Everything NOT TO DO in pottery ! Serial Broken Pottery
Вставка
- Опубліковано 4 жов 2024
- Here is an anthology of my worst kiln openings! This video is here to show you that no, Pottery is not that easy, everything doesn't always go so well! ;D
If you enjoyed this video, consider helping out by supporting me :
🟧 / gregceramics
▶️ / @greg-ceramics
For a single donation you can use:
☕ www.buymeacoff...
🏺 All my creations and e-shop on www.greg-ceram...
🛠️ My tools :
Homemade Tools : www.greg-ceram...
Essential Tools (Amazon) : amzn.to/3V76ZZ2
If you want to follow me:
/ gregceramics
/ gregceramics
/ greg-ceramics
------------------------------
Track: Odyssey - WOMA [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Odyssey - WOMA | Free ...
Free Download / Stream: alplus.io/odys...
------------------------------
#pottery #bonsai #ceramic #handmade #making #clay #bonsaipot #pot - Навчання та стиль
Thank you to the donors who help me make these videos possible. 💝
You can support the adventure here 👇
🔗 www.patreon.com/GregCeramics
🔗www.buymeacoffee.com/GregCeramics
🔗fr.tipeee.com/greg-ceramics/
🔗utip.io/gregceramics/
So sorry about all your fails. The good thing is now we know you are a real person! You make so many magnificent pieces you are still way ahead of the game.
I feel your pain, but this video was so satisfying. Flawless Victory!
Yes, I turned defeats into victory! :D
Avec la numéro 6, j'étais super raccord avec la bande son. Bon, si j'ai bien lu tes réponses... il faut savoir s'accrocher et continuer malgré les ouvertures de four qui crèvent le coeur. Merci pour cette jolie leçon, ton humour et ton humilité et ta générosité dans le partage de ton savoir et de ton talent. ❤
Merci. C'est surtout pour montrer que ça arrive à tout le monde, et que c'est normal. Sur internet, on montre beaucoup ce qui fonctionne, mais les erreurs font partie du quotidien. L'important, c'est d'en apprendre quelque chose pour que ça se reproduise le moins souvent possible.
Heureusement, cette vidéo est une compilation sur beaucoup de cuisson, aujourd'hui ça m'arrive quand même très peu. 😄
Oh my! I feel for you, I just had a large pot (17 inches across) crack before I put it into the kiln. I put small rice bags inside it as it was drying so the center doesn't rise. I forgot to put something under the pot so it wouldn't put too much pressure on the center, cracked and hours of work wasted.
We learn by the mistakes we make not by our successes (funny I keep telling myself this).
Now I have very little breakage. Over time, I have identified the mistakes not to make. But I also think that I must unconsciously do things that allow me to have a better success rate, gestures that I have acquired naturally with experience.
Not long ago, I was looking through old photos of pots, and I came across a 24-inch pottery that I had to remake six times (an order). Today, I know that I will succeed on the first try, but without knowing 100% why.
That’s enough to make me cry
That very first pot is amazing, looks so good.
Thank you 😄🙏
Oh boy, #8 made me cringe, such beautiful glaze and this tiny crack, oh no!
it happens, with the number of pots I do each year, it's not much. Thanks to that I was able to make a funny video!
@@Greg-ceramics If it didn't happen the successes wouldn't feel so sweet! And yes, the video is awesome and funny, I shared it with my fellow potters, we can all relate to this
It's so frustrating after a huge effort anda time spent to have this fails...but that is the real life
Yes, you have to accept it, it's part of the job. 😅
Luckily, that happens rarely.
Nossa seu trabalho é incrível, que dor no coração esse vídeo de ver eles quebrados kkk, alguma dica para quem está começando a fazer os vasos obg
This is awesome. Thanks so much.
Thank you 😄🙏
My gosh if everyone would just understand this it would make life easier for us potters wouldn’t it!?! Do you use silica sand or anything else to put under your pieces so they glide on the shelf while firing?
Yes I put sand, especially under the big pots. But even when you take all the precautions there is always a part of uncertainty, it is always a little anxiety to open the kiln. Fortunately 95% of the time it goes very well.
