Great video, after I saw you're video I was motivated to add it to my 2012 taco. You're video was very helpful and I went with the same set up, happy so far with the end result.
Thanks for the heads up! It doesn’t look like it shows up there anymore. Here’s a replacement link: www.amazon.com/gp/product/B00ZF21ACK/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00ZF21ACK&linkCode=as2&tag=braxen-20&linkId=f7f3c46a9c4121a20e98da9f9e689657 I’ll update it in the description as well. Thanks again!
Hmm good question... I never have mine on, but I’d probably just screw it onto the lower bumper without the license plate cover. Or zip tie it to the grill area below the light bar if I didn’t want to put screws into the lower bumper.
yo dude, over the month you've had this hidden bar, how is it holding up? does it still work etc. because i plan to get one for my tacoma but i want to know how well this brand (auxbeam) is. and did you put silicone around the edges to make it water proof
Yeah it does still work, I haven't had any issues with it. I read on the reviews about some of them letting water in but I haven't had any issues with that so far. I didn't use any silicone either, I just figured I would throw it on and then if it started to get water in, I would pull it off and then seal it. I have been through the car wash probably 3-4 times with it too, so far so good.
Still holding up really well. No leaks, fogging, or oxidation. I ran it through a car was a couple time when I first got it to make sure there were no leaks, and it’s been good since. The mounting location keeps it semi protected too, I think that’s helped.
I also have auxbeam lightbars, even if one of their light bars does fog up, they will send you a new one. Happened to me, and I got to keep the original
You mean the grill in front of where the light bar is in the video? You’d have to cut the small grill area out and get different mounting brackets that would bring the bar further forward. A lot of people will do it that way, I just didn’t want to cut the black grill area out.
I actually made it! So the black mesh and lettering came from a company called BPFabrications, but it doesn’t come installed because on the second gen Tacomas you have to do some cutting. If you look a little further back, you’ll find the videos I made detailing how I made it and installed the amber led lights!
I think amazon has some, