The audio makes all the difference. Time permitting it would be great if you added the audio to some if not all your earlier videos. This is so helpful! I greatly appreciate your time and effort.
Many thanks for these great tutorials. What's your advice when learning a rhino or grasshopper? I've been trying to learn for a while, it's like I'm still at the point where I started.
Thanks for the content. I had a question at 2:20. How do you extrude a planar curve inwards with gumball? When I try to do it, it will just shrink the curve unless one of the control points is not on C-plane.
Hello, this is an architecture student who is enjoying watching your helpful videos. I just wanted to ask if it was possible if you have the time to do so, to make a tutorial on making the Harbin Opera House? I originally used another program for designing, and although Rhino is very nice program, I thought it would be a great opportunity to create the same architecture to pick out the difference between the two programs. I'm sorry if it is a bit of a big favor.. Thank you for the great videos however!
Can you please tell how did you make that manual model (at 12:30 ) please let me know what material did u use it. Will be very helpful for my thesis model making please let me know .
Hello, good morning, I am having a problem when copying the curve with shift, alt, ctrl, converting it into a surface and a united copy as you show, I hope to receive your help, thank you.
I'm sorry but for me after the control point curve, and when you ask to perform the keyboard commands, the same thing doesn't appear... it doesn't duplicate.... so I replayed the video several times to see if there's anything I missed and it ended up going nowhere.... like it doesn't make much sense to me lol... is there any tip or command that replaces what I think most are in doubt here so we can move on? I wait !!!
Hi if you can't use the shortcut. First extrude upwards, then shrink inward proportionally with shift. Finally, select the object and reset it in the z direction with setpt.
There is very little content like this on UA-cam. Therefore, I invite everyone to like these valuable works. 👍
The audio makes all the difference. Time permitting it would be great if you added the audio to some if not all your earlier videos. This is so helpful! I greatly appreciate your time and effort.
Thank you so much. Your support always motivates me.
Man, it's really an excellent job. I congratulate you on this.
There are no words to say. Seriously. Hands down. The work is very beautiful ❤️❤️❤️
Thank you. Very good comment.
Many thanks bro. The voice instructions made it even easier
Thank you Salam.
Çok iyi demekten başka bir şey diyemiyorum. Çok profesyonel bir iş yapıyorsunuz. Bu kanal sayesinde rhinoya kanım ısındı. Teşekkürler ❤️❤️
Teşekkürler, bunu duymak güzel.
Many thanks for these great tutorials. What's your advice when learning a rhino or grasshopper? I've been trying to learn for a while, it's like I'm still at the point where I started.
Instead of learning direct commands, try to learn by doing projects.
Great job 👏
Thanks for the content. I had a question at 2:20. How do you extrude a planar curve inwards with gumball? When I try to do it, it will just shrink the curve unless one of the control points is not on C-plane.
Same thing is happening to me
Thanks. Hold these three keys (Shift, Ctrl, Alt) and drag while holding the mouse.
Firstly, hold on the red square and then press on three keyboard's buttons
@@AdamArchhI cannot find the equivalent shortcut for Mac. I tried googling or searching in the help but I can’t find it.
Hello, this is an architecture student who is enjoying watching your helpful videos. I just wanted to ask if it was possible if you have the time to do so, to make a tutorial on making the Harbin Opera House?
I originally used another program for designing, and although Rhino is very nice program, I thought it would be a great opportunity to create the same architecture to pick out the difference between the two programs.
I'm sorry if it is a bit of a big favor..
Thank you for the great videos however!
Hello, thank you, I take into account the suggestions of all followers. I'll check out the Harbin Opera House.
I'm really appreciate you, thanks to share this video to learn Rhino. 😄
My pleasure 😊
Hi ! Just wondering how was the physical model done ?
Can you please tell how did you make that manual model (at 12:30 ) please let me know what material did u use it. Will be very helpful for my thesis model making please let me know .
Hello, good morning, I am having a problem when copying the curve with shift, alt, ctrl, converting it into a surface and a united copy as you show, I hope to receive your help, thank you.
Thank you so much for this video
Thank you too for support
😊
when i loop the center part and align, it fails to make into a circle. do you know why this could be. do you know how to change it ?
I'm sorry but for me after the control point curve, and when you ask to perform the keyboard commands, the same thing doesn't appear... it doesn't duplicate.... so I replayed the video several times to see if there's anything I missed and it ended up going nowhere.... like it doesn't make much sense to me lol... is there any tip or command that replaces what I think most are in doubt here so we can move on? I wait !!!
Hi if you can't use the shortcut. First extrude upwards, then shrink inward proportionally with shift. Finally, select the object and reset it in the z direction with setpt.
Hi Adam, amazing
Hi Rui, Thank you
Shift alt ctrl yaparken curvedeki vertices leri de yuzey olarak goruyor ve curve bozuluyor.Nasıl düzeltebilirim
Biraz daha detaya ihtiyacım var. Böyle bir durumu daha önce yaşamadım. Süreyi de yazar mısınız? Örnek: 00:50
when creating the external walls I'm unable to split walls by roof how can I do it ?
Can y add the information about the project in a comment
I shared in description. Project architect: Paul Le Querneq
Hi I’m struggling to isolate the object to align. When I make the surface, I cannot click the interior shape.
2:59 “hold control shift for loop selection “
Hi. I don't fully understand you, but I hope someone who understands will answer.
Please, i don't find the link to download files.
Members can downoad 3D files
link doesnt work please
how did you save the image from their website?
For Windows ''Snipping Tools''
when i move the center of the srf like u my srf crashes idk why can u help me plz
Hi. Can you send us an image or video from Instagram?
@@AdamArchh yes thanks
Hi. Can I know the solution to fix? I have the same problem.
@@karenngiam3096 hi you should select the crv and type subd friendly
كيف يكون شكل منحنى الحلقة محدودا لأنه لم يتم التحكم فيه معي على الإطلاق🤕💔
جرب المزيد وستنجح
قمت بتجربته واعدته اكثر من مره ولم يضبط معي 💔وانا طالبه وفكرة مشروعي قريبه من هذه الفكره وهوا حلي الوحيد لاخراج تصميمي