Power Carving & Laser Cutting a Wooden Sign
Вставка
- Опубліковано 30 жов 2021
- I power carved a huge sign out of white oak and walnut and laser cut the logos and text. I used various #woodworking machines to accomplish this look. I first milled up the wood by using a jointer and planer. I then ripped everything down on my table saw before doing 4 separate glue ups. I then used my track saw to cut the white oak and inlay some walnut. Once the sign was all dry, I traced out my design and used my new favorite power carving tools, the Arbortech turbo plane and contour sander. I then got to use the Nasum A5 Pro 40W #laser to cut 1/4" walnut. The laser is a fantastic new upgrade to the workshop. I finished everything off with some odies oil. Watch this entire build from start to finish! #sign.
Want to Commission a one-of-a-kind sculpture like this? Email me at bmsculptures@gmail.com
Follow me on:
Instagram: @Bmsculptures
bmsculpture...
Facebook Page: @blakemcfarlandsculptures
/ blakemcfarlandsculptures
Website: www.blakemcfarland.com/
Tools/Products used
GET 40% off the NASUM A5 Pro. Use Code 'Blake554' at checkout. Valid through 11/7/21
USA: amzn.to/3bqZVjU
France: amzn.to/3ECxaxv
Italy: amzn.to/3q2BQZc
Spain: amzn.to/3Ezt1KI
Arbortech Turbo Plane- amzn.to/3vYWzyj
Arbortech Contour Sander- amzn.to/3mwaoRO
Arbortech Powercarving package- amzn.to/316VpVU
TrackSaw- amzn.to/3GF4pBS
Kutzall die grinder bit- amzn.to/2ZJMWHZ
Face shield- amzn.to/3CbW9XT
die grinder- amzn.to/3xqiOMB
Wood Finish- amzn.to/3xmPTcc
Harvey Tablesaw & Bandsaw
Tablesaw- www.harveywoodworking.com/pro...
Bandsaw- www.harveywoodworking.com/pro...
Compas Miter Gauge- www.harveywoodworking.com/pro...
My Camera- amzn.to/2Lq0MED
Camera Mic- amzn.to/2LtpZ13 - Навчання та стиль
Blake:"I’ve never done anything like this before"
Also Blake: does a perfect job 👌
This is literally one of the most underrated sculpturing channels I’ve ever seen. It’s crazy how 96% of people don’t subscribe, don’t let that demotivate you though. I would be surprised if you don’t have a video that goes viral. Amazing build today!
Thank you so much! I appreciate it!
@@BMSculptures Of course :)
J
Great build! I’m really getting into some power carving too. I love it! Love that laser and everything about it: easy to assemble, easy to use and the cost! Thanks and can’t wait to see the next one👍🏼
Awesome, its a lot of fun! thank you!
Blake, I’d be extremely proud to have my business advertised and identified by such incredible artwork and pure talent!!! Great job‼️‼️‼️
This design is awesome!
Absolutely beautiful!
Fantastic Work Blake, you're an inspiration. Look forward to more of your video's
This sign is more then amazing. And I subscribed after watching your first video. Wood working, building houses, & wood turning are things I watch rather than the junk on tv. Thanks for sharing your work.
Masterpiece. Love from india. 🥰🥰🥰🥰🥰🥰🥰🥰🥰
Beautiful work !
Very talented. Love watching these videos. Thank you.🌟🌟🌟🌟🌟🌟
absolutely stunning!
Beautiful!
Wow! Great job Blake you verry good!
Beautiful sign!
Awesome work as always Blake, the contours of the carving looks amazing. A well executed build. Top respect from the UK 🇬🇧. Oh and just one other thing but this to all who watch, hit that subscribe button it doesn't cost anything. Cheers Blake
Thank you so much 😀
Wow this is next level woodwork. It’s great
Your Work Is Outstanding!
Gorgeous use on textures
That's truly awesome!
Beautiful work! The instrument is lovely!
Thank you very much!
Gorgeous
gorgeous!!
great looking sign
Wow. Mind blown. Absolutely beautiful work!!
Thank you so much 😀
It looks awesome.
WOOOOW! What an insperations!!
Amazing work 👏🏽👏🏽👏🏽
Love the contrasting colour of the two woods. I like how it's carved to to look like a soft rippled fabric type look awsome. I subbed after seeing 1 vid. The rhino then binged watched all them. Awesome talent an thanks for sharing. 🇬🇧
Beautiful
Another awesome piece. You are very talented
looks amazing!
This is gorgeous
congratulations congratulations... Human talent versus CNC. Congratulations from the heart....
Another beautiful build, I loved it! And that looks a really great laser!
Thanks Jolien. I am loving the laser.
I subscribed, it was quite easy, I pressed my fingy on date button. Y'all should try it. Lol. This guy is awesome.
Beautiful ❤❤
How are you people not subscribed? It doesn't cost anything!! Hit the button already, help the guy out. I love watching your videos Blake, big fan.
Great job
stunning
Amazing!!!
Wow you are an amazing artist ❤️!
