I’ve had this bike since Christmas and the only issues I had was a new carburetor was a requirement, the exhaust broke off, and the wheels are trash. The tread on the rim of the tire was completely ripped and kept popping the tubes. But other than that it has good power, the front end pops up pretty easy without using the clutch, and the tires are bigger than a usual pit bike.i would definitely recommend getting this, just be prepared to spend around 40 bucks on a new carburator
love the videos on the dbx1 i have one and if you want more speed go with the 16'' rear wheel and 17 tooth sprockets you will get a smoother clutch up and high top speed i have a 17/35 sprocket set up and it get almost to 50 in 3rd
I bought mine from amazon and the only things I have done to my dbx1 are a replica mikuni,eBay muffler and I hand tightened my shock and that’s about it and for the money it’s a very good dirt bike for beginners
there is actually a fair bit of info and videos out there about the yx140cc engines and other yx engines, ive noticed yx engines are on pretty much all the pit bikes- tao, apollo, thumpstar, ssr, pitster pro, list goes on. all the pit bike manufacturers just put their logo on the yx engines. i had a 2009 pitster pro lxr160, man that thing was sick but it was toast so i sold it last year, im looking at getting a tao dbx1 or a apollo rxf open or free ride
I just bought one of these and I hear something rubbing like either the chain or bearing? How do I tell which? I can't really hear it hear it pushing it only when riding
I would get a Tao but I’m kind of scared if it’s going to fall apart within like a week or so and also for the oil does it have to be a specific oil? For the tao
Gavin Mcvey I normally do, I actually just put a whole different carb and a bigger cam in one of mine. I do have a mini set of drill bits though if you ever wanted to go up one size at a time without waiting on them
Yea its a good bike for that. Do some cheap mods and get it to perform better once you ride it more. It seems pretty popular now. I always recommend ssr brands. They have always held up great but the dbx1 is a good buy too.
Apollo rfz bikes are decent I've heard. I have an SSR 110 that's great and a thumpstar 125 if you haven't seen those. All have some issues but what bike doesn't ya know?
Tyson M im also trying to decide on a apollo rfz x18, another off brand bike, or just get a klx110L... have been doing alot of research and watching alot of videos and so far the rfz is winning my vote.
It would handle trails very well I think! As for miles on a tank I don't have an exact answer it is very good on gas is all I can tell u. Fill it up and ride for hours!
I googled 5 best pit bikes,, tao tao both of them came up 1 st for came in last dir syxmoto as in sick moto came in last 125 I like it don't know why it came in last,, not much on youtube about it but always go up to a 17 tooth front sprocket dude hit 60 on the one here the tao tao 140cc only thing that swing arm second time I seen problems with it a she's number 1 on the list
www.amazon.com/NIBBI-Performance-Motorcycle-Carburetor-KAWASAKI/dp/B07GC4B257/ref=sr_1_4?dchild=1&keywords=NIBBI+carb+26mm&qid=1590960876&sr=8-4#customerReviews That is the NIBBI carburetor for the Tao Tao DBX-1 I have one on mine. this is a video of my DBX-1 ua-cam.com/video/siQGnCrVy5g/v-deo.html
Sounds 👍 performance, seems like ALL bikes, ebikes, dirt bikes and motorcycles from China have the Round Inner Tube 🎈 🎈 in them and to go Tubeless would be impossible.
Thanks 4 the heart loved comment I did, also when the tires on these products are Wider, That's where I get the 💡 of rubber round 🎈 🎈, might be a little wild but, Rubber Tree grows in the Orient, they make various rubber products in the factories a lot more than anywhere else.
I just got one of these bad boys and it came with no instructions all though it was pretty eazy to install i have some wheel shaking issues on the back wheel im not sure whats going on pretty sure i have the spacers in the right spot you have any suggestions?
@@bearkreekboys Do you honestly say this thing can run w.o.t. on and off for about 8-10 hours? or more like 4-6? Looking for a real idea since the tank seems really small and really interested in picking up this bike soon but want to make sure it can ride for a few hours at least kinda hard on and off..Thanks!
