They need to make the toe boxes wider so that it doesn’t damage your toes after wearing heels for years and more padding in the foot bed and heel area , one siz e does not fit all
We are at: Andre # 1 Custom Made Shoes 2447 N. Orchard Drive Burbank, Ca 91504 (323) 876-5565 You can mail Repairs to us or schedule an appointment to see us. Thanks Gary
Hello and thank you for watching. If you were to trim off from the tip, the heel will cave in and it won’t be vertical anymore which is dangerous. You can twist or even break your ankle. If you notice in the video we start off with a Tall straight heel and at the end we have a short straight heel. That was the point. 🙏
It would be nice to have sound and explanations. I wouldn’t try this but I would like to be able to show my local shoe cobbler who says it cannot be done without affecting the heel to toe ratio affecting the walk.
Hello It’s not hard to do but you just have to know the anatomy of shoes. A lot of shoe repair shops don’t attempt stuff like this because they never made a shoe from scratch. Just show him my videos and he can follow. I average about 10 pairs of heel shortening a month. I’m not that good at editing videos, but I do plan to hire a video editor once I get 100 Subscribers. So if you can share videos and let people know that would be great 👍. Thanks 🙏
The shorter heel DID throw the balance (aka toe spring)of the shoe off. Notice how the toe sat flush to table before and is point up in the air afterwards.. I bet they are less comfortable to walk in ... the guy is very talented, but just because you can do something, doesn’t mean you should, and those beautiful shoes were designed to have 4 1/2 “ heels...
I just received a pair today for which I would like the heel shortened one inch....really cute stilettos. If I were only walking on carpet everywhere, then they'd be okay; but, walking on slippery wood, acrylic or linoleum is problematic. I was going to send them back; but, I'd rather try to have the heel shortened. If not, I'll just wear them only wear there's carpeting.
Hello, no problem, it normally takes 4-6 weeks to complete this process fully and costs about $300-$400 per pair to do. If you would like the process done please look in the "About" section on our channel for our address. Thank you!
Maybe the owner really love these particular pair of shoes but they are not available in the height the owner feels comfortable walking in? Maybe it was a gift with sentimental value and the owner would like to be able to proudly show them off in comfort? Maybe the owner is really tall and doesn't want the added height? There are many rational reasons for getting this done. Don't generalise and put people in boxes and it's not like they are spending your money to do this.
@@ish1918 I'm looking at reducing my heels because at one time I was able to walk in 5 in and higher now that I'm older I still like the style of the boot I just no longer can wear heels that high so I would like to maintain the boot and just lower the heel
Hello thank you for contacting us. We are located at 2445 North Orchard Dr. Burbank CA. However, it's best to text my number at 323-876-5565 to give you a quote for your shoes. Please send a picture of the shoes and what you want to be done before sending the shoes. Thank you!
Why ruin such a beautiful pair of shoes? Makes me sad. :( They just don't have the balance and form they were designed to have. Sell them and get some designed to have 3.5 inch heels.
They actually are balanced once worn. Your body weight equals out the rise in the toe. This is a clients request. We Average about 30 pairs of cutdown’s a year for her. ✌️
Do you know how to turn these into 5 inch stiletto heels? Just curious how I can get the materials and things to create my own. I want to create an minature pair of stiletto heels for my heel collection.
I have a Red pair of patent leather Manolo Blahnik heels that needs a reduction from 115 to 105 but scared the leather will get scratched during the process, is it possible to get this done with a flawless finish?
I have noticed that womens high heeled shoes don't have the same eye appeal they used to. It appears to me that they, "the powers that be" whoever they are have redesigned womens high heeled shoes with the heel all the way towards the back of the shoe and that the heel has lost that little curve to it, which to my eyes is what made the shoe more eye appealing and it allowed the ball of the womens foot to be located directly under the actual weight of her/the body of the wearer. This may sound absurd but a Psychologist in practice that I know personally said he is aware of this new fashion design and said they moved the womens high heel all the way to back or rear of the shoe in order to try and make high heel shoes as uncomfortable as possible to make the trend of high heeled womens shoes to "GO-AWAY". I HAVE NOTICED THAT WITH THE HEEL STRAIGHT UP AND DOWN ALL THE WAY TO THE REAR that women don't walk as smoothly as they did with the curved inward heel and again it just looks better to have the femine curve to it, after all it's the curves of a women that is what is eye appealing. Next time you are out take note....the straight and at the obsolute rear of the high heeled style shoe wearing women look like are being throwed forward where as the curved inward heel wearer looks and walks like she is in control without losing her balance.
