gracias. fuel line leaks in the engine compartment are very dangerous. like someone else commented, i'd also replace the fuel line that goes from the fuel tank to the fuel filter. thanks for making the video. buena suerte.
Trying to capture everything on camera is not always easy and makes the job take a lot longer, so I really appreciate the positive feedback on this. Thanks for watching!
THANK YOU!!!! This is exactly what I needed to see. I wouldn't have even thought of pulling the #11 fuse. My E30 developed its fuel hose leak on the interstate yesterday. I could see the fuel gauge go down by the foot, not the mile! Half a tank of gasoline in 43 miles. Great video. Pretty E30!!
That is one of the main reasons I take the time to make these videos! To motivate more people to DIY. Save some money and get to know your car better. Thanks for watching and good luck.
@@NoGaragE30 Thanks man, just had a look and I have a huge slice in the short zig-zaz shaped hose. I’ve been smelling tons of gas coming through the air vents lately. Such a shame cause I just got new wheels and cleaned the E30, but now I can’t drive it till it’s fixed! It’s a 1985 318i, so I was expecting the hose to go bad sooner or later 😂
Check the upper and lower vacuum elbows that are on the throttle body. Your upper appears to be coming out of the throttle body. This is super common on the M20 B25 engines. It allows a small vacuum leak and will affect performance. These elbows have splines and are press fit into the throttle body and over time they can work themselves loose. Best to use a sealant of some type after pressing them back into the throttle body.
Dude, cool vid but can i just say. If you have a tear in your hose , it can be fuel hose hydraulic line what ever. You will never have pressure in it. Why? Cause u already have a tear where the pressure leaks out with your fluid! :D Just keep that in mind !
I will give that a try. I had the cluster out not long ago and replaced all odometer gears but the odo is still stuck! I've been wanting to take it out again just to check if I messed up with one of the gears. Now I have another reason to do it I guess, thanks!
These lines ended up failing after some time as well, spraying gas inside the engine bay again. Im now using cloth braided 6Bar lines that are much better quality and stronger than the CRP lines I used on this video.
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
Finally someone who shows the actual work needed to do the job!
gracias. fuel line leaks in the engine compartment are very dangerous. like someone else commented, i'd also replace the fuel line that goes from the fuel tank to the fuel filter. thanks for making the video. buena suerte.
Still have the fuel tank line on my todo list.
I love how I could actually see everything you were talking about and everything made sense. I wish I could do this under 12 min like in the video lol
Trying to capture everything on camera is not always easy and makes the job take a lot longer, so I really appreciate the positive feedback on this. Thanks for watching!
THANK YOU!!!! This is exactly what I needed to see. I wouldn't have even thought of pulling the #11 fuse. My E30 developed its fuel hose leak on the interstate yesterday. I could see the fuel gauge go down by the foot, not the mile! Half a tank of gasoline in 43 miles. Great video. Pretty E30!!
Man, you make it look so easy!
Giving me mad confidence to do this myself instead of getting screwed by Firestone.
That is one of the main reasons I take the time to make these videos! To motivate more people to DIY. Save some money and get to know your car better. Thanks for watching and good luck.
@@NoGaragE30 Thanks man, just had a look and I have a huge slice in the short zig-zaz shaped hose. I’ve been smelling tons of gas coming through the air vents lately.
Such a shame cause I just got new wheels and cleaned the E30, but now I can’t drive it till it’s fixed! It’s a 1985 318i, so I was expecting the hose to go bad sooner or later 😂
Just finished the job, was super straight forward thanks to you! Thanks again dude.
I know its old, but really well done video! No BS.
this video saved my life all the other videos have the filter under there cars an i absolutely couldn't find mine
Glad I could help.
Check the upper and lower vacuum elbows that are on the throttle body. Your upper appears to be coming out of the throttle body. This is super common on the M20 B25 engines. It allows a small vacuum leak and will affect performance. These elbows have splines and are press fit into the throttle body and over time they can work themselves loose. Best to use a sealant of some type after pressing them back into the throttle body.
thanks for this. I'm hoping this is what is wrong with my e30
Excellent video, mine also leaks from the same location. Glad it's a simplish fix.
Get it fixed asap. It is a relatively simple fix for something that can be catastrophic. Glad the video helps!
thank you bro... !! from Indonesia
Dude, cool vid but can i just say. If you have a tear in your hose , it can be fuel hose hydraulic line what ever. You will never have pressure in it. Why? Cause u already have a tear where the pressure leaks out with your fluid! :D Just keep that in mind !
Fair point. The fuse trick is probably a good idea anyways to help empty the lines.
Your videos are awesome - thanks for these, so helpful 👌
Music to my ears. Thanks for watching!
thank you for making your e30 videos!!
Glad you like them. More to come!
Gotta replace my hose…said by many man a time or two in life
I have this model but the gasoline goes to motor oil it has passed you
now you just need the hoses above the gas tank lol.
Oh yes, I have not even looked under the seats yet. My fuel gauge is jumping all over the place too so should check sender unit as well.
@@NoGaragE30 take the cluster out and sand the little nut behind the fuel gauge.
I will give that a try. I had the cluster out not long ago and replaced all odometer gears but the odo is still stuck! I've been wanting to take it out again just to check if I messed up with one of the gears. Now I have another reason to do it I guess, thanks!
Nice video
Thanks!
I have the same car and it continues to give me the same issue
These lines ended up failing after some time as well, spraying gas inside the engine bay again. Im now using cloth braided 6Bar lines that are much better quality and stronger than the CRP lines I used on this video.
Excelente trabajo, Thanks!!
Pro tip : watch series on flixzone. I've been using them for watching all kinds of movies recently.
@Jude Jad definitely, have been watching on Flixzone} for years myself =)
@Jude Jad yup, I have been using flixzone} for years myself =)
@Jude Jad definitely, I have been using Flixzone} for since december myself :D
thanks very helpful
How many meters of that 16121176440 do I need? it is sold in 1 meter sections 🤔. is this hose used anywhere else on the car if i buy extra?
I got the 5 meter CRP brand that was only like $10 more than 1 meter of OEM hose. I probably used less than 2 meters for this job though.
nicE musiC
Where did you get the parts from ?
Got the Bosch filter from ecstuning.com and the rest from fcpeuro.com part numbers in video description
What year is your car?
'89
I often find it a waste of time replacing it with OEM
you mean a waste of money? which part exactly?
@@NoGaragE30 lines mainly waterlines, M20 is Terribly hot silicone would be potentially setting her up for a Better future
These are fuel lines though! Can't use silicone for fuel. You definitely dont want to mess with that.
@@NoGaragE30 oh okay, you know how I can get the part number for the metal lines you connected to the rubber ones? Mine got smashed in by a lift :/
I always use a site like bmwfans.info/parts-catalog/E30/ to find part numbers. Check it out.