@Jonathan Brea I sold it a while ago because I feel we got a lemon bike. Heard many others that the bike has been great! It's a good bike for a beginner and even your average experience rider. Has good power but just not out of the box. Do some cheap mods and you'll have nice bike. It has a 1 year engine warranty as well. We got a new engine sent to us when we had that issue we made a video on it. Hope that helps
Basically going in 2 or 3rd gear and revving the engine and letting the clutch out fast to pop the front end up instead of leaning back and power wheelieing. If that makes sense. The clutch was toast shortly after many of those clutch dumps were done.
If you search up "Dirt Bike Hand Guards" on Ebay or Amazon you should be able to find some exactly the same or pretty similar for around $15-$25. Sorry we don't have an exact link.
I'm very abusive on my bikes, do you think this bike could handle it. For example dropping it a few times or pulling the wheelie to far back and falling.
James Orend yeah it would be I’m 5,2 and I just had to lower it a bit but it would be perfect for your higher and you can make it higher by tightening it a bit
Gearing is pretty cheap it's just changing the sprocket on the front or the back you have to do some research to see what tooth sprocket you need to increase your top speed
If you don't want to stick a lot of mods and money into the bike then I would just get a name brand it's just want some in the bomb around on and have fun it's a great bike for that it's just not performance ready out of the box
@@bearkreekboys Stretch" is the wrong word to use.. because metal doesn't stretch But the pin holes that go through each link get worn out and elongate, and if you lay an old (abused) chain down flat you can see it will extend/compressed (aka 'stretch') quite a bit
Thanks for watching make sure to click the bell to be notified!!
Can i have the link to you nock off mikuni?
Ya same. Here
Is the bolt pattern the same as a honda
If you want a stiffer shock you can grab the spring and tighten it by hand
Great bike, perfect upgrades! Video tops 💯
I’ve had this bike since Christmas and the only issues I had was a new carburetor was a requirement, the exhaust broke off, and the wheels are trash. The tread on the rim of the tire was completely ripped and kept popping the tubes. But other than that it has good power, the front end pops up pretty easy without using the clutch, and the tires are bigger than a usual pit bike.i would definitely recommend getting this, just be prepared to spend around 40 bucks on a new carburator
Fax
So basically get aftermarket tires a carb and exhaust?
Got the bike looking and sounding good I got the same one they are fun as hell brapp 💯👍
Heck ya!
love the videos on the dbx1 i have one and if you want more speed go with the 16'' rear wheel and 17 tooth sprockets you will get a smoother clutch up and high top speed i have a 17/35 sprocket set up and it get almost to 50 in 3rd
Okay thanks for the tip! Appreciate the comment
MMO no problem bro here to help
Where do you get the 16 rear wheel if ya dont mind me askin
David Robisheaux sure no problem this the exact link X-PRO 90/100-16 16" Rear Wheel... www.amazon.com/dp/B07TFZS4RZ?ref=ppx_pop_mob_ap_share
Just finished watching the video they seem like they are nice bikes
"you're pooched, bud" best part
I have the same bike it was my first bike I love it
How much u pay
I bought mine from amazon and the only things I have done to my dbx1 are a replica mikuni,eBay muffler and I hand tightened my shock and that’s about it and for the money it’s a very good dirt bike for beginners
Definitely!
Not just beginners! Lol I got me one for a pit bike at the Mx races.
Noxus what muffler did you upgrade to?
FadeEmTP I got a universal eBay muffler and it was too big so I wrapped it with exhaust wrap to get rid of the gap
@@freedomisntfree_44 How has the bike been now that its a year later? Held up okay?
Would this be a good bike to cruise trails on
Clutch part # ? Need new soon !? I have one also, special tool for clutch basket?
there is actually a fair bit of info and videos out there about the yx140cc engines and other yx engines, ive noticed yx engines are on pretty much all the pit bikes- tao, apollo, thumpstar, ssr, pitster pro, list goes on. all the pit bike manufacturers just put their logo on the yx engines. i had a 2009 pitster pro lxr160, man that thing was sick but it was toast so i sold it last year, im looking at getting a tao dbx1 or a apollo rxf open or free ride
Yeah our dbx1 is junk
The bike in the video is junk? Why what happened
I'm about 5'6 is this a good size bike to start with?
