CPM 15V Returns: Para 3 Lightweight

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 177

  • @bboyshr6
    @bboyshr6 15 годин тому +1

    Thank you so much Shawn for making sure it’s true to your recipe. Grateful we are getting a custom heat treat in production prices. Just ordered mine today.

  • @benjamins7799
    @benjamins7799 2 дні тому +6

    The efficiency of this video was so satisfying. So much information and no fluff.

    • @FearNoSteel
      @FearNoSteel  2 дні тому +1

      Nailed it, thank you

    • @jimmycricket7946
      @jimmycricket7946 День тому

      ​@@FearNoSteelcongratulations you deserve alote of credit this was only possible because of your unwavering passion for innovation and perfection. I know you have many favorites but I need to know which steel has had the greatest impact on you and which is your all time favorite if you only had one to stick in your pocket?

  • @jesseadams45
    @jesseadams45 3 дні тому +10

    I've been here a long time, and you have really stepped up your videos. Very polished. Congrats on all your success in the last couple of years.

    • @FearNoSteel
      @FearNoSteel  3 дні тому +5

      We've come a long way haven't we? Thank you.

  • @HaveAKnifeLife
    @HaveAKnifeLife 3 дні тому +10

    I got your 15v shaman & pm2. Just ordered the para 3 15v lightweight, can't wait! The 15v has amazing performance! The egde just never gets dull.

    • @FearNoSteel
      @FearNoSteel  3 дні тому +2

      That's awesome! Thank you for sharing that.

  • @seff2318
    @seff2318 2 дні тому +2

    This is by far my favorite model from Spyderco. I have the extreme pleasure of owning something made with your expertise, finally. It's been a long time coming. The pricing and choice of materials is chefs kiss. Congratulations on your success Shawn! You’re my hero! Warmest regards, Seth

    • @FearNoSteel
      @FearNoSteel  День тому +2

      Thanks Seth! Yeah, this one is secretly my favorite, I'm not all that geeked out on the handle scale stuff and bearings etc.

    • @seff2318
      @seff2318 День тому

      @@FearNoSteel Agreed! The lightweight is heavily slept on. It just disappears in the pocket. I’m going to be really proud to own this one. I brag on you all the time. You’re literally the person that inspired my sharpening career and helped me have the knowledge to be so successful. This knife means so much more than a BBB 15v sprint run. Which is incredible on its own. You stand for something really important in the knife community. Seems you lead the horse to water and it drank!

    • @FearNoSteel
      @FearNoSteel  День тому +1

      @seff2318 Incredible, thank you Seth 🙏

  • @cavtj1
    @cavtj1 3 дні тому +2

    Just ordered mine the other day! Finally got a BBB 15V knife and the HRC is impressive. I have a few different flavors of the LW Para 3. Glad you put your influence in this one! Thanks!

    • @FearNoSteel
      @FearNoSteel  2 дні тому +1

      Well I greatly appreciate the support, thank you. 🙏

  • @nandayane
    @nandayane 3 дні тому +3

    I just ordered mine! Thank you for making these happen!

    • @FearNoSteel
      @FearNoSteel  2 дні тому +1

      Thank you! 🙏 That's a lotta performance under $200.

    • @nandayane
      @nandayane 2 дні тому

      @@FearNoSteel I’ve been here since the beer live stream days, It’s wonderful to get some of your handiwork in hand. My sincerest congratulations on making all this happen, I know it hasn’t been an easy road but we are grateful for your drive for perfection.

  • @kenjiwashere
    @kenjiwashere 3 дні тому +5

    This has a bit of "friendship ended with Manix 2 now Para 3 LW is my best friend" vibes lol
    Congrats on the successful continuation of this collab, very excited to get mine!

    • @FearNoSteel
      @FearNoSteel  3 дні тому +2

      Just plain cold blooded lol. Yeah, I'm digging this Para 3 lightweight, It's a whole vibe.

