Wood Turning Inside Out Christmas Ornament
Вставка
- Опубліковано 12 гру 2019
- This is a very simple inside out ornament to turn I show the steps of how I use 4 equal pieces of Walnut to create the inside out turning.
I made the opening large enough to slip in an LED tealight.
It really looks good hanging in a darkened area.
Also hanging in the tree right in front of a light is very pretty as well.
These are a lot of fun to make and it is endless to what you can come up with.
The video is for entertainment purposes only
If you found this video entertaining:
Please Like and Subscribe and Share if you are inclined
Look up other turnings I have done:
Dizzy Twister Turnings
Segmented Turnings
Pierre Lussier inspired vase
Mike Waldt inspired vase
Tumbling bowls
Emerging Bowls
Black Locust Vase
Droop Bowl
Bowl in a Bowl
Offset Bowl - Навчання та стиль
Wow!
Thank you Steve!
Very nice, it’s on my list.
Thank you Dave, I am sure you will have fun making them. I sort have got on a roll and turned 6 of them this week.
Thanks for watching,
Gary
you made it look so easy, love it. l will give it a try
Thank you very much Delbert. I have a few videos on inside out turnings. And I made one that I feel helps to see how it is done.
ua-cam.com/video/fmvAoT-9Njw/v-deo.html&ab_channel=ThePapa1947
Thanks for watching,
Gary
Thanks, great work!
Thank you Keith and thanks for watching,
Gary
Nice video !!!! And great idea marking the tool holder with tape,instead of marking the wood
All the best Mary Christmas
Yiannis (Athens Greece)
Thank you very much Yiannis and a Merry Christmas to you as well.
Gary
Looks great.
Thank you I appreciate your comment and thanks for watching,
Gary
Wow very nice
Thank you so much I appreciate you watching and commenting,
Gary
Very Nice. Thank You. I knew you were going to put a candle in there 🙂
Thank you Joe. This one hangs year round in our house.
Thanks for watching,
Gary
Thanks for that answer. It’s a beautiful piece.
Thank you!
Gorgeous
Thank you Jeff. Happy you like it and thanks for watching.
Gary
Great video, great job...
Pops1947 here.. 👍
Thank you Pops 1947 and thanks for watching,
Gary
Beautifull !!
Thank you Philippe and thanks for watching.
Gary
Great job. I’m going to try this. Thanks
Thank you James and have fun making one of these.
Gary
Sehr schön 🤩
Bedankt
Very well done, Sir. I saved this video for future reference. I wish others would adopt your no-nonsense style of narration and instruction.
Thank you very much Brad. I appreciate your comments and I just try and be me when making these videos.
Thanks again,
Gary
Beautiful
Thank you Doug and thanks for watching,
Gary
excellent lathe idea
Thank you! Cheers!
Gary
HI gary i am sure I seen this video but really nice to c again. cooooooooooool.
Thank you Manjit and I have another one coming in a few weeks.
Take care,
Gary
Fantastic Gary it.
Thank you Kobie. I plan on doing another one soon.
Gary
A very lovely and unique 0rnmiment💙💙💙💙💙💙💙
Thank you very much. Happy you liked it.
Gary
Amezing idea and task
Thanks
Thank you very much and thanks for watching.
Gary
WOW, Beautiful
Many many thanks happy you liked it Renta Kraft.
Gary
Nice !
Thank you Jorge and thanks for watching,
Gary
Gary very cool.
Thanks Kevin, happy you liked it.
Take care,
Gary
I have often wondered how in the world you hollowed out the inside. Now I know how its done. It was so simple well I know it’s not simple but you made it look simple.
That’s awesome thanks
Thank you William! And thanks for watching,
Gary
👏👏👏👏👏👍👍👍👍👍👍
Thank you very much!❤❤❤❤❤
very nice, thanks
Well thank you very much Capt. Eddie it is an honor to have you watch and comment.