It's a little tall for u out of the box might be able to adjust it lower but the guy in the video is 5'11
If your not planning to fully build your engine a nibbi carb is a bad choice your better off just getting the knock of makuni and just jetting it
I just bought one of these and I hear something rubbing like either the chain or bearing? How do I tell which? I can't really hear it hear it pushing it only when riding
Hey what size did you bought the new shock
I would get a Tao but I’m kind of scared if it’s going to fall apart within like a week or so and also for the oil does it have to be a specific oil?
For the tao
I would use oil that is recommended for motorcycles with a wet clutch system
What type of cover you put on muffler. Send link if you can
Drill the main jet, and the rear suspension is adjustable. Gonna actually test mine on a track see how well it holds up
Gavin Mcvey I normally do, I actually just put a whole different carb and a bigger cam in one of mine. I do have a mini set of drill bits though if you ever wanted to go up one size at a time without waiting on them
How does it keep up on trails?
@@supercooldude824 it’s ok just a little small for me, just recently sold it. For the most part was and still is solid
Well I was thinking about buying that one until I seen this video
Where do you buy better carburetor? Any good carburetor will fit as long as same cc?
I have one it’s not getting spark. Brand new wire harness, tried disconnecting kill switch. Still no spark any recommends?
You'll have to verify AC output signal from stator and cdi. I don't have any in depth videos on this yet, will maybe make one
Good budget bike for a begginer? Im 14 and looking into cheap begginer bikes. I wont run it too hard
Yea its a good bike for that. Do some cheap mods and get it to perform better once you ride it more. It seems pretty popular now. I always recommend ssr brands. They have always held up great but the dbx1 is a good buy too.
Wait whos 5'2 the guy riding the dirt bike or the guy holding the camera.
He's 5'11" that's on the bike
@@bearkreekboys thanks
Thanks for the info. Looking for a little 4 stroke and was considering this bike. See you guys are from WI, where from? Im in Kenosha, wi.
Sheboygan area
Thanks for the video, I'm really debating whether to get the tao tao dbx1 or the Apollo x18 or x19
Is that Apollo a 140 or 125??
Apollo rfz bikes are decent I've heard. I have an SSR 110 that's great and a thumpstar 125 if you haven't seen those. All have some issues but what bike doesn't ya know?
@@bearkreekboys the x18 and x19 are 125cc
Rfz Apollo would be okay I think idk much about the x18 or x19
Tyson M im also trying to decide on a apollo rfz x18, another off brand bike, or just get a klx110L... have been doing alot of research and watching alot of videos and so far the rfz is winning my vote.
In Canada they try to charge twice as much for these even with exchange.
How do you think the dbx1 would do on riding some lite trails? How many miles do you think you can get with a full tank?
It would handle trails very well I think! As for miles on a tank I don't have an exact answer it is very good on gas is all I can tell u. Fill it up and ride for hours!
Just out of the box it's not a peppy bike at all...just gotta run non ethanol fuel too for those cheap carbs to keep them clean!
@@bearkreekboysis 87 octane from the gas station ok
He's say "We" like it's his bike too lol. Did you go halfs on it or something?
@MMOwhat oil change do u reccomend for this bike
Any oil that is for wet clutch or Motorcycle specific
Synthetic oils i.use Valvoline or sportline motorcycle oil
I live in Wisconsin and I'm getting an Apollo DB-X18 125cc.
Let me know how that bike is! Where in Wisconsin r u at?
@@bearkreekboys Sheboygan.
Damn we r really close to that
I googled 5 best pit bikes,, tao tao both of them came up 1 st for came in last dir syxmoto as in sick moto came in last 125 I like it don't know why it came in last,, not much on youtube about it but always go up to a 17 tooth front sprocket dude hit 60 on the one here the tao tao 140cc only thing that swing arm second time I seen problems with it a she's number 1 on the list
What special socket do i need to change the clutch
Amazon it pit bike clutch socket!