Hello Yes, we are accepting work. We are normally at the shop five days a week but we’re scheduling by appointment only. You can also mail your items to us. Thanks Gary
You didn’t show how are you lord the shank and then applying to heal you didn’t show how to put on the Burberry fabric back onto the hill so you missed a lot of steps
He letter out a few important steps. Mainly, he didn't demonstrate how he took an inch off. Next, he didn't show us how he removed the cover from around the heel. Finally, he did the most! He could've just remove the tip from the shoe. Then, cut the shoe down to your desired height, leaving the metal insert sticking out. then use a soldering iron to heat the rod so you can take some grip pliers to twist out the metal rod. Then, use dreamer to cut off the small metal tube. Finally, use a hammer to drive the small metal tube back into the heel; then reinstall the tip back into the metal tube.
They need to make the toe boxes wider so that it doesn’t damage your toes after wearing heels for years and more padding in the foot bed and heel area , one siz e does not fit all
Beautiful shoe! I can't walk in heels to save my life. I would need a 2.5 inch🤣😩 You did a good job.
Thank you 🙏
@@Andre1CustomShoesWhere are you located?
We are at:
Andre # 1 Custom Made Shoes
2447 N. Orchard Drive
Burbank, Ca 91504
(323) 876-5565
You can mail Repairs to us or schedule an appointment to see us.
Thanks
Gary
Why not just trim the tip? I’m seriously asking and would like to know?
Hello and thank you for watching. If you were to trim off from the tip, the heel will cave in and it won’t be vertical anymore which is dangerous. You can twist or even break your ankle. If you notice in the video we start off with a Tall straight heel and at the end we have a short straight heel. That was the point. 🙏
When did he switch out for smaller heel❓
I chopped the heels down per customer’s request
It would be nice to have sound and explanations. I wouldn’t try this but I would like to be able to show my local shoe cobbler who says it cannot be done without affecting the heel to toe ratio affecting the walk.
Hello
It’s not hard to do but you just have to know the anatomy of shoes. A lot of shoe repair shops don’t attempt stuff like this because they never made a shoe from scratch. Just show him my videos and he can follow. I average about 10 pairs of heel shortening a month.
I’m not that good at editing videos, but I do plan to hire a video editor once I get 100 Subscribers. So if you can share videos and let people know that would be great 👍.
Thanks 🙏
The shorter heel DID throw the balance (aka toe spring)of the shoe off. Notice how the toe sat flush to table before and is point up in the air afterwards.. I bet they are less comfortable to walk in ... the guy is very talented, but just because you can do something, doesn’t mean you should, and those beautiful shoes were designed to have 4 1/2 “ heels...
I need this done to 3 pairs.
Yes yes yesss me...tooo..older age kicking my ass...all my bad ass heels are now way too high..im sick and tired of giving away expensive
shoes
@@supernova2897 try John Fluevog shoes, even the heels are super comfortable
I just received a pair today for which I would like the heel shortened one inch....really cute stilettos. If I were only walking on carpet everywhere, then they'd be okay; but, walking on slippery wood, acrylic or linoleum is problematic. I was going to send them back; but, I'd rather try to have the heel shortened. If not, I'll just wear them only wear there's carpeting.
Hello Tricia
We can definitely shorten the heels. We charge $400 for the process. And takes 2-3 months to do. Thanks
Gary
I need this done to a few shoes. That would be amazing!
Hello, no problem, it normally takes 4-6 weeks to complete this process fully and costs about $300-$400 per pair to do. If you would like the process done please look in the "About" section on our channel for our address. Thank you!
What's the point? - Why not just buy a pair of shes with a lower heel? - Some people have more money than brains.
Maybe the owner really love these particular pair of shoes but they are not available in the height the owner feels comfortable walking in? Maybe it was a gift with sentimental value and the owner would like to be able to proudly show them off in comfort? Maybe the owner is really tall and doesn't want the added height? There are many rational reasons for getting this done. Don't generalise and put people in boxes and it's not like they are spending your money to do this.
@@ish1918 I'm looking at reducing my heels because at one time I was able to walk in 5 in and higher now that I'm older I still like the style of the boot I just no longer can wear heels that high so I would like to maintain the boot and just lower the heel
What are you using to remove the inner layer?
Hello
We use Thinner
I thought he was a private shoe guy, he must work for Burberry
Where can you purchase the heel to change
Hello Delores,
I shortened the existing heel. Thanks
Can you make a 2 inches heels using a 3inches last for high heels?
