All the hard work will pay off in due time, thanks alot for the content. Sure does look nice with that new trans, I'll be sure to keep you in mind if I have any questions with mine🤘
So basically, for a shopping list, I will need: 1. Z32 Rs5r30a from Z1 motorsports, around $2K 2. A Pathfinder/D21/Frontier FS5R30A bellhousing 3. Z31 Fidanze flywheel for about $300 4. Excessive Manufacturing shortened shifter bracket, meant for putting a Z32 trans into an S13 240sx 5. A 350z clutch fork and throw out bearing 6. New RTV gasket maker. Will need to modify trans mount slightly, swap pivot ball from RS5R to FS5R, and spring loaded ball for shift linkage from FS5R to RS5R. I took a ton of notes from this video, but I'm redoing soooooo much from my '85 Z31, and this trans swap is the only thing stopping me.
Hey man, I am a big fan of your channel and love seeing the progress on the Z. I currently own an 88 z of my own and stumbled on yet again another issue. I am having problems finding another throttle cable and wondered if you could do a video talking about possible replacements. I am looking at a 200sx throttle cable, but would the part be interchangeable?
I'm not aware of any cable other than a stock z31 cable that works. You can try looking for a z31 cable though. They were available new until recently. Looks like they just went out of stock but if you call around to your local dealers you may be able to source one still. It's part number is 1820001p02
Great job on another informative video. I'm getting ready to do the same swap, but I'll probably mount the starter on the transmission instead with a spacer plate. This video will be a perfect guide for everything else!
I'm going to be running a Z32 speed sensor wired into my gold box. You could also use a z31 30a speed sensor which is also electronic on 87-89 Z's it should plug and play. If you have a cable driven speedo, I'm not sure what would work.
Nice video! Great work. Just wondering if the stock z32 shifter rod would have positioned the gear stick in a more central location. From the video it looks like your shifter is closer to the centre console than central.
Just picked up an Xterra 30a and I’m planning on doing this. Any advice you would recommend after doing this? Do you still have the driveshaft you used in this video since you swapped it for a z32 trans?
So I have a 1986 Z31 turbo, and I want to swap it from auto to manual, what would be the cheapest/easiest transmission to install? Not planning on doing anything crazy with the car so I assume it would be a z31 transmission
Yep, a z31 transmissions would be the easiest and cheapest to swap. Any of the 3 are bolt on, with the exception of the driveshaft. You would need a custom drive shaft if you used a 30a transmission since it never came in the early year cars.
I got mine from shaft masters. They have stock z31 drive shafts, but if you tell them the length, what differential (the z31 has a few different flanges), and transmission you have, they can make you a shaft to fit any transmission
Hey bro I got a question and since you know a lot I figured I'd ask you. What i wanted to know is can i take a t5 from a 1984 Nissan z31 turbo and put it in a 1987 mustang GT. Also my stang is a auto, so im planning on converting it to a stick shift.
As far as I know I don't think they're the same. The bellhousing for sure is different but I believe there's some other differences as well. If you had a used mustang trans you wanted to swap the gearset into that may work. But again I'm not really sure what the differences are
Hi … I got an 87 300ZX 4 seater Turbo ( I’m from Canada ) .. It’s an automatic I really want to properly do a manual conversion .. What are my options here ? Which manual transmission does my car need since it’s a 2+2 Turbo ? Thanks in advance.. hope to hear 👂
All transmissions that came in all z31's can swap with each other without issues. However, being a turbo car I recommend either the t5 transmission or 30a transmission as they hold power a lot more reliably than the 71c. The 30a is the best if you can find one, but on a stock car any transmission in good condition should work just as well as the other.
I experienced that weird binding on mine too. Luckily I noticed it when installing the shifter and got it fired up. It has something to do with the part that cracked on your truck 30a it seems like if it’s not in the right spot it binds up.
If your Z is cable driven you can use a 30a pathfinder speed sensor and if it's the later style electric sensor, a z32 speed sensor will work. You may need to play around with the gear on the end though to get the right tooth count so your speed is correct.
Correct. In that case you would use a Z32 crank, flywheel, and starter. I'm not sure of all the differences between a z31 and z32 crank on the front end. The way the oil pump and drive belts line up might be different
hey! i’m pretty new to working in cats but i just recently bought a 88 2+2 non turbo and my fuel pump isn’t turning on, i went and replaced it thinking it wasn’t working, but after replacing it still no buzzing when i turn the key into the ignition
First thing to always do is check for power at the pump. Use a multi meter to check for power at the harness in the trunk. If it's getting power then your issue is pump/harness related. If it's not then start working your way backwards to the fuel pump relay, and then the fuses. Remember the fuel pump will only prime when the car is not running so it will not get power constantly. Don't get fooled if you don't see any power, make sure to cycle the key and see if it changes.
All the hard work will pay off in due time, thanks alot for the content. Sure does look nice with that new trans, I'll be sure to keep you in mind if I have any questions with mine🤘
So basically, for a shopping list, I will need:
1. Z32 Rs5r30a from Z1 motorsports, around $2K
2. A Pathfinder/D21/Frontier FS5R30A bellhousing
3. Z31 Fidanze flywheel for about $300
4. Excessive Manufacturing shortened shifter bracket, meant for putting a Z32 trans into an S13 240sx
5. A 350z clutch fork and throw out bearing
6. New RTV gasket maker.
Will need to modify trans mount slightly, swap pivot ball from RS5R to FS5R, and spring loaded ball for shift linkage from FS5R to RS5R. I took a ton of notes from this video, but I'm redoing soooooo much from my '85 Z31, and this trans swap is the only thing stopping me.