Have you tried putting sand underneath the pots to allow expansion/contraction
Yes, as you can see in my last kiln opening video ( ua-cam.com/video/6fR6e2OQ6x0/v-deo.html ), I put sand under the big pots.
But luckily that doesn't happen often, the majority of my pots come out correctly ;)
Ah ! donc ça vous arrive aussi des accidents!🤣Ouf, vous êtes donc un humain comme les autres...
Bref ,qu'elle déception après tant de travail.
Vous faites preuve de beaucoup d'humilité, c'est tout à votre honneur.
Merci.
J'ai fait cette vidéo pour briser un peu un mythe, on ne montre souvent que ce qui se passe bien, mais la réalité c'est aussi ça. Bon là c'est un condensé, mais la plupart du temps ça se passe quand même très bien. ;)
l'important à chaque fois c'est de comprendre pourquoi ça n'a pas été, pour toujours s'améliorer. Dans cette vidéo il y a des photos qui datent de mes débuts, des erreurs que je ne commet plus aujourd'hui.
I found your chanel today and love your clear presentation! 🥰 so what happens to all your broken pots!?
Thank you, welcome aboard.
Sometimes I use some broken pots still usable for my own trees. But most end up in the trash. This video is a digest, but fortunately the vast majority of my pots are ok ;)
I feel your pain ,
Cuántas horas de trabajo perdidas. Pero ánimo nunca falta 💪💪💪💪💪
es parte del trabajo, a veces es exasperante, pero lo acepto ;)
Great videos, thanks for sharing!. I have experienced similar failures. In my last one, I had a fracture line between the draining holes like the ones you show in this video.
Do you have any guesses on how/why these happen and how to avoid them?
Thank you for your videos.
Thank you Enrique.
It's hard to say, there can be so many different causes. But most often it is because of too fast drying.
@@Greg-ceramics thanks for the quick reply. Your explanation makes sense.
At the location where I fired the pottery, I was informed that the issue might have been caused by the inadequate coverage of the pot's feet along its entire length. I however speculated that insufficiently mixing the clay could have led to the formation of air pockets within the mixture.
@@enriqueazvz Yes, there can be many causes. Air bubbles are a possible one.
Having failures is as important as successes, even if it is not pleasant, it is thanks to failures that we progress. You have to experiment and find the causes, it will turn your failures into success.
I started pottery 10-15 years ago, alone, without lessons, without help. For 1 year I made all possible mistakes, it was very hard, but I learned a lot. Everything I know today comes from my mistakes. 😉
It was results like that that made me stop making big bonsai pots
I almost gave up the big pots too, but with each failure I tried to figure out what was wrong, and today my breakage rate is quite low. But it took me a long time to get there.
Me encantan tus macetas, desgraciadamente no todas salen bien del horno es algo normal, nos a pasado a todos Gred
Sí, así es la cerámica 🤓
excellent le montage !!! Une belle leçon aussi, merci. Tu as un pourcentage de "casse" dans tes cuissons ou ce sont des accidents ? Et aussi, tes pots sont magnifiques. bravo
Merci :)
à ce jour la casse est quand même assez limitée. Les fissures au fond des grands pots c'est quelque chose que je ne peux pas maitriser à 100%, et c'est le plus frustrant. Les pots dont l'émail colle au four, c'est un risque que je prends pour avoir des émaux particuliers (disons que je joue avec les limites). Globalement la plupart des cuissons se passe assez bien ;)
Vidéo très intéressante, mais j'ai une question un peu bête: que faites vous des pots cassés? Y'a t-il moyen de les réparer ou bien ils finissent à la poubelle?
en fonction de la casse il m'arrive de les utiliser pour mes arbres, les autres finissent à la poubelle.
