Lovin Mavises hair do, show her who’s boss make her keep it . I think the word you was searching for Chop’s is butterflies lol keep em coming bud there keeps us saline 💪👍👍👍
Brilliant video again Chopsie thanks again. Am starting to think my 701 needs to get err “chopped in” for a 690 now you showed us all these extra parts available😳
Excellent! Been missing the next instalment. What a weapon this machine is going to be, love that billet fuel filler. Don’t worry about Mavis, just run a bath, light some candles and she’ll be fine again. 👍
Another entertaining & interesting vid. That 690 will be a real show stopper when you finish. You won't want to ride it & get it mucky lol. Actually I bet you can't wait to ride it!
I fitted a pair of KTM rotating footpegs ~ they’re pretty good when wearing MX style boots, no missed gears... looked sharp too. I can’t remember if they were Ti too.
That tail tidy looks awesome. However, I'm not a big fan of tail lights with integrated indicators on cars as they're often very hard to see when the vehicle is braking. You're ones are even smaller and probably even more difficult. Just make sure you use the highway code sequence of mirror, signal, manoeuvre (brake) to give those following the best chance of recognising your intentions.
I love that there's so many great parts available for the 690 these days. 500 exc are great but for me SMCR offers that extra practicality without that much hoonage compromise
What you need to do with the footrest springs is put a lolly stick in the carrier as you push the spring and pin through, then remove the lolly stick 😊👍
i knew there would be a tekmo dance clip in there lmaooo i like that tail tidy i ended up going with the setup crashking did on his 690 with the drc tail light and instead of getting the r&g bracket i got a cheap chinese one from ebay and it is actually great quality was very surprised lol
Great I've just pulled the trigger on a grey and red 21 plate 690 which is leaving me skint forever now I need to buy a house so I can remortgage it for all these goodies! What would Mavis advise....
Looking good Chops. I fitted an Oberon clutch cylinder to my Aprilia Dorsoduro, made no difference to feel/performance of the clutch, but........ worth it for the peace of mind of knowing you'll not have any future issues for some time. Grumps.
They do fail on the 690 and 701, I know of one person who's failed and many people have commented there's have gone. They don't make a big difference to clutch feel on the 690 as there is no room to make them bigger. But they are just better quality
chops what have you done mirror wise wanted the one bar end but can't fit it with the handguards apparently have u got the wind protection but not connected to bar end?? cheers
Really enjoy the rebuilds, just shows what can be done and let's face it... if you can do it.. anyone can🤔😂😜 Oh by the way, what do you do with the original parts? If your anything like me you'll have a garage and shed full..
Hi Do you find the key cover a bit of a loose affair that will rub paint of your top tubes eventually chops,or do I have unfortunately got a defective item obviously very rare from mototek
Awesome that you got the Tekmo silencer, lucky bastard, remember you said it was pricey, hope it's worth it as I may end up having to pay full price for it if it is
@@LambChopRides You keep making the vids and we'll keep watching dude. Got my team LCR hoodie and tee on the way, thanks for the weekly sanity reset buttons chops 👊🏻👊🏻👊🏻👊🏻
Look forward to the video on the blow off vavle on your H2 Have you removes the pair system on your H2 🤔 be interest to see it removed completely the pipes etc there alot going on under a H2 around there
There is a prescribed distance between the rear indicators if you want the bike to pass an MOT I do not think the ones you have fitted will comply - too narrow
For your H2 with the recirculation valve you might get onto boost quicker vs an atmospheric valve it will have to rebuild all the boost it lost from going off throttle.
Nice tail tidy, won't pass MOT, indicators have to be 15" apart, so you could get a pull for that, Is there not something about E ratings on light reflectors?. I could be wrong just pointing it out, anybody know better let me know as I do like the combined light unit
I think yes your right but I've seen bikes with similar setups pass MOT. Need to take it somewhere with some common sense, worse case I will swap it back to stock for mot. 30 minute job
@@LambChopRides I have seen a few bikes fitted with them & I do have the same light strip I got from China,(not fitted) I just don't like giving a smart arse copper the opportunity to give me a pull & then talk down to me.