Where are you? Can I send you my shoes please?
Hello thank you for contacting us. We are located at 2445 North Orchard Dr. Burbank CA. However, it's best to text my number at 323-876-5565 to give you a quote for your shoes. Please send a picture of the shoes and what you want to be done before sending the shoes. Thank you!
Why ruin such a beautiful pair of shoes? Makes me sad. :( They just don't have the balance and form they were designed to have. Sell them and get some designed to have 3.5 inch heels.
They actually are balanced once worn. Your body weight equals out the rise in the toe. This is a clients request. We Average about 30 pairs of cutdown’s a year for her. ✌️
Amazing 👏
Where are you located !
Hello
We are relocating to Burbank, Ca. The shop should be up and running in July.
Keep in touch.
Thanks
The front of the shoe now sticks up.
Hello
Yes that’s true, until you step into the shoe. Then your body weight brings it to normal.
Do you know how to turn these into 5 inch stiletto heels? Just curious how I can get the materials and things to create my own. I want to create an minature pair of stiletto heels for my heel collection.
Hello
I normally carve heels out of old shoe lasts either in PVC material or wood they’re both easy to maneuver.
What a jip.. didn’t even show us anything but removing heel. Made absolutely so sense?
Sorry Al
I didn’t mean to do that I accidentally deleted those parts of the videos. I’m trying to find a video editor.
I don’t think there’s anyone in my country who can do this
same here in my country
I have a Red pair of patent leather Manolo Blahnik heels that needs a reduction from 115 to 105 but scared the leather will get scratched during the process, is it possible to get this done with a flawless finish?
Hello, we always try to do clean work, but what you are saying is always a possibility.
आपने जो सैंडल के नीचे ऊंची एड़ी लगाईं है,वो कहां मिलती है। उसका ऑनलाइन खरीदने का लिंक भेजो।
Check in with me, start of the year I will post all the heels I have for sale.
I have noticed that womens high heeled shoes don't have the same eye appeal they used to. It appears to me that they, "the powers that be" whoever they are have redesigned womens high heeled shoes with the heel all the way towards the back of the shoe and that the heel has lost that little curve to it, which to my eyes is what made the shoe more eye appealing and it allowed the ball of the womens foot to be located directly under the actual weight of her/the body of the wearer. This may sound absurd but a Psychologist in practice that I know personally said he is aware of this new fashion design and said they moved the womens high heel all the way to back or rear of the shoe in order to try and make high heel shoes as uncomfortable as possible to make the trend of high heeled womens shoes to "GO-AWAY". I HAVE NOTICED THAT WITH THE HEEL STRAIGHT UP AND DOWN ALL THE WAY TO THE REAR that women don't walk as smoothly as they did with the curved inward heel and again it just looks better to have the femine curve to it, after all it's the curves of a women that is what is eye appealing. Next time you are out take note....the straight and at the obsolute rear of the high heeled style shoe wearing women look like are being throwed forward where as the curved inward heel wearer looks and walks like she is in control without losing her balance.
Women don’t want our weight on the ball of our feet. Makes the experience more excruciating.
Can this be done to suede shoes?
Hello. Yes it can definitely be done to suede shoes
Hello 👋
Are you currently accepting work?
Where are you located?
Could I mail my shoes to you?
Hello
Yes, we are accepting work. We are normally at the shop five days a week but we’re scheduling by appointment only. You can also mail your items to us. Thanks
Gary
You didn’t show how are you lord the shank and then applying to heal you didn’t show how to put on the Burberry fabric back onto the hill so you missed a lot of steps
Hello I’m really bad at video editing I think I accidentally deleted couple clips. Sorry
Am I missing where he’s cutting it down
Hello
Sorry I lost a couple of videos in between
This is great, they look exact the same except of course they lost one inch
Thank you for the respect and recognition 🙏
How much does cost ?
Hello. It costs $400 for the pair.
@@Andre1CustomShoes thank you
He letter out a few important steps. Mainly, he didn't demonstrate how he took an inch off. Next, he didn't show us how he removed the cover from around the heel. Finally, he did the most! He could've just remove the tip from the shoe. Then, cut the shoe down to your desired height, leaving the metal insert sticking out. then use a soldering iron to heat the rod so you can take some grip pliers to twist out the metal rod. Then, use dreamer to cut off the small metal tube. Finally, use a hammer to drive the small metal tube back into the heel; then reinstall the tip back into the metal tube.
Hello
Thanks for the comment. I’m not the best at making videos or editing them. But soon enough I will hire a professional. ✌️