Can I switch my fairings and swing arm and forks to 125cc on my 110cc trying to get it up a little higher
I'm not sure on that
@MMO can u pls leave me a link for a nibbi carb that will be good for the Taotao dbx1 don’t know which one to get?😂
www.amazon.com/NIBBI-Performance-Motorcycle-Carburetor-KAWASAKI/dp/B07GC4B257/ref=sr_1_4?dchild=1&keywords=NIBBI+carb+26mm&qid=1590960876&sr=8-4#customerReviews
That is the NIBBI carburetor for the Tao Tao DBX-1 I have one on mine.
this is a video of my DBX-1
ua-cam.com/video/siQGnCrVy5g/v-deo.html
Where did u buy the clutch ? I have the same motor
Amazon I believe it's for a yx140 it's around 40$
eBay may also have it
Sounds 👍 performance, seems like ALL bikes, ebikes, dirt bikes and motorcycles from China have the Round Inner Tube 🎈 🎈 in them and to go Tubeless would be impossible.
Thanks 4 the heart loved comment I did, also when the tires on these products are Wider, That's where I get the 💡 of rubber round 🎈 🎈, might be a little wild but, Rubber Tree grows in the Orient, they make various rubber products in the factories a lot more than anywhere else.
I just got one of these bad boys and it came with no instructions all though it was pretty eazy to install i have some wheel shaking issues on the back wheel im not sure whats going on pretty sure i have the spacers in the right spot you have any suggestions?
Make sure spokes r intact and yea the axle is tight and the spacers.
Oky thanks for the reply will try it when I get home from work today 💜
How did you get the muffler slip on to fit. I got the same one and it is to small
I had to enlarge the hole with a grinding tool Ihave another video on this exhaust about making the diameter bigger
Where can I get brakes for my dirt bike from.
Has he gotten the rear shock yet? If so is the bike less bouncy
We sold the bike 2 weeks ago though
@@bearkreekboys isnt the ssr too small for u guys?
No it actually is really nice specially for our track that we have and wheelies much easier to control Powers more consistent
How fast does it go
Like 60mph
Can you run tubeless?
Let the man talk sheesh he couldn't get a sentence out
How you think the bike would ride with a bigger rear tire
Little more speed I'm sure. I think guys had put bigger ones on have to check online forums and stuff
How long dose the dirt bike last with a full tank of the cheapest gas?
All day
@@bearkreekboys Do you honestly say this thing can run w.o.t. on and off for about 8-10 hours? or more like 4-6? Looking for a real idea since the tank seems really small and really interested in picking up this bike soon but want to make sure it can ride for a few hours at least kinda hard on and off..Thanks!
@@dorian345 it will run for a couple hours I would say not 8-10 hrs hard riding but 3-4 hours of moderate throttle and abuse!
@@bearkreekboys ok true thats not too bad..wish these tanks were a bit bigger though
Do you think I would fit on it alright being around 6 foot, btw I’m only about 150lbs
Yes!
@Jonathan Brea yea we had a 200 pound rider on it and it rode good
@Jonathan Brea I sold it a while ago because I feel we got a lemon bike. Heard many others that the bike has been great! It's a good bike for a beginner and even your average experience rider. Has good power but just not out of the box. Do some cheap mods and you'll have nice bike. It has a 1 year engine warranty as well. We got a new engine sent to us when we had that issue we made a video on it. Hope that helps
@Jonathan Brea klx 140 or crf150r maybe or SSR pit bikes r good like a 140 SSR is nice.
Does this have the 17" with 14" in the rear?
Yes
What size carb does it take and would a mikini wor
24 or 26 mm carburetor we use the knockoff mikuni
@@bearkreekboys so u think the real deal will fit bc it’s only a 100
What socket set yall get?
Please explain @ 7:25 clutch dump?? Thanks. Awesome review.