Just bought myself a 2020 SMCR after watching your videos! Gets delivered in 2 weeks and I’m already looking at aftermarket parts! Do you still have the arrow end can? What sounds best?
I've heard the H2 brake issue you mentioned is actually the ABS unit. The bike comes with decent Brembo calipers and imagine the pads it came with are pretty decent?
If you go to Cerakote.com and in the menu look for “find an applicator” it will show you businesses in your area that are able to apply it. I think it was originally developed as a coating for firearms but has now been adopted by many other industries.
Chops. Love the integrated tail tidy, 2 questions. Does it include a number plate light? Do they do it for the Husky 701 Supermoto? Great video, looking forward to the next one 🤩🤩🤩
@@LambChopRides BTW, are you happy with your Rottweiler add ons? I have a 2010 690 SMC and getting the itch to move away from some of the stock bits...
I have a couple of questions 1st how much weight have you reduced from the bike and 2nd just how much longer will the lockdown be in effect ? The bike is coming together nicely
Weight question is a good one, I honestly don't know yet as have weighed stock stuff and not the new parts so results are skewed atm. Also planning a competition to guess the total loss 😁 lockdown is in effect until March I think currently..
Loving this video series! I was between the 690/701 SM and the 690/701 Enduro, but ended up going with a 701 Enduro for a bit more off-road ability. Picking it up today! But I still get lots of ideas for fun bits to put on from your videos. Who knows, I might have to do an SM conversion for when I'm feeling spicy! BTW, do you know if the tail tidy fits a 701 Enduro?
No managed to avoid import on fuel filler and tailtidy and headlight! Got caught for the exhaust. Seems if value is around £100 you might get away with it
I love how Mavis always mumbling along in the background🤣
*I've just witnessed this lovely fellow man have a conversation with a mechanical 2 wheeled machine*
*How unique*
Chops has gone all American "Zip ties"
New exhaust and the pegs look great.
Lovin Mavises hair do, show her who’s boss make her keep it . I think the word you was searching for Chop’s is butterflies lol keep em coming bud there keeps us saline 💪👍👍👍
That new rear tail looks great 👍.
Thanks Chris 👍
@@LambChopRides Yes, but will it fail MOT 'coz indicators are too close together?
Mavis ain’t having that hair! Her settings are now on full “Pisstake”! 😂
Love the video’s Chops
Glad you chose Vanasche. Their billet bling best in the industry. The Motobox rear tail tidy great.
Nice one Chops, looking good
Another top video, that tail tidy is awesome, very knight rider😎
Mavis got the right hump chops think the hair looks great myself Bike really getting there now looking trick 🤩
Getting there nicely!!😍 love the footrests in the new color 👍👍
Thanks Dennis, came out great didn't they 👍
Just got my footoeg hangers back from A1. Awesome finish! Fitting the springs back on is a mega faff! Great idea with the cable ties!
Ah great stuff Jason 👍
Excellent video, as always. Cannot wait to see how it with the new exhaust.
Great work as always chops
Good tip on the foot peg springs, struggled with so many of those 🤦🏻♂️, many thanks 👍.
Yes me too! Remember seeing someone mentioning zipties so thought I would try it 👍
Looking good,love the footpeg tip👌
I’ll be getting tekmo since chop says it good
The bike is coming along nicely Chops 🙂👍
That rear light looks awesome, and nice to see you use cable ties when slipping in your tip! :D
Haha thanks Peter 👍👍
@@LambChopRides :D
Brilliant video again Chopsie thanks again. Am starting to think my 701 needs to get err “chopped in” for a 690 now you showed us all these extra parts available😳
Yeah certainly seems to be more parts coming out for the 690 than 701 atm..
As they're 95% the same bike don't 690 parts fit?
Yes most do, headlight and tailtidy are different though, but yes 90% interchangeable
Great vid as always Mr chops
Your h2 😍😍😍
Can't wait to get me one of those
All the best to you 👍👍
Loving the rear light
Tail tidy looks great. 👍🏻 love the cerakoted parts!