  • @dk210913
    @dk210913 3 дні тому +1

    Thanks so much, Shawn! Always love and support your work! Looking forward to the order I just placed 👍

    • @FearNoSteel
      @FearNoSteel  3 дні тому +2

      I greatly appreciate that. I would have never gotten here without support like yours.

  • @FilipeFaria080
    @FilipeFaria080 3 дні тому +1

    Great steel for sure! Have a PM2 in 15v. Miss your reviews my friend! Merry Christmas and Happy New Year!

    • @FearNoSteel
      @FearNoSteel  2 дні тому +1

      Merry Christmas 🎄🎁
      Thanks for the love.

  • @westondavis9626
    @westondavis9626 3 дні тому +4

    Awesome. Can’t wait for the G10 models.

    • @FearNoSteel
      @FearNoSteel  3 дні тому

      It's a killer line up in reveal 16 👌

  • @sharqzilla
    @sharqzilla 3 дні тому +3

    Picked one of these up, cheers from Guam!

  • @geredgriego5413
    @geredgriego5413 3 дні тому +14

    Holy sheet. They are in stock everywhere. Everyone and their little brother is still gonna complain sprint runs are unfair and wa, wa, wa. Thanks for this steel BBB. All I've carried for the past year is 15v

    • @FearNoSteel
      @FearNoSteel  3 дні тому +6

      My man, hell yeah. That makes me happy to hear the 15V was hogging all that pocket time. What are some of your thoughts about the performance?

    • @Btree33
      @Btree33 3 дні тому +2

      Horrible corrosion resistance and toughness. 10v is miles better

    • @FearNoSteel
      @FearNoSteel  3 дні тому +2

      @@Btree33 womp womp

    • @catchofthedave8681
      @catchofthedave8681 2 дні тому +1

      @@FearNoSteel yeah I am a massive 10v fan too……. My fav steels are 10v/k390 followed up by rex 45…… gpknives just released that amazing rex 45 smock and i was able to grab one. I just dont like the way the smock carries or feels in hand. The para 3 feels perfect to me. I just ordered the bbb 15v para 3 lw cuz i love everything you do with these steels. For pure cutting ability my para 3 maxamet has been my king. But, it gets lil rust spots i gotta keep it clean and oiled. Finally its starting to patina some so i wont have to worry about rust as bad. But i know its brittle, i know i will never use that knife to turn a screw head, or pry a small rivet. And from what I understand, the 15v is much the same, we shall see.

    • @FearNoSteel
      @FearNoSteel  2 дні тому +4

      @catchofthedave8681 nah, there's just a lot of grumpy haters. The 15v absolutely will be tougher than Maxamet and Rex 121. I don't really see anybody complaining about the toughness of S90v and M390, yet these same folks that give these stainless steels a pass seem to always want to throw 15V under the bus which I think is funny.
      Also, I've noticed the biggest complaints come from people that haven't tried the 15V so I recommend trying it before listening to self proclaimed experts on reddit.

  • @loosieclocker
    @loosieclocker 2 дні тому +1

    Waiting for Yojimbo!!!!! You’re a genius with these heat treatments. Can’t wait to see what you come up with for the new Larrin steel

  • @EvilSSP
    @EvilSSP День тому

    Really loving this brown and stonewashed combo. I really need a Bodacious in this trim.

  • @Cid_1
    @Cid_1 3 дні тому

    I can't wait to pick one up. Been loving the 15V Shaman since I got it, was not able to pick up a Manix but gonna get the Para 3. Keep up the great work Shawn.

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      Well I'm very happy to hear that. I hope this one also lives up to the enjoyment the others have been giving you. I know I'm certainly excited to get one in my pocket after so long.

    • @Cid_1
      @Cid_1 3 дні тому +1

      @@FearNoSteel I'm 100% certain It will. 15V with your protocol has been an absolute joy, so getting a Para 3 (and hopefully a Yojimbo when available) will be exciting stuff. As the Shaman doesn't get as much use anymore, mostly because I'm testing other steel and knives. But a Para 3 lwt I can always have space to carry or have in the backpack.