Basically going in 2 or 3rd gear and revving the engine and letting the clutch out fast to pop the front end up instead of leaning back and power wheelieing. If that makes sense. The clutch was toast shortly after many of those clutch dumps were done.
@@bearkreekboys Oh okay! I get it now. Thanks. For the reply! Keep up the good work. 💪🙏
@@bearkreekboys so if I just drive it normally without any wheelies it will be fine?
@@brycewatson3387 yes
So there decently reliable ? I’m 6”1 180 pounds will I fit?
Yup!
@@bearkreekboys I had a SSR189 Is this bike better? And why?
I bought the same pipe mine wont fit did you have to drill yours out?
I had a 38 mm which was too big the 28 mm you can try to drill out it's actually a 32 mm is the actual correct size
@@bearkreekboys i got a 28mm i seen another video where someone drilled out an fmf pipe to fit i guess ill try that thanks bro
can you drop a link where to purchased this bike from
I got it from superiorpowersports.com
whats the link of the handgrauds
Yikes it's been a while.ill see if I can find them
If you search up "Dirt Bike Hand Guards" on Ebay or Amazon you should be able to find some exactly the same or pretty similar for around $15-$25. Sorry we don't have an exact link.
where and what clutch did you get
Amazon it's a yx 140 clutch 5 plate I think
Do u happen to have the link to the slip on exhaust cover?
I can't get that yes
What size clutch did you buy?
It was on eBay or Amazon for a yx140 is the one u would need
You never said if one should buy this bike or not.
Would this be a good size for somebody who is 5 ft 3 inches?
It's a little tall for that height but might be okay maybe a 110 or 125 is better
Thnk you!
I'm 5'4 is this a good bike for a beginner?
I'm not the creater but I think it would.
The new ones are supposed to have a better carburetor
How long did the dbx1 last? Had mine about 4 months and it runs like a champ.
Motor had problems within 8 months
If you have to switch it right away it's garbage it just looks good
What higher end carb should i get ?
Nibbi?
26mm ?
@@CR-ym2tx what carb do u have now?
What kind of pipes on there?
38mm slip on ebay
Can you drop a comment with the link to the carb you got? Just got this bike and def in need of the carb in this video
yes i will try to get a link
www.ebay.com/itm/VM22-26mm-Carburetor-Air-Filter-Jet-For-Mikuni-110-125-140cc-Pit-Dirt-Bike-Pit/392935435722?