Thanks Dave 👍
👌
Excellent! Been missing the next instalment. What a weapon this machine is going to be, love that billet fuel filler. Don’t worry about Mavis, just run a bath, light some candles and she’ll be fine again. 👍
Haha thanks HR 👍
Another entertaining & interesting vid. That 690 will be a real show stopper when you finish. You won't want to ride it & get it mucky lol. Actually I bet you can't wait to ride it!
Thanks matey, yeah I'm itching to try it! 😎😎
I fitted a pair of KTM rotating footpegs ~ they’re pretty good when wearing MX style boots, no missed gears... looked sharp too. I can’t remember if they were Ti too.
Morning LCR brilliant video as always! We love your top tips! Stay away from the back of the bike! People will start talking!
Haha thanks matey 👍
Hi chops, I'm moving to gosport in the spring so I might see you on the road
Looking good Chops 👌🏽 But that H2 is next level 😍😍
Yes it's incredible isn't it, do love it 👍
Can't wait for the dyno!!
Great video! That integrated tail light looks brilliant. 👍
So loving this build series, interesting and so funny, mavis is the real star … shove it 😂😂😂
That tail tidy looks awesome. However, I'm not a big fan of tail lights with integrated indicators on cars as they're often very hard to see when the vehicle is braking. You're ones are even smaller and probably even more difficult. Just make sure you use the highway code sequence of mirror, signal, manoeuvre (brake) to give those following the best chance of recognising your intentions.
Yes good point Steve 👍
I can not find the tail light on SMFs webside? Love your bike🤟
I must try your tip for getting it in the bottom hole 😁👍
A bit of paint protection film under the spring would have been easier 🤔 So funny Choppsy, great vid.
It's looking good.
Thanks mate 👍
Great series chopsie, makes me think about swapping my 500exc six days in for an smcr Moto. Will wait until the end of the series before I decide. 👍🏻
I love that there's so many great parts available for the 690 these days. 500 exc are great but for me SMCR offers that extra practicality without that much hoonage compromise
The best tail tidy on the 690 is the stock one with the led tail light mod
Love it chop's 😎👍
Just fitted two peg springs today a bitch, then I watch the video 🤯 heart tip & video as always 👌👍
What you need to do with the footrest springs is put a lolly stick in the carrier as you push the spring and pin through, then remove the lolly stick 😊👍
Yeah that could work! 👍
i knew there would be a tekmo dance clip in there lmaooo i like that tail tidy i ended up going with the setup crashking did on his 690 with the drc tail light and instead of getting the r&g bracket i got a cheap chinese one from ebay and it is actually great quality was very surprised lol
Great again video chops thanks from danny
Appreciate your tech videos even though I have the 690R but always interesting to see what you are up to.Cheers
Thanks Bruce 👍
Butterfly's was the word you were look for chops 😁
Ah yes thanks 😊
Great tip
Looking sexy chops, the bike obviously 👍
Haha you don't mean the bike do you.. Mavis 🤣
Is this integrated tail light still available I don’t see it on their website? I have a 2017 ktm 690R
Great I've just pulled the trigger on a grey and red 21 plate 690 which is leaving me skint forever now I need to buy a house so I can remortgage it for all these goodies!
What would Mavis advise....
What did you use as a plate light.
Love your videos!! where can I get the tail light? is it out of production?
Hello, I'm looking for the rear light from supermofools but they no longer make it, do you have any idea where I can find it? Sincerely
Looking good Chops.
I fitted an Oberon clutch cylinder to my Aprilia Dorsoduro, made no difference to feel/performance of the clutch, but........
worth it for the peace of mind of knowing you'll not have any future issues for some time.
Grumps.
They do fail on the 690 and 701, I know of one person who's failed and many people have commented there's have gone. They don't make a big difference to clutch feel on the 690 as there is no room to make them bigger. But they are just better quality
@@LambChopRides yep, my mates 701 failed within about 6k?!
He used Oberon too.