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      @Cid_1 Thanks for the report.

    • @dylanemeraldgrey
      @dylanemeraldgrey 3 дні тому +1

      OK. A little Mr. Rogers' neighborhood vibe...I like it 😅
      Long time no see on the youtubes...
      Ordered mine yesterday. Did an HRC search and came up with nothing, so that was great to see. I missed out on the other releases and was glad when i got a KnifeCenter email that mentioned your Para 3. I had resisted buying another knife for months, but had to throw down for this one.
      Hope all is well,
      ✌🤙

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      @dylanemeraldgrey Thanks Neighbor

  • @ryanashby2459
    @ryanashby2459 День тому

    I have the black out version from a few years back, still one of my go to's to this day.

  • @exquisitenonsense3987
    @exquisitenonsense3987 2 дні тому

    Ordered! I have daily-carried the 15V PM2 for about a year and a half, opened tons of boxes, cut straps, etc., and it still cuts paper like a laser! Nothing I've had even comes close on edge-retention.

    • @FearNoSteel
      @FearNoSteel  2 дні тому +2

      That's what I'm talking about 💥

  • @glockgaston2922
    @glockgaston2922 3 дні тому

    Congrats brother on your collaboration with Spyderco and I wish you all the success and I can’t wait until the Military 2 in your 15v drops 🔥🤘🏼

    • @FearNoSteel
      @FearNoSteel  2 дні тому +1

      Thank you, I really appreciate it ☺️

  • @the_sharp_carpenter
    @the_sharp_carpenter 2 дні тому +1

    Love that 15v goodness, hope to pic one of these lightweights up. My manix has been my daily driver since I got it with the exception of formal occasions. Think we need a fancy slip joint in 15v for those special occasions.

    • @the_sharp_carpenter
      @the_sharp_carpenter 2 дні тому

      Ps you should start doing audio books so we can get that silky smooth voice for hours on end

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      Oooo

  • @matthewkuhl79
    @matthewkuhl79 3 дні тому

    Thanks for the heads-up! i've been waiting for this and just ordered one 😁

    • @FearNoSteel
      @FearNoSteel  2 дні тому +1

      It'll be a good one, thank you 🙏

  • @LuisGonzalez-gl4wc
    @LuisGonzalez-gl4wc 2 дні тому

    My friend and I ordered this one. Can’t wait to try it. Would like to see Spyderco also offer it in a Delica or Sage series in the future in that 15v steel.

    • @FearNoSteel
      @FearNoSteel  День тому +1

      I think the para 3 LW scratches the Delica itch for me.

  • @SlashGears
    @SlashGears 2 дні тому +1

    Looking forward for the Manix LW in 15V since I missed the G10 version.

  • @lionknives3
    @lionknives3 3 дні тому +3

    Shawn the Military would be amazing with that 15v!

    • @FearNoSteel
      @FearNoSteel  3 дні тому +2

      I'm really excited for that one

    • @Nudel-nc1cp
      @Nudel-nc1cp 3 дні тому +1

      Oh yes. I want that to happen aswell
      I never was a big fan of shaman, para 2, 3, native or delica. Military, police, caribbean or stretch 2 are the way to go.

  • @cintage
    @cintage 2 дні тому +1

    Got it on pre-order. Can’t wait to get it it.

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      The Para 3 Lightweight? It's available right now at Knife Center, No need to pre-order.

  • @soslan1812
    @soslan1812 2 дні тому

    The Para 2 in 15v came with the best factory edge of all my knives, and I got few. The closest 2nd was Buck 110 in magnacut. Thanks

  • @WhatsthePOINT_EDC
    @WhatsthePOINT_EDC День тому

    Let’s gooo! I can’t wait to test one!💪

  • @Huero87
    @Huero87 3 дні тому

    Shawn, I'm really curious to see the hrc of the PM2 in Rex76. The edge stability seems to be stellar. I was cutting through aluminum cans on the factory edge with no deformation.