_trkparms=ispr%3D1&hash=item5b7cc6edca:g:-nEAAOSwjFVfO4Ek&amdata=enc%3AAQAFAAACgBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkyMJZWL%252BqFSgQ3TOOe%252FNr7uIQ%252BykiGisAiO8ok217p1vPg9hwJDl%252FX%252Fcsbvl3B2WM3FsNe%252FAXB8jpU3%252BAVOsUFvQd63%252F1Swpp5LjDfzhM5QPWJZsSBkQVXnaEC%252F9OmfYr64bf97sT9iMZh8i85H4ESnT7%252FbtffLhTGCU2LAo5DyDgX7ldbIPmRxYdh7GXi%252BNTTrdvJlj2Ndk%252Btji7woZjTSexOHtQAe1cCMw8eSi8BezLXmKRNd3ZDK5nfNREAP5r%252FxnptQtXXriwNqxYSsVleIURq9jK%252BgV2J5pKTrUqRrHhNvxqucxIvaod%252B83b28u2tHzX91cgk8G2nj%252F2K%252FbGSavItuMmtq1t7x6YJN%252FdaJmb8JHQPOQ0Nihb6ayUgVjyxjZEGwBgZ%252B1jZHafxyeNDLto3MXltcodi5x9390SuKuT7BPWL3WTXhm7ULE0Rpw0m5TiaAJ%252FXKyggcCoFr3iNd1OSoasOy8iqe3quex3aOB%252F1UCL1Qi28326nYZIK1nYHowv%252FNhXxrWSkfZWPDtw2AOmcfQiRjKTVVkmeQ0sQjrtP3tWmDAUB7hAOg7K3bldC8BvXW45HPqOjC%252BeFXo9JXkCMFqOrGEJY9mxC2z%252F4jOJF51EA3Y0L1u%252B6H9Wa0aYnhqnHsn6SoYN0E7qdTrVAQwJzvZnbTB4OXvLfQM%252BNsND%252Fu0s8yrbKVtVtIIQfWeyqstv%252BCqFRrni3H440GOtlAMwUpMo%252Bxv5N4%252FkCFou2F5Ao0rTAfMd81a5LdUML8F%252FYrd6jGy%252BpkUhtfF7yxcRFSfILmOAnNsOZZRSY4id3xA%253D%7Ccksum%3A392935435722f2b71563785b4931a16591d468385342%7Campid%3APL_CLK%7Cclp%3A2334524
www.ebay.com/itm/VM22-26mm-Carburetor-For-Mikuni-110-125-140cc-212cc-196cc-GX200-Pit-Dirt-Bike-US/143685745632?_trkparms=ispr%3D1&hash=item2174567be0:g:TPIAAOSwcAFfOdcO&amdata=enc%3AAQAFAAACgBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickk7d4nremBkvNKtcC0ZwqXDHFf3bwj8DmxVP%252BWhIfGd3sZdmqxaAlBC2YdYpi%252FTTlBsN%252Bt7I4ClPlagb4Zsk61jXABz9od%252BkZ64DFJJVmT51BQ8dLBVUMwDlqkbSzIA1Ne37CgnK980rsvcvoUT3qM1ATtZ0lyCjx6TKduc5Ws7U4aHETE%252F8IVLR5ASpHrWYemR7bDW%252BlMHT3qm3hIOouwsYy9VPdznmrkmEtn0uMCXn4A%252Be%252Bie5wK0fkBIrVi63nuGXTB3HvX4uYlAfWNw3xUar2oelYyofR3f0ZejcEQfXbMdtszqJmI3OHEbZN6I%252BehRkqJFG4U9srAN4hpuoqLKq329W9AVzbBOMIoofxTowuLXaPK%252Bj%252BSTsbYom%252FaSkvzOmgb8OIbXQvL5GaoZoXT%252FxXEHl2P7dkIoelKxSKg45oIq24NO%252FTcdeTpca%252F85V6La0BaYF9MnXWG6hbODnh9WXkoUPoxvaIW04Ig6GnpkRmZvQonAnQj6SmYjz0x50%252FtEJxAHb%252F7rihWCf1LHuCy82BbJLvYpFuE108ymFUrBtrD1K3GW1leOEshn4VOjqPvHinXR5atFFOOtdET7QOfd8L%252BkD5EtnxpowosvN7Hb%252FvR4ixCL2MCd1iqE4q6OtSyy1jOe4GhWSSJIZKFfa9adNQSzPEvzpVmKmlcNJqph4srShwgkEitnxNFDd%252FBaqcHA8m7FDXixCPevSttRK8fZpxbeZT8QGrjd0M0Hz6gJ%252Fp%252BFBy%252BAgab41FbSOUfAmkECmWd1kcKEBmsWtd72wF22XOi29zq31eJhDvJq8%252BjEs4%253D%7Ccksum%3A143685745632f2b71563785b4931a16591d468385342%7Campid%3APL_CLK%7Cclp%3A2334524
one is with jets one without
how easy would it be to lower the seat height?
I never tried but u can adjust the suspension
@@bearkreekboys thanks!
The rear shock looks like it's upside down
Hey what's the size of the carb. The one I have has PZ27
26mm
@@bearkreekboys ok .. Thank... Does it make a difference or nuh... Sorry I'm still kinda of new to all these dirt bikes
@@2103tony is that an aftermarket carb?
@@bearkreekboys idk I think it's a stock..I bought off offer Up
Where did you buy it
Superiorpowersports.com
What is the price of that tao tao 140cc motorcycle?
900$ shipped I believe
Okay friend, keep uploading videos doing wheelies with the tao tao 140cc👍
Hey is it the same size as the rm85 big wheel?
