Dude! You’re a life saver! This fixed my problem! I did the same as you, I assumed my rod was bad, ordered TWO (assuming they go bad after time). It’s been a year since I’ve used my press. I decided today I would try to fix it again, no luck. A couple of minutes into your video? My problems solved! I can’t thank you enough! God bless you sir!
Hey J.B i just heard that Lee has moved the loadmaster into "Legacy Status" . They said they can no long afford to support the load master. kind of sucks just a bit.
Thanks. I have had my loadmaster for a couple of months when this issue just reared it’s ugly head. I have been looking at everything on the press trying to get this working. I thought it was the primer feed which I have stopped using and removed. Hehe… instructions… um. Hehe 🤦♂️ Thanks for the video simple easy to follow.
Looking at your video is exactly the problem I have, just vague where the bolt your talking about loosening the shot doesn’t show where to go to find it. I feel your talking about the 7/16 bolt at the bottom in the middle of the Ram though it doesn’t Seem to Respond as You indicated
Great video Jesse. While I have the turret press I know there will be a lot of progressive press owners happy with your video. I have read these presses work fine you just might have to tinker with it some. 😀😀😀
Dude! You’re a life saver! This fixed my problem! I did the same as you, I assumed my rod was bad, ordered TWO (assuming they go bad after time). It’s been a year since I’ve used my press. I decided today I would try to fix it again, no luck. A couple of minutes into your video? My problems solved! I can’t thank you enough! God bless you sir!
Glad it helped and thanks for watching.
a 0$ solution to a million $ problem excellent DIY fix sir.
Thank you 👍🏻🇺🇸
Finally the press is running as it should be
Thank you from Belgium
Glad it helped.
Awesome video, saved a ton of aggravation, wish i would have found this video sooner. Thanks for making it short and to the point!
Glad to help and thanks for watching.
Mine came out of the box with that problem, and a few youtube videos later I have the solution. Thank you good sir.
Glad you got it going 👍
Thank you so much for making this video ! It was very helpful for me .
It's been nine years since this video,But his help with me is still so huge, thank you!!!👍
Glad it helped you 👍
Hey J.B i just heard that Lee has moved the loadmaster into "Legacy Status" . They said they can no long afford to support the load master. kind of sucks just a bit.
Thanks for video, got that working .
now wondering how I adjust the powder charge on this contraption
Thanks you just fixed my Loadmaster.. Thanks a Mil and God Bless
Glad to help 👍
Thanks. I have had my loadmaster for a couple of months when this issue just reared it’s ugly head. I have been looking at everything on the press trying to get this working. I thought it was the primer feed which I have stopped using and removed. Hehe… instructions… um. Hehe 🤦♂️
Thanks for the video simple easy to follow.
Glad to help you out. I preprime all my cases before running them on this press. I don’t like the priming system on it.
Thanks a lot, was trying to figure out similar issue for over an hour.
This fixed exactly as shown
Glad to help and thanks for watching.
Thanks for the information. Once I get all the equipment. I might have an idea how to use it.
Just let me know if you need any help.
Got it!!’ Thank you read the manual could not get it!!!
Glad it helped 👍
Perfekt danke für deine Hilfe!!
Looking at your video is exactly the problem I have, just vague where the bolt your talking about loosening the shot doesn’t show where to go to find it.
I feel your talking about the 7/16 bolt at the bottom in the middle of the Ram though it doesn’t
Seem to
Respond as
You indicated
Yep the bolt in the middle of the Ram.
Thx buddy it helped. Happy chootin from 🇨🇦✊
No problem 👊
Thank you, Brother. Your video was a huge help.
Glad it helped and thanks for watching.
I m french and is very utility. Thank you so much
Thanks for watching.
man ive been trying to figure this out all day lol , apricate it man
Thanks for watching.
I bought mine used to thanks for the info
@@plumbcrazy375 thanks for watching.
@jesseboutdoors I have a dumb question how does the primer work
@plumbcrazy375 the priming system is less to be desired on this press. I always primed off press.
OMG! Thank you sir! I foresee piles of 9mm at my feet!
Thank you for your great find
Thanks for watching 👊
Thank you this was my exact problem
Glad to help and thanks for watching.
I’ve decided the best way to fix my loadmaster is to get rid of it and by another Dillon! And I did , always working on it .
Wish I had the money for a Dillon. I only have the loadmaster cause I paid 175 for it.
@@jesseboutdoors I tried to like the load master , but I just couldn’t get it to do what I wanted. Me and my credit card got a Dillon 750.
Thank you Sir!! this helped a lot!!
Glad it helped.
Good to know how to fix them .
Yes it is 👍🏻🇺🇸
Great info. Thanks for the video. 🔥💪👊🇺🇸
Thanks for watching 👍🏻🇺🇸
Well done. 👍
Thank you 👍🏻🇺🇸
Great information buddy and great video
Thank you 👍🏻🇺🇸
Thank you
Thanks for watching.
Should have watched this before I spent a half hour figuring it out too!
Thanks for watching.
great job bud
Thank you 👍🏻🇺🇸
Good info Jesse. Mike
Thank you 👍🏻🇺🇸
Brilliant, thanks for the post, greatly appreciated
Thanks for watching.
Great video Jesse. While I have the turret press I know there will be a lot of progressive press owners happy with your video. I have read these presses work fine you just might have to tinker with it some. 😀😀😀
Yes you have to tinker with them. I’ll never get rid of my Lee turret press.
The most incredible thing is everybody has the same problem with this equipament...
Yep I sold mine. Thanks for watching.
Thank you
Thanks for watching.
Great video, thank you.
Thanks! I also started a reloading channel if you would like to see more. It’s the same channel name with reloading on the end. Thanks for watching.
Thank you.
Thanks for watching.
Not all heros wear capes
Thanks for watching.
thannnnnkssss BooSsSsSsSsSs!!
But now the cases don't align with the dies?????
Then adjust your tool head. Thanks for watching.
Please tell me how?
TKS dude
No problem and thanks for watching.
I have tried this, but mine jams
Put brass in every station with it loose. Make the brass go into the dies then tighten the bolt. That should make it perfect.
speck bang tacular!
Thank you 👍🏻🇺🇸