@@Greg-ceramics Merci pour votre réponse :)
Felicidades, Me gustó como cuentas estas cosas. Pregunta, ¿Alguna de las macetas apenas quebradas se pueden reparar?
pasa, cuando la rotura es franca y bonita puedo repararla con la técnica de Kinstugi (reparación japonesa con oro), le da nueva vida a la olla. Pero es bastante raro, la mayoría de las veces terminan en la basura.
les belles pièces e peuvent elles pas être cassées franchement et réparées avec la méthode kintsugi? cela redonnerait vie et une valeur certaines a ces beaux pots😏
je l'ai déjà fait, mais il faut des cassures interessantes. La cassure la plus récurrente c'est la longue fissure dans le fond du pot, c'est pas top pour le Kintsugi.
feels bad man
Merci pour vos videos et bravos pour la qualité de vos pots à bonsaÎ. Quand un pot ovale moyennement grand (longueur 30 cm) se vrille à la seconde cuisson, c'est du à quoi ? trop haute température ? C'est un pot fait à la plaque, donc en prinicipe il n'y a pas de différences d'épaisseurs qui entraineraient des différences de tension.
Merci :)
je n'ai pas le pot sous les yeux, mais d'après ce que que vous dites :
- soit la terre n'est pas adapté à votre température de cuisson (le pot "fond" et se déforme),
- soit c'est un problème de "mémoire" de l'argile, il y a des moments clés pendant le façonnage du pot où il est important de bien lui donnée sa forme définitive (quand la terre commence à légèrement se raffermir, avant l'aspect cuir) ,
- soit il y a trop de tension de la part de l'émail qui contraint le pot à se déformer.
@@Greg-ceramics Merci pour votre réponse. Je ne pense pas que ce soit la terre car c'est un grès blanc donné pour 1280°. Peut-être l'émail. Cordialement.
Attention certaines terres sont prévue pour de la haute température ,mais ça ne veut pas dire qu'elles soient adaptées à votre usage. J'ai déjà utilisé certains grès qui ne me convenaient pas parce qu'ils se déformaient trop avec les grandes pièces ou cassaient trop souvent au séchage par exemple.
Aujourd'hui j'utilisent certaines terres pour mes pots classiques, et une autre pour les grands, car je sais qu'elle tiendra mieux la cuisson. Même si ce sont toutes des argiles prévue pour les hautes températures.
Bonjour
Très intéressant.
Tout le monde comprendra pourquoi les grands pots sont d un prix élevé, et qu il nous faut en tant qu acheteur y mettre le prix ...
Oui, même quand on maitrise la cuisson, il y a toujours une part d'aléatoire. Heureusement ce n'est qu'un minorité, la plupart des pots sortent nickels, mais sur le coup c'est souvent très rageant :D
Do you use some support at the bottom of the vase so that it doesn't warp?
I hardly use any supports, only on very large pots (I talk about it in the video I released today). But it also depends on the clay I use, there are clays that deform more than others. Under certain large flat pots, I sometimes put a small pile of sand in the middle so that the bottom does not deform.
@@Greg-ceramics What would this pile of sand be like as a support, my friend?
I'll try to show this in a future video, I'm doing a lot of firing at the moment ;)
@@Greg-ceramics thanks my friend.
Salut Greg , je trouve cela très remarquable de ta part de vous faire voir tes échecs , les poterie fissuré ou explosé sont du a quoi ? un four trop chaud , ou c'est l'argile qui contenait encore trop d'eau ? (ce ne sont que des suppositions je n'y connais rien en poterie )
Merci .
Ceux qui sont en miette, c'est un manque de séchage (je le sais l'importance du séchage, mais parfois je continue d'être trop impatient) ^^
Sinon les grand pots se fissurent à cause des tensions à haute température, à la cuisson le pot diminue en taille de 9-10%, il faut que la déformation soit uniforme sinon ça casse. c'est pour ça que c'est souvent les grands pots qui casse.
@@Greg-ceramics ok ok Merci , en attendent de ce croiser sur un salon , bonne continuation .
Te compraría esas con fallos.
¿ No me digas que te has deshecho de ellas?
Si no están completamente rotos, a veces los uso para mis árboles. 😉
Think they should give up pottery
especially not, it is the failures that make progress
😯😔
Auch Mal schön zu sehen das nicht alles klappt