Cheered me up Chops...
chops what have you done mirror wise wanted the one bar end but can't fit it with the handguards apparently have u got the wind protection but not connected to bar end?? cheers
Really enjoy the rebuilds, just shows what can be done and let's face it... if you can do it.. anyone can🤔😂😜
Oh by the way, what do you do with the original parts? If your anything like me you'll have a garage and shed full..
Oh yes keep them all! Can't get rid of srock stuff 👍
I was waiting for the "Tekmo, Tekmo!!". 😄
At the end, you know I can't resist 🤣
Hi Do you find the key cover a bit of a loose affair that will rub paint of your top tubes eventually chops,or do I have unfortunately got a defective item obviously very rare from mototek
That's a nice tip!
Hey, I can not find the supermofools back lights, does somebody have a link to where I can buy it.
Awesome that you got the Tekmo silencer, lucky bastard, remember you said it was pricey, hope it's worth it as I may end up having to pay full price for it if it is
Yes indeed well happy! Quality is lovely, can't wait to hear it!
@@LambChopRides You keep making the vids and we'll keep watching dude. Got my team LCR hoodie and tee on the way, thanks for the weekly sanity reset buttons chops 👊🏻👊🏻👊🏻👊🏻
Top man thanks James 👍
Have to admit chopsy I’m only here for the Mavis show now lol 🤣🤣
Been reading up on the 690 smcr. There is mention of shift and tractioncontrole problems. Have you experienced any of this?
Look forward to the video on the blow off vavle on your H2
Have you removes the pair system on your H2 🤔 be interest to see it removed completely the pipes etc there alot going on under a H2 around there
No it's not been removed, was blanked for mapping but enjoy the pops and bangs too much to remove it
There is a prescribed distance between the rear indicators if you want the bike to pass an MOT I do not think the ones you have fitted will comply - too narrow
There is Todd, might have to change it back to stock for mot but that is 2 years away and 30 minutes to do so not all bad.
Looking good. Here's some trivia Chops. KTM: Kraftfahrzeuge Trunkenpolz Mattighofen, ze Germans!
They're Austrian
@@naranjalorange8584 yea but 'ze Austrians' tho
For your H2 with the recirculation valve you might get onto boost quicker vs an atmospheric valve it will have to rebuild all the boost it lost from going off throttle.
They say it makes it smoother.. I suspect any difference is tiny anyway but keen to see 😁
Where you buy the gear shift?
So where can I find the tail light been looking on the websites but can find it much help appreciated
Look at the link in the video description 👍
They must not sale it any more can’t find it on there website
Anyone know how i can get that light here in usa
looks sweet chops.... :-)
Will be any track video with the SMR?.
Yes probably, already seen the one I've done last year yes?
@@LambChopRides I did, looking forward for the next one 👍🏼
Coming on really nicely Chops. Can't wait to see the finished product. How long do you see yourself keeping it??
No plans to sell this one think its a keeper!
Nice tail tidy, won't pass MOT, indicators have to be 15" apart, so you could get a pull for that, Is there not something about E ratings on light reflectors?. I could be wrong just pointing it out, anybody know better let me know as I do like the combined light unit
I think yes your right but I've seen bikes with similar setups pass MOT. Need to take it somewhere with some common sense, worse case I will swap it back to stock for mot. 30 minute job
@@LambChopRides I have seen a few bikes fitted with them & I do have the same light strip I got from China,(not fitted) I just don't like giving a smart arse copper the opportunity to give me a pull & then talk down to me.
@@straitjacket7969 Just be sensible and polite and remember that you're the one in the wrong with illegal lights fitted. It's mostly about attitude.
@@naranjalorange8584 True, just basically grovel, the price of having super cool tail tidy.
Did they stop making this tail tidy?
Just bought myself a 2020 SMCR after watching your videos! Gets delivered in 2 weeks and I’m already looking at aftermarket parts! Do you still have the arrow end can? What sounds best?
Blingy bling bling
HI, can't find link to the tail, can you send me ?
I dont think theyre selling it anymore. Correct me if I'm wrong
Hi could anyone tell me if this will fit on a 2020 Husqvarna 701?