Take care,
Gary
Brilliant
Thank you very much and thanks for watching.
Gary
great job
Thank you very much Mark and thanks for watching,
Gary
Я такую делал,только у меня уже готовые шаблоны на токарно- копировальном станке.Идея хорошая,мне понравилось!
Большое спасибо. Всегда приятно иметь готовые шаблоны.
@@ThePapa1947 я на вас подписан,и всегда с удовольствием смотрю ваши ролики,хоть многое и знаю,но что то для себя беру и применяю в своем токарном деле...... спасибо большое!!!
Very nice
Thank you very much Waylon I appreciate you watching and commenting.
Gary
Dear papa you thought me tons of tricks and models and I owe you a lot.thank you very much for your skill that you showed and teach us with generosity. I belive you are one of the best turner in the United States and you remind me mr. Bob stocksdale.wish you a long healthy life.
Thank you very much Michael for your very kind words.
I am happy you enjoy my videos and appreciate you watching and commenting.
Take care,
Gary
Absolutely beautiful.....
Thank you so much! I appreciate the comment George and have a Happy New Year.
Gary
@@ThePapa1947 Same to you Gary....
Great job lad I'll defs be doing this 🇮🇪
Thank you Eugene I am happy you liked it. I have only done 2 of these. This one and another after our friend saw it and I know she really loved it so I made her one. I need to do another as she wanted one to give as a gift. It will be coming soon.
Gary
@@ThePapa1947 happy days true crafts man you are 🇮🇪
Love iit. Beautiful
Thank you! 😊 So happy you liked it.
Take care Gary
nice job!
Thank you very much!
THAT WAS AWESOME. ... Simple but beautiful.... Thanks so much for the video...
The Frye Guy...
Thank you very much Frye Guy!
Awesome! (as usual!!)
Thank you Michael and thanks for watching.
Gary
A great gift for someone in the family.
Thank you Don and yes it was gifted to my wife. So I get to see it all the time. It hangs all year here.
Thanks for watching,
Gary
I'm blown away by this technique. Beautiful craftmanship sir
Thank you very much! They are lots of fun to do. Happy you enjoyed this one.
Gary
I started back in March on my 12 × 20 lathe and in addicted. I will surely try this idea with some spalted cherry I have hanging around. Nice work and thanks for sharing!
Thank you Chris. It is not all that hard to do.
My first turning was in 1961.
Have loved it since.
As a wood patternmaker I did lots of turning.
Have fun,
Gary
This is lovely - and the tea light is the perfect touch!
Thank you Mary I was glad the light fit inside. I had them from a different type of turning and they fit right in.
Thanks for watching,
Gary
The stunning geometric feedback result you got from this solution, Gary. Awesome work and candle light gives warmth from your work. Thanks for sharing this experience !!!!
Thank you for your elegant words my friend. It is 4:45 in the morning here and your words and a cup of coffee has warmed my heart.
Take care,
Gary
Loving the piece Gary. Thanks for showing us the way 👍😀🙏 -Mike
Thank you Mike I am happy you liked it and I hope you plan on making one. They are lots of fun.
Take care,
Gary
What a great ornament Gary, beautiful finish too! Thanks Gary!!
Thank you so much Bruce. I am am really happy with it. So much I made one similar the next day out of oak for a friend.
Thanks for watching buddy
Gary
Very amazing job. I love how you can get it so thin and yet finish it so well. Thanks
Thank you very much Charles I appreciate your comment.
Gary
Beautiful! The candle was a great idea! Thanks for posting
Thank you very much Joshua and thanks for watching,
Gary
Thank you for sharing your expertise, Gary. You did a super job on this piece.
Thank you so much Gerald your comment is much appreciated.
Take care,
Gary
Love the tea light!
Thank you very much Douglas!
Gary, it’s always a pleasure to see you at work, beautiful deco. 👍
Thank you very much Denis I appreciate your comment.