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      Well the Rex 76 mules tested very hard. I have not tested the Rex 76 hardness on the PM2.

    • @Huero87
      @Huero87 2 дні тому

      @ yea I remember you said 69.3 I’m assuming the dlc would lower the hardness a tad?

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      @Huero87 not sure.

  • @dmarcellus
    @dmarcellus 3 дні тому +2

    Can we get a Delica Warncliff in 15V please? Thank you.

  • @juanvaldez6321
    @juanvaldez6321 21 годину тому +1

    I ordered one. But i need you to convince them do a sprint run in 15v for the smock! 😂

    • @FearNoSteel
      @FearNoSteel  21 годину тому +1

      Well so far all the 15V is made in Golden

    • @FearNoSteel
      @FearNoSteel  21 годину тому

      Thanks for the support 🙏

  • @Laurarium
    @Laurarium 3 дні тому +1

    Could you give a hint about the “special protocol”

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      Depends, have you tried a knife with it?

    • @Laurarium
      @Laurarium 2 дні тому

      @ No, I have not.
      I am just curious about what is special about the protocol.
      Thermal cycling? Double cryo? Higher Soak? Faster quench? Prequench? Preheat? High or low tempering?
      If would be really nice if you can give a hint, what makes the microstructure special/ different form standard HT?

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      @Laurarium I see.

    • @Laurarium
      @Laurarium 2 дні тому

      @@FearNoSteel If you don’t want to disclose the HT, it’s fine.
      But any hint or clue would be appreciated.
      I support transparency.

  • @NotDave_x
    @NotDave_x 2 дні тому

    I got mine for $136 from national knives. If the 15v here holds up as well as it has in the pm2 they did before, then that represents just an absolutely insane deal.

  • @jordanwright5289
    @jordanwright5289 2 дні тому

    Mine is on the way. Stoked I got in on this one this time around?!

    • @FearNoSteel
      @FearNoSteel  День тому

      Well done, welcome to the BBB family 😁

  • @colinkelley7807
    @colinkelley7807 День тому

    Been loving the 15V, BBB. Any insight on when the 15V military 2 will drop?

    • @FearNoSteel
      @FearNoSteel  День тому

      Glad to hear, thank you, I haven't heard an exact date, 2025?

  • @LuisGonzalez-gl4wc
    @LuisGonzalez-gl4wc 2 дні тому

    Also those stickers are pretty cool.

  • @jaimehernandez9579
    @jaimehernandez9579 2 дні тому

    What site would you recommend for titanium stonewash scales or OD green aluminum scales? Im still debating on which scales i want

    • @FearNoSteel
      @FearNoSteel  2 дні тому +1

      AWT scales for the lightweight

  • @stickyedge7113
    @stickyedge7113 2 дні тому

    Got one on the way. Can't remember being this exited for a knife in a long time. I'll throw on some magpul fde AWT scales and it'll be good to go

  • @gaberoo9099
    @gaberoo9099 3 дні тому

    Ordered one! Thanks! Will we be getting a Para 3 with the BBB heat treated AEB-L sometime in the future?

    • @FearNoSteel
      @FearNoSteel  2 дні тому +1

      Thank you, good question, not that I'm aware of.

    • @gaberoo9099
      @gaberoo9099 2 дні тому

      @@FearNoSteel Darn. Would love to see the full potential of AEB-L.

  • @samturner6455
    @samturner6455 20 годин тому

    We need it in the Sage 5.

  • @svn5994
    @svn5994 3 дні тому

    What's your thought on the closing of Crucible?

    • @FearNoSteel
      @FearNoSteel  2 дні тому +1

      It's a shame, Niagara Specialty Metals has been the real hero in making sure we don't lose the flow of our favorite steels. Looks like they may be purchased by Erasteel this February 2025. Maybe they will rise again like 2009? We'll see.