No it won't but been told 701 version coming soon 👍
Is the Tail Tidy street legal in germany? Looks pretty dope!
I knew you we're a drug dealer. 690 to make deliveries and H2 to pick up shipments. Makes perfect sense 👌 🤣🤣
Haha 😄
Looks good . Any News on the upcoming rides ?
Trident next week, but nothing else until after lockdown 😒
Is Mavis a descendant of Orac from Blake 7?
Distant cousin I think hehe
This bike is absolutely gorgeous! Did you need any LED resistors for the tail tidy?
Nope that's just plug and play! Flash rate seems perfect to me 👍
@@LambChopRides Thats awesome! Ordered mine, thanks for the inspiration!
Hi chops looking at getting the new supermofools head light with hi an low beam. Does the import duty an tax add much more to the total price?
I've avoided any import from Europe so far.. would be 20% VAT plus a tenner handling charge if they pick it up.. didn't on my bits 👍
I believe you now have to pay 20% import tax on top from what I heard the other day but I could be wrong...
Thanks for the replies much appreciated
I've heard the H2 brake issue you mentioned is actually the ABS unit. The bike comes with decent Brembo calipers and imagine the pads it came with are pretty decent?
Yeah could be the case I hope not.. pads are Brembo but getting something with more bit which will hopefully improve it.. fingers crossed 🤞
@@LambChopRides Cheap enough thing to try anyway. Brembo just released a new SR compound that would be worth a look
When are doing the Ducati
What is Mavis, did you make it yourself, she/it is hilarious though.👍👍🇬🇧
mavis roasted the h2
Chopsie, I’ve been looking for Sara Coating in the yellow pages. Is she listed under “paint shops”? It might vary between the UK and the US.
Cerekote is the name of it, you should be able to find it. Think it's produced by a US company so must be available 👍
If you go to Cerakote.com and in the menu look for “find an applicator” it will show you businesses in your area that are able to apply it. I think it was originally developed as a coating for firearms but has now been adopted by many other industries.
Pop some Lippy and tie her hair in Pony Tails, Mavis will love it lol
I love that tail tidy, and typically they don't seem to list that part any longer FML........
sexy rear end 👍🏻
Chops. Love the integrated tail tidy, 2 questions. Does it include a number plate light? Do they do it for the Husky 701 Supermoto? Great video, looking forward to the next one 🤩🤩🤩
We are working on a 701 version as well!
No numberplate light but there is a hole for one. Easy to add 👍
@@Supermofools any 701 version yet ? Really want this for my bike
Did you order your Gen3 busa yet?
Haha no but kinda interested to try it.. H2SX alternative maybe..
@@LambChopRides BTW, are you happy with your Rottweiler add ons? I have a 2010 690 SMC and getting the itch to move away from some of the stock bits...
Yes very but not riden the bike yet of course. Sure its going to be incredible!
I have a couple of questions 1st how much weight have you reduced from the bike and 2nd just how much longer will the lockdown be in effect ? The bike is coming together nicely
Weight question is a good one, I honestly don't know yet as have weighed stock stuff and not the new parts so results are skewed atm. Also planning a competition to guess the total loss 😁 lockdown is in effect until March I think currently..
Some weight coming off that bike. Hope yr not putting on double in lockdown 😮😛
Haha that's the trouble 🤣
Loving this video series! I was between the 690/701 SM and the 690/701 Enduro, but ended up going with a 701 Enduro for a bit more off-road ability. Picking it up today! But I still get lots of ideas for fun bits to put on from your videos. Who knows, I might have to do an SM conversion for when I'm feeling spicy! BTW, do you know if the tail tidy fits a 701 Enduro?
Thanks Den! Yeah not sure it will fit as tail is flat accross on the 701 and light is curved.. it might but doubt it
Oooo I like the fuel filter 😍
Did you get spanked by customs for import duty ?
No managed to avoid import on fuel filler and tailtidy and headlight! Got caught for the exhaust. Seems if value is around £100 you might get away with it
@@LambChopRides not with my luck lol
Thanks for the reply