Take care
Gary
What a fine job! And a great idea! I like the inclusion of the "candle" in the end. It really suits the piece!
Thank you Michael I am happy you like it. I am really happy that candle fit inside. But it also looks good with a Christmas light shining through it while on the tree.
Thank for your comments.
Gary
I've never seen this technique before it's so awesome
Thank you so much my friend. I am happy you like it.
Gary
Tricky paying turning off beautiful. Great video.
Thank you Gerald glad you liked it.
Gary
Wish I could give it 4 time's up! Gary I like that you do a great job explaining everything.
Thank you,Ken
Thank you very much Ken for your comment. It is most appreciated.
Happy you liked it.
Take care,
Gary
Just a delightful & beautiful piece Gary. I love the effect with the tealight in it.
Thank you and these are fun to make. I do need to get busy and make another one soon.
Gary
Can’t beat walnut to make a beautiful exquisite piece. I like the way you go at a project very methodically taking small cuts at a time. The end result is obvious. The camera close-ups are fantastic. Thanks for sharing this beautiful Christmas ornament.
Thank you very much my friend I am happy you like it. I hope things are going well with you.
Let me know how the project is going.
Take care,
Gary
I suspect I'll be asked to make some Christmas ornaments this fall.
Not all that hard to do.
Have fun Dave!
Gary
That was fun to watch and really gets the mind working on what other shapes one could turn, inside out! Thanks for sharing.
Thank you Bob...I would say it is endless to what shape can be made. I have another idea I will try. This one showed me it will be possible.
Thanks for watching and comment.
Gary
I always love your teaching. Thank you
Thanks so much Melissa. Happy you enjoy my videos.
Thanks for watching,
Gary
Really cool! I have a hundred ideas for ornaments but don't have a lathe.
Thank you Judith. They are really fun to make. Sounds like you might be wanting to get a nice small mini lathe.
Thanks for watching,
Gary
A wonderful piece of woodworking art. Thank you for sharing
Thank you very much I appreciate you comment.
Gary
I watched it again,enjoyed ❤️👍
Thanks so much William I appreciate you watching and commenting.
Gary
Beautiful, Gary. I really like the tea light idea. You could also turn a small Christmas tree for the inside as an alternative.
Thank you Bill I am happy you like it. I have thought about the tree on the inside but I like the the inside shape looks and on this one I would not want to interrupt that.
I gave one just like this one but made of Oak to a good friend of ours. We placed it on her tree with a light behind and I really liked how that looked. It really lit up the inside.
I do have one planned with something inside that will not be a Christmas ornament though and will do it the future.
Thanks for watching,
Gary
Very, very nice! I like your tailstock support idea. Clever!
Thank you Stuart. The tail stock trick came from the point I thought now what am I going to do.
Worked even better when I made one for a friend the next day.
Thanks for watching and commenting.
Gary
Amazing woodwork! Thanks for sharing!
Thank you very much Torben and thanks for watching.
Gary
Always great to learn from you Gary - thanks for sharing. Stay Safe my friend - Dennis
Thank you Dennis and thanks for watching,
Gary
An inspirational project! I can't wait to try and make one for myself. A great finish on the project too.
Thank you Duncan, happy you liked it. Best of luck when you try it.
Thanks for watching,
Gary
What a beautiful piece, definitely must try doing it. I couldn’t get over how you began it, just taping the pieces and then rounding off.Learnt something new today and any day you can do that is a good day. Thanks for showing it and continue your good work . Sean
Thank you Sean happy you liked it. I always say I try to learn something new every chance I get.
Gary
A two year old video but still worth watching. Nicely done Gary. Thank you for sharing. Have a great day and stay healthy.
Thank you Glen and as I recall it was the first inside out ornament I had turned.
Thanks for watching,
Gary
The finish really brought out the darkness of the walnut. Another beautiful piece.
Thank you John and this one hangs all year long.
