Restore Sea-Doo Plastics Better Than Factory: The Watercraft Journal Ep.89
Вставка
- Опубліковано 29 тра 2021
- See how you can save your sun-faded, discolored or even gasoline-stained Sea-Doo plastics with this incredibly easy-to-follow process. We go into greater detail in this tutorial HERE: watercraftjournal.com/gallery...
And please subscribe to our UA-cam channel!
You can also follow us HERE:
Facebook: / thewatercraftjournal
Instagram: / pwcjournal
Twitter: / pwcjournal
And please visit our sponsors' websites:
Sea-Doo: www.sea-doo.com/
Slippery: slipperywetsuits.com/
Windrider: windrider.com/
GoPro: shop.gopro.com/
#pwcjournal #seadoo #rxpx
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Thank you Kevin for putting in the time to figure this out. I too had the unfortunate experience with my sure-can while attending the Mudbug rally and had a spill on the plastic. Your cocktail worked like a charm. This morning my 2020 GTX 230 has taken a huge step back towards looking brand new. Thank you very much for this insight and for putting in the time and effort!
Thank you for the info. I appreciate your hard work researching and experimenting with these products.
Thanks Kevin for doing all the legwork to see what works. I myself am very particular about the condition of my Skis and the black on my TX at the bow is hard to keep the finish perfect. I’ll try these
Looks awesome!
Thank you. I appreciate your channel a lot.
Great video!
Thanks Kevin!
Nice video. The Meguiars ultimate polish and wax works well on them as well. I Did it on a lava red rxtx300 that is not well taken care of and in salt water all the time. I will have to say, Seadoo shiny plastics and finishes are better than my Yamaha GP1800R. I am constantly detailing mine and his ski cleans up well with a lot less upkeep.
Wool pad with cut grit.....then final with foam pad and light grit fine scratch remover.....never use wool on final applications, it’s too coarse. Only foam on polishing to achieve best luster. Also buy multiple pads for specific grits and stick to that grit for that individual pad (wool or foam). Lastly, use higher speed, extreme light pressure (very important, don’t burn surface) and extra fine polish for final polishing, then wipe with microfiber cloth when done. Extra tip: if like in the video, your doing a specific piece, cover the surrounding area with cheap plastic painters plastic to mask area from compound/wool fibers that gets thrown everywhere during buffing phase, don’t make extra work for yourself.
Kevin, have you heard of the 2021 GTR plastics cracking? I noticed hairline cracks in the foot wells on the left side when I pulled the ski out of the garage to clean it. I use maguires and 303 plastic and vinyl restore to clean and wipe down my ski and it stays in the garage when not in use. Not sure how these cracks happened but I did not have them last year.
This works AMAZING!!! MY SKI LOOKS BETTER THEN NEW!!
Kevin,
Any links/suggestions on where to get the blue and wool pad setup as used in the video? Thanks!
Looks great! What do you recommend for water spots those drive me crazy!
Good informative vid, well done WCJ, I been detailing for 10 years as a hobby on Cars, bikes, PWC and meguiars products are excellent for a product available to the everyday consumer...
Hi ya Kevin cheers for the amazing channel. Would this system work on 2021 Yamaha SVHO plastics as well as nano cell 2?
Kevin, any advice on the textured black plastic which turns gray over time? Most products restore to black UNTIL they get wet, then look worse than ever.
Have you tried Maxima SC1 "new bike in a can" silicone spray? Brings plastic to better than showroom shine.
After all this is done, don't you still have to apply some kind of wax with UV protection? If so, what do most people recommend?
Thank you for the info - I had 93 gasoline spill on the mirror and hood trim the yellow part and it’s just ate all the color I have the same ski and year , do you think it will be ok to use it