  • @davidjewell3932
    @davidjewell3932 2 дні тому

    Thanks for info, getting the Military 2 next, guessing same HRC 🤘🤩

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      Yup, That's the target range 🎯

  • @StoneHands25
    @StoneHands25 3 дні тому

    I'm going to try for a yojimbo 2, are they still doing a manix 2 light weight?

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      Manix LW? We'll wait and see what's in Reveal 17 to be sure.

  • @6mmFilms
    @6mmFilms 3 дні тому

    Speaking of returns, he's back!

  • @barkingspider2007
    @barkingspider2007 3 дні тому

    Just ordered mine! Thank you for the video. ( Would love to see the knife as a Manix 2 LW, just saying...)

  • @clavididk1236
    @clavididk1236 3 дні тому

    I ordered mine! Thanks BBB

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      I appreciate it. Thank you 🙏

    • @clavididk1236
      @clavididk1236 3 дні тому

      @FearNoSteel thank you for your excellent steel and heat treatment. I thought I'd never get a BBB knife lol they sold out almost everywhere. Used midway to get it. Also got the rex 45 smock on the way bday/Christmas gifts. Happy holidays Shawn 🙌

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      @clavididk1236 Sounds like it's going to be an amazing Christmas. Thank you for sharing with me. Yeah, that smock looks pretty badass. Good taste.

    • @clavididk1236
      @clavididk1236 3 дні тому +1

      @FearNoSteel hell yea 😎 hope your holiday rocks as much as mine!

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      Thank you 🙏

  • @jimmycricket7946
    @jimmycricket7946 День тому

    Anyone else having trouble getting to knife centers page to purchase the 15v pm3 lw? Seems like I can only get there by using the link shawn provided?

  • @Mike-mi3yw
    @Mike-mi3yw 18 годин тому

    Mmmm I’m def getting the Yojimbo 2 but the manix 2 lightweight whenever it comes will be a banger

  • @frankbennett3075
    @frankbennett3075 2 дні тому

    Shawn! I snagged a lightweight at KC and they still had more. Used points to get 50$ off. Not sure about the G10, didn’t check.

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      Dude, that's a killer discount with points. Thanks for the support 🙏

  • @billyspahr808
    @billyspahr808 2 дні тому

    I have unfortunately snoozed on this drop:/ been wanting some 15v to use and sharpen for awhile!

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      www.nationalknives.com/spyderco-para-3-sprint-run-knife-c223pbn15v-plain-edge-cpm-15v-blade-brown-frn/

    • @billyspahr808
      @billyspahr808 2 дні тому

      @ oh shit thanks for the link dude! Ordered one. Can’t wait to sharpen it and use it!

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      @billyspahr808 hell yeah

  • @georgelin8498
    @georgelin8498 3 дні тому +1

    Waiting for a g10 model.

    • @FearNoSteel
      @FearNoSteel  3 дні тому +2

      Yeah, that's going to be a badass. Have you looked at those applied weapon tech scales for the Para 3 Lightweight?

  • @jj9936
    @jj9936 3 дні тому

    I'm super excited about a para 3 in 15V!!! Do you know when the G10 version will be released? I can't wait

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      Yeah, nice hefty feel with the G10 version. I'm not sure when that's going to be released but I'm sure it is sometime soon? Maybe January? I do not know.

    • @jj9936
      @jj9936 3 дні тому +1

      @ yes I don't have much confidence in the fact that there is no steel liner on the right at the pivot level on the Lgwt version so I'm waiting for the g10 😄 Thanks for your answer Shawn 👌 Thanks for bringing this steel to the para 3

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      @jj9936 no worries 🤙

  • @A.J.Collins
    @A.J.Collins 3 дні тому

    I am so glad to see this new release. The chamfering on my Para 2 from the last drop is fantastic. It looks like it is also on the Para 3 you show, is that correct? I pre-ordered the Military 2 and am hoping that more Manix 2's will be in this series.