Hey man, I am a big fan of your channel and love seeing the progress on the Z. I currently own an 88 z of my own and stumbled on yet again another issue. I am having problems finding another throttle cable and wondered if you could do a video talking about possible replacements. I am looking at a 200sx throttle cable, but would the part be interchangeable?
I'm not aware of any cable other than a stock z31 cable that works. You can try looking for a z31 cable though. They were available new until recently. Looks like they just went out of stock but if you call around to your local dealers you may be able to source one still. It's part number is 1820001p02
Great job on another informative video. I'm getting ready to do the same swap, but I'll probably mount the starter on the transmission instead with a spacer plate. This video will be a perfect guide for everything else!
I've never seen it done that way! Let me know how it goes!
Question where can I get a bellhousing that would fit the 71c
can you tell me the Fidanza maxima flywheel part number, I have a brand new trans like you, but want to use brand new z32 starter
so what would be easier? installing the engine and other insides from the z32 into the z31 OR trying to fit the body frame of a z31 onto a z32?
I am doing the same. What did you do with the speed sensor?
I'm going to be running a Z32 speed sensor wired into my gold box. You could also use a z31 30a speed sensor which is also electronic on 87-89 Z's it should plug and play. If you have a cable driven speedo, I'm not sure what would work.
Nice video! Great work. Just wondering if the stock z32 shifter rod would have positioned the gear stick in a more central location. From the video it looks like your shifter is closer to the centre console than central.
From what I've heard you need to cut the car to use a stock z32 shifter. It's decently longer than the shortened bracket
Just picked up an Xterra 30a and I’m planning on doing this. Any advice you would recommend after doing this? Do you still have the driveshaft you used in this video since you swapped it for a z32 trans?
The drive shaft for the pathfinder and the z32 transmission are the same length so I only had to get the one
Ayyyy I did one too on my 1988 turbo 300zx
So I have a 1986 Z31 turbo, and I want to swap it from auto to manual, what would be the cheapest/easiest transmission to install? Not planning on doing anything crazy with the car so I assume it would be a z31 transmission
Yep, a z31 transmissions would be the easiest and cheapest to swap. Any of the 3 are bolt on, with the exception of the driveshaft. You would need a custom drive shaft if you used a 30a transmission since it never came in the early year cars.
@@TheZGarage Ok thanks a lot, appreciate what you do
Great video 👍🙏
Does the stock z31 driveshaft go in without a problem.?
No you need a custom driveshaft to use a Z32 style 30a because the case length is different
@The Z Garage i see where did you get yours.?
I got mine from shaft masters. They have stock z31 drive shafts, but if you tell them the length, what differential (the z31 has a few different flanges), and transmission you have, they can make you a shaft to fit any transmission
@@TheZGarage great i was thinking of buying a driveshaft from them anyway.. might as well take care of the transmission in the process, thanks.! 🙏
Hey bro I got a question and since you know a lot I figured I'd ask you.
What i wanted to know is can i take a t5 from a 1984 Nissan z31 turbo and put it in a 1987 mustang GT.
Also my stang is a auto, so im planning on converting it to a stick shift.
As far as I know I don't think they're the same. The bellhousing for sure is different but I believe there's some other differences as well. If you had a used mustang trans you wanted to swap the gearset into that may work. But again I'm not really sure what the differences are
Hi …
I got an 87 300ZX 4 seater Turbo
( I’m from Canada ) .. It’s an automatic
I really want to properly do a manual conversion .. What are my options here ? Which manual transmission does my car need since it’s a 2+2 Turbo ?
Thanks in advance.. hope to hear 👂
All transmissions that came in all z31's can swap with each other without issues. However, being a turbo car I recommend either the t5 transmission or 30a transmission as they hold power a lot more reliably than the 71c. The 30a is the best if you can find one, but on a stock car any transmission in good condition should work just as well as the other.
@@TheZGarage
Thanks Buddy ☺️👍
I experienced that weird binding on mine too. Luckily I noticed it when installing the shifter and got it fired up. It has something to do with the part that cracked on your truck 30a it seems like if it’s not in the right spot it binds up.
How did you get the speedometer to work with the z32 trans?
If your Z is cable driven you can use a 30a pathfinder speed sensor and if it's the later style electric sensor, a z32 speed sensor will work. You may need to play around with the gear on the end though to get the right tooth count so your speed is correct.
Hows its drive the bell housing is it holding up?
Yep everything works well with the bellhousing swapped
@@TheZGarage nice thanks for the feedback thinking bout swapping it . Its has original turbo trans right now, might just rebuild it tho
I have a 30A - in great condition I live in ABQ.
I have a z31 30A**
I could have used that info 3 months ago haha!
how much thooo
How many miles are on it, and is the mileage verifiable?
With a z32 crank a z32 trans is a bolt on swap right?
Correct. In that case you would use a Z32 crank, flywheel, and starter. I'm not sure of all the differences between a z31 and z32 crank on the front end. The way the oil pump and drive belts line up might be different
🏆
hey! i’m pretty new to working in cats but i just recently bought a 88 2+2 non turbo and my fuel pump isn’t turning on, i went and replaced it thinking it wasn’t working, but after replacing it still no buzzing when i turn the key into the ignition
First thing to always do is check for power at the pump. Use a multi meter to check for power at the harness in the trunk. If it's getting power then your issue is pump/harness related. If it's not then start working your way backwards to the fuel pump relay, and then the fuses. Remember the fuel pump will only prime when the car is not running so it will not get power constantly. Don't get fooled if you don't see any power, make sure to cycle the key and see if it changes.