I'm not sure on that you may have to research it I'm guessing this is slightly bigger in ride height than the 85s
@@bearkreekboys ok thanks
@@bearkreekboys because I'm 5'8 and I'm trying to see if I would be able to ride this bike
Gotcha! It's a bit big for a 140cc u might be okay being 5'8"
@@bearkreekboys ok thanks for the tip!
What carburetor do you recommend
Vm22mm or nibbi I think I have a link in some videos description on our Current videos!
@@bearkreekboys hell yeah thank you bro appreciate the info and reply 🙌🏽
Would this fit somone 5 foot 2?
It's a bit big for someone that size might want to get. 110 or 125cc
I’m about 5’0 and I was able to ride it but I had to lean on my right foot in order to stop
Where u buy it
Superiorpowersports.com or there is a link to another website in the comments somewhere
do you think I could ride this bike if im 5ft3? Also, what gas does this bike take thanks im kinda new
It's gonna be big for you seeing that u r 5 3
Premium 91 or 93 octane
Bro plis que tipo de gasolina usa y aceite
podrías usar la gasolina más barata
I'm very abusive on my bikes, do you think this bike could handle it. For example dropping it a few times or pulling the wheelie to far back and falling.
It is okay for durability but the swing arm bushings r weak
Where do I get part for my tao 140
Dealer or tao motor.com
@@bearkreekboys is that for like big bore and performance?
Tboltbusa.com
@@bearkreekboys thank you
haha i was wondering if it would be good for someone 5ft10 didnt even have to ask thanks
James Orend yeah it would be I’m 5,2 and I just had to lower it a bit but it would be perfect for your higher and you can make it higher by tightening it a bit
@@urinesoakedtroglodyte5764 lol im 5'3" and im a children
Would it push 265 lbs???
I'm sure it would! We had a 200 pound rider no issues ride it
What gas it takes???
Premium 91 octane or 93
Hy I'm 5,4 and 125lbs I bet I could probably get it 2 55 or 60 mph I hope so .
Change gearing and u can
@@bearkreekboys bet how much would that cost because I know nothing about mechanic's.
Gearing is pretty cheap it's just changing the sprocket on the front or the back you have to do some research to see what tooth sprocket you need to increase your top speed
So should I buy a tao dirt bike?
Are good bikes just realize if you are going to ride it hard it's not going to hold up to the name brand stuff
If you don't want to stick a lot of mods and money into the bike then I would just get a name brand it's just want some in the bomb around on and have fun it's a great bike for that it's just not performance ready out of the box
@@bearkreekboys Thanks for providing me with this info buddy 👍
No problem would love to see you subscribe to us and watch all of our videos too
@@bearkreekboys You replied and gave me some solid information. Thanks so much. *Subscribed* ➕✅
Taken er for a little Monica Le-ripski eh bud
I’m like 5ft 6 should I get it
It's a little big for you being 5 ft 6
Alrofht
Lol I’m 5ft 3 and I have this bike
How tall is he?
5 11
Technically chains don't stretch
I disagree
@@bearkreekboys they wear and the play makes for slop and length
Yes stretching occurs like on a timing chain as well
@@bearkreekboys Stretch" is the wrong word to use.. because metal doesn't stretch
But the pin holes that go through each link get worn out and elongate, and if you lay an old (abused) chain down flat you can see it will extend/compressed (aka 'stretch') quite a bit
Minty taotao
I’m 5 foot 5 ima get it lol
I have a parts diagram for it
recorded on iphone 60
I got this bike and the carburetor cought on fire so I would not buy it that’s just my opinion
How does a carb catch fire?
It's like watching 2 perrot talking. One is saying something and the other repeat it .
Thus is true
Old Honda engine clones!
Should run forever!
Better off staying with that knock off I heard the other one you have jetting problems $85 bucks
Here are some schematics not all but some! partskit.com/product/search/model/schematic/A006249?vm=DBX1&vn=Dirt%20Bikes&vc=0588
U guys are definitely Canadian
Lol no
MMO really damn
The seat hurts like a mf and I'm average size a buck70 5 foot 9
Can I get this bike for free