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      Thank you, yes, it should have more chamfering on the Para 3 models. Yes, looking forward to the Manix 2 LW.

  • @jonp9158
    @jonp9158 3 дні тому +1

    Got one on the way!

    • @FearNoSteel
      @FearNoSteel  3 дні тому +2

      My man, that's what I like to hear. Thank you.

  • @lawrencem5943
    @lawrencem5943 3 дні тому

    I scored one last night! I also have the Mule in 15V. This would be great in a Bradley, any knife really! Lol

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      Well, thanks for the support 💥

  • @DLT704
    @DLT704 2 дні тому +1

    Haha you got the only centered para 3 lw in existence

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      Not this time. There have been a few others on the Facebook group.

  • @kevinfitz3721
    @kevinfitz3721 3 дні тому

    Do you still have a design coming or was this your collab with spyderco?

    • @FearNoSteel
      @FearNoSteel  3 дні тому +5

      Yes, It's been over 5 years now. I told them I wanted it made in the USA so I hope you guys are patient. It would have been made sooner if it was made in Taiwan.

    • @kevinfitz3721
      @kevinfitz3721 3 дні тому

      @FearNoSteel super exciting and I think it will be worth it

    • @FearNoSteel
      @FearNoSteel  3 дні тому

      @@kevinfitz3721 Thank you for that

  • @tacticalcenter8658
    @tacticalcenter8658 3 дні тому +1

    Id rather have a delica. Backlock is better than compression lock.

  • @adoseofdrew
    @adoseofdrew 3 дні тому

    Ordered mine!

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      Thank You 🙏 personally, I'm really enjoying mine.

    • @adoseofdrew
      @adoseofdrew 2 дні тому

      @ the Shaman is great, but I don’t really carry it. I’m stoked for the lightweight! Get some real testing done! Thanks for bringing this to us knife folks! 👍🏼🙏🏼🖖🏻

  • @sloppyfinish
    @sloppyfinish 2 дні тому

    never seen a centered LW para 3

  • @paull7432
    @paull7432 День тому

    Yes ! The bear is back! 🇺🇸🫡

  • @jaranjaranski
    @jaranjaranski 3 дні тому +1

    jolly good

  • @brandensutton2324
    @brandensutton2324 2 дні тому

    🤘🤘🤘🤘🤘🇺🇲🇺🇲🇺🇲🇺🇲

  • @lindboknifeandtool
    @lindboknifeandtool 3 дні тому

    My manix is sealed under a crawlspace

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      Good thinking, there may come a day when soft steel takes over and we'll need a reference for Excalibur. 😁

  • @W5rr2nG
    @W5rr2nG 3 дні тому

    Too hard for me. No thanks.

    • @rj_ofb
      @rj_ofb 3 дні тому

      Thats what she said.... (or not) 😂

    • @FearNoSteel
      @FearNoSteel  2 дні тому

      Lmao

  • @DuhYaThink
    @DuhYaThink 3 дні тому +1

    The “Bear” essentials 🫡 see what you did there. Love your content BBB.

    • @FearNoSteel
      @FearNoSteel  2 дні тому +1

      Ya got me, caught bear handed.

  • @merlingeikie
    @merlingeikie 3 дні тому +2

    Up there on the HRC means fantastic edge retention, but how brittle? How snappable? How much bend before deformation.
    Everything's a trade-off and what have you traded off to get a Rockwell that few will ever use or resharpen?
    Just being a devil's advocate
    ❤️🇦🇺🪃🌏🧬🇮🇱🥷🏹🙏✅️

    • @FearNoSteel
      @FearNoSteel  3 дні тому +1

      Well, HRC doesn't tell the full story. The microstructure making up that HRC is very important. Luckily, CPM 15V is no longer a mystery, It's been doing very well since 2022. Thank you for sharing and watching.