Cool, very innovative
Hi, new to the channel, thank you big thumbs up on a job well done. Blessed be.♥️♥️♥️
Another beautiful build, love watching your channel. God Bless.
Thank you so much!
Maravilloso,!!! Esculturas dignas de admirar y contemplar cada segundo. Felicitaciones por lo que hacen con tanto esmero y corazón ♥️!!! Sería lindo poder admirar y contemplar tus obras de arte presencial ojalá tenga la opción algún día. Saludos y Éxito desde 🇨🇱
Awesome💖💖
you had me at body sculpture. found it in my recommended videos out of the blue. If you make another piece, i'd be interested in what sort of wood carving you do next. Maybe something robotic or scifi themed like an alien.
So amazing.
nice vidéo man thx for share
GORGEOUS
Thank you so much!
Nice Wall Emblem. ;- )
Very nice Work !!
YOU’RE TALENT IS ASTOUNDING!
Looks awesome!. Keep it going!
Good Work , congratrulation .
Bravo l'artiste 👍
As for the plywood inlay, better safe than sorry! Lovely work, as always!
Great video. From a woodworker, just a tip, especially if you’re ripping to smaller pieces. Rip to slightly larger than finished width (+1/4”), then run 1 face on jointer, then plane to thickness (jointed face down), then run edge on jointer and rip on table saw. This will get you truly square pieces that are also flat. Thanks again!
Nah that’s over kill
You are an artist 👌
My new favorite channel.
Great job Blake!! don’t think that the editing has gone unrecognized, i love watching you evolve not just as a maker but as a content creator. Nice job buddy 👏👏
haha I did switch this video up on ya a bit! You like the music added in vs voiceover the entire video?
@@BMSculptures it was honestly a nice change! i liked it.
@@HomerJade Good to know!
Vary artistic design.
!!!!!!!!👍🏻👍🏻👍🏻👍🏻👍🏻
this is why internet is literally invented to watch this amazing sculptures made ❤❤😊🎉
Awesome Awesome Awesome.
❤ true talent - well done mate
Fantastic!
Glad you like it!
Wow awesome work man! Love it!
what can i say awesome
Fan-effing-tastic!!! Amazing!
Thanks Robert
I love ❤️ this channel
Blake... You are doing amazing things...
I appreciate that!
Nice job buddy
Wow Blake what not to like. Fantastic. Tim
Thanks Tim!
A little late to this video but coincidently I am in the market for a budget friendly laser etcher and now I have an idea of what to expect. Cheers brother, awesome work.
Wow amazing .
You my friend, got a new subscriber. Awesome channel! Great work, amazing sculptures.
awesome video! glad to see it as soon as it came out.
wahoo, Thanks!
You are a true artist. It is always exciting to see what you come up with. The best thing is you use different materials and tools to make something different every time. I love your channel.
Thank you so much Tracy! I would get bored doing the same thing over and over. 😂
@@BMSculptures My uncle makes signs out of high density foam. They are all different but all out of foam. When he gets bored, he uses different substrates like glass and wood etc.
Better to be safe than sorry. I think the plywood reinforcing was a good idea. All,it takes is 1 thing happening and you know how word of mouth works. Everyone should know by now how awesome your stuff is!
MUCH LOVE BROTHER
First off, fantastic spectacular work my man, your talent goes far beyond what I’ve seen. This isn’t something you learn.You were born with it.
PS. Personally I prefer the narration to anything else.
Don't know how I'm just now seeing this one - I'm looking around for some inspo for what I should turn this big log into. I usually do additive sculpting this will be my first try at reductive sculpting. great work as always dude glad to see you succeeding
I think that turned out fantastic! I love the Walnut vertical pieces on it. 40% off sounds like an amazing deal, and seriously will be considering it this week. Just noticed you doubled in subscribers recently too. Way to go!
Thanks Gary! If you have any questions about the laser give me a call. I would be happy to go over everything with you.
So nice
Thanks!
One thing I'm watching you as well is you less talking you really know that this make us or maybe only me hehe for relaxing cause others are too much talking annoying 😂❤
Goooood.Thank you
Welcome 😊
I like the music choice! But I don’t care what people say I think your commentary is great too. I follow a lot of pages like yours and everyone complains about makers talking too much but people like me like to know the details about what you’re doing. Keep it up your content is awesome!
outstanding
Great job. Vary creative.
Thank you so much 😀
Superb😊😊
really nice dude, love your work
Glad you enjoy it!
That looks frickin amazing man!!! I've been wanting to do a project like that myself, but that Arbor Tech stuff is expensive. Anyhow well done sir, I'd be proud to hang that on my wall....
laser cutting is a nice touch
It will be a huge addition to the shop!
Very interesting and fun design. I was concerned that the background carving would overpower the lettering. It ended up very well done the sign lettering was great.
wicked very different project like it
Thank you!
Looks great 👍👍👍
Thanks!
That glue up would have made a beautiful table top too.
Looks great!! Beautiful sign!!!!
Enjoyed your video and I gave it a Thumbs Up
Thank you very much!
Better safe than sorry.. Sweet sign 👍
absolutely. Thank you Adrienne!
У вас золотые руки. Талант у вас от Бога