is that it's claiming to produce more energy than is put into the motor which is impossible.
@@thecommunistowl811 there might be some kind of tech which might be able to do that in that device... I am saying this because nowadays no machine can produce outputs with maximum efficiency... It is actually possible to generate more than we supply if efficiency of the generator is way higher than the motor... It is possible... But i am not sure that it is what is happening here... 😁
@@augusnoblethomas6565 if the efficiency is above 100% then you would create more energy than you put in, that is true. But you can never have a machine at or above 100% efficiency due to the laws of thermodynamics. Free energy is completely impossible no matter how advanced our technology
@@thecommunistowl811 no... thats not true... its possible... its just that we dont have the right technology... say for example the SEARL Effect generator... even if there is the right technology available, i doubt our chances of actually using them... big giants in current power generation sector wont let us have it since it can no longer be the millionaires they are if such a tech develops... Sir Nikola Tesla is the best example for this...
laws of thermodynamics are theories based on currently available information... it can be broken... scientific theories are changeable... a few centuries back everyone believes earth is flat "scientifically" but not we know flat earth society is the dumbest thing ever... Science is subjective to change... when time comes we will be able to generate energy more than what we usually produce... i am a mechanical engineer... and i know what i say is crazy... but i hope there will be a better tomorrow...
Yeah, you are write according to the present thermodynamic theories it is not possible for machines to be fully efficient... well... we dont want them to be fully efficient... even a 70-80% efficient machine can make a huge difference in the society...
You must sell this in pieces, that we can assemble after delivery. It will be smashed to bits by customs.
Not by customs, but by betrayed *_customers_*
What happened to the website? does not exist
Who cares? They didn't have anything for sale, just some CGI of unavailable devices.
It hurts how many people believe this...
@Dave Smith thermodynamics: am i a joke to you
It's like religion. Man made stories violating universal laws.
U8duhmagictoaster
NO FUCKING WONDER YOUR DUMBER THAN BURNT BREAD !
poor little boy !
& his antiquated mind.
YOUR NOT WORTH THE EFFORT !
WHEN YOU GROW UP...
COME BACK AND I'LL POINT EWE IN THE RIGHT DIRECTION !
It is very possible my dear
I8THEmagictoaster it’s true it’s common sense
Hello.
I have a question.
Can I buy the exact construction manual?
I bet this is where flat earthers come when researching hobbies.
flat earth is real. only idiots think its a spinning magic ballsack
@@horizon2667 He actually meant the real one. Not your childhood DIY model...LOL!!!
AMAZING... YOU FOUND A WAY TO HIDE THE BATTERY!!!
Issac Newton would be proud of you. You defeated thermodynamics!
Big Bang theory did it first. Salute
remember breaking laws of physics will get you an F at MIT
So as the Tesla been forced to admit. Luckily, he breaks laws in that time. If he'd covered his eyes and says "yup, AC can't do the job"...than, we would be living in darkness.
I think, we all break laws..
Are they laws of nature or incomplete human laws about nature that some scientists theorize?
Troll of revealations: Inside of device is emty just a bearing and super capacitor inside connected to that white wire, while on socket the capacitor charges up and when disconnected has enough juice feed motor spin and bulbs for some time. Also as it shows 222volts @ 0.7 amps while heater connected so output is 222*0.7= 155,4 Watss while this typical heater consumes 1500 watts :D ok Led bulb on now it shows 222volts @ 1.8 so bulbs made aditinal 1.1 ams and watts 222*1.1 =244.2 wats / 100 lamps = 2.4 watt per lamp but as those bright typical led lamp are 12 watt each so thats 1200 wats :D
SO this device is 100% alien technology legit
What does the generator work with?
Powered by ignorance.
IGNORANCE is always displayed by fretting fiendslimes like you !
Yours for sure!
thefretfiend powered by ignoring laws of thermodynamics? Before they started teach laws of thermodynamics, one third of cars in America was electric. That implicitly tells that all electrical motors already use free energy.
no, greed for ad money.
Machine putting out more power than it consumes..innovative energy fantastic
Efficient solar power systems are available for free energy but some initial investment. Solar thermal energy is abundant near equator but God knows what we are upto. Wind energy as well.
How many cycles are they good for though? If 10,000 cycles then yes I'm in.
Bad bearings, belt whine, guys in sweatpants... looks legit....lol
Please show how it works( design)
>?Why did you change the design from the initial 1Kw prototype? which had the coils on the outer ring?
Watch the belt! If the power transfer was motor pulling pulley on the big studded white thing, then teh bottom belt woudl be loose, which it is. However if the big white thing becomes the prime mover then the lower belt should tighten, which it does not. The search goes on...
Well spotted, the belt tension and drive direction give it away 😱
not true! watch carefully in the beginning, the motor runs anti clockwise so its pullung the upper side of the belt! due to 25frames per second video it looks like running clockwise when it speeds up
@@rikbach2369 1.27 and 2.04, I am still not convinced there are not two big batteries stashed inside.
You have absolutely no proof of that. The belt is held in tension by an idler pulley. Are you fucking blind? Or just stupid?
Ah, I understand, the winner of " Korea Has Talent " in the catergory magician, now with that plastic box to Penn and Teller....
funny!
How can i get this...
I want it for my house
Cute. Will they ever go on sale?