Thanks for watching,
Gary
I love these! I can’t wait to try turning one…or some!
Thanks Mike. Once you do one it gets pretty easy.
Thanks for watching.
Gary
Merry Christmas Gary. Wishing you and yours all the best.
Merry Christmas Rick!
Simply stunning.
Thank you John I am happy you liked it.
Gary
Absolutely out of this world work!!!! FANTASTIC!!
Wow, thank you! I appreciate your comment Jim and thanks for watching.
Take care,
Gary
Awesome Gary
Thanks
Glad you enjoyed it Stan!
Gary
I love these. They would be really prety with mixed wood, too.
Thank you and I have thought about that and a few other ideas.
Perhaps we will have a Christmas in July.
Gary
That was absolutely stunning!
Thank you very much Edith happy you liked it
Gary!
That is a super beautiful piece of craftsmanship. Thank you for sharing the process.
Thank you very much Guy I am glad you liked it.
Great idea putting tape on the tool rest to show the boundaries. 👍🏻
Thank you it does help for sure.
Happy you liked it.
Gary
Great demonstration and explanation! Thank you. 😁
Thanks you James, glad you liked it.
Gary
Absolutely stunning.💜💜💜
Thank you very much J'Lyssa happy you liked it.
Gary
This really is a stunning piece. Well done, take care and stay safe.
Thank you very much Deborah glad you like it.
Thanks for watching.
Take care,
Gary
Super!!!
Thank you! Cheers!
Beautiful. I love walnut, as you know. Thanks.
Thank you John and yes I remember you do like walnut. Good thing as I have another piece coming up made from Walnut.
Gary
The Papa questo lavoro è uno spettacolo, Buone Feste amico mio. Io sono Roberto 1947, grazie per aver condiviso questo lavoro.
Roberto 1947 grazie mille per le tue gentilissime parole.
Abbi cura di te e grazie per la visione,
Gary
What a neat method and beautiful result.
Thank you
Sweet I love walnut it finishes so nice
Thank you Richard. Yes the grain of Walnut is really great for all finishes.
Take care,
Gary
Great looking Ornament Gary and masterfully turned do you skills know no bounds
Thank you Steven I appreciate your kind comments. I do enjoy all types of turning. My mind has a few really odd tbings churning around. Going to take awhile to get them out.
Thanks for watching
Gary
Excellent work Gary!! Beautiful!!
Thank you very much Gregory! I appreciate you watching and commenting.
Gary
Great job Gary. Best wishes to you and your family through this holiday season.
Thank you Dave and Merry Christmas to you and yours as well.
Gary
Awesome craftsmanship. Beautiful piece of work. 👍🇺🇸
Thank you very much Geno and thanks for watching,
Gary
Absolutely lovely.
Thank you so much Gloria!
Take care,
Gary
Thank You Gary...Nice turning...Beautiful job...Stay WARM & happy holidays....TM
Thank you very much tuffy I am happy you like it.
I will try and stay warm but its back out to the shop to work on a few projects...
Merry Christmas my friend,
Gary
I really love this. I’m just beginning but one day I would love to do this. Thank you
Thank you Judith, I am sure one day you will make one. I made a video that might help someone doing their very first one. Best of luck,
Gary
That's so cool! Beautiful! Nice work!
Thank you very much! Happy you like it Scott.
Take care,
Gary
Its beautiful. I'm going to try and make some for the tree .
Thank you Sue and have fun making them.
Gary
That is so cool! I love this.💕
Thank you very much Dianna.
Thank you sir I enjoyed your video. Keep on turnin.👍
Thank you Shawn and I plan on it.
Gary
Hi Gary
I know what I’m going to turn tomorrow,thanks for showing in great detail how to do that method of inside out turning.
Regards from nz
Thank you Mal and have fun.
Gary
That is a great idea! Thanks for sharing!
Thank you Jeff and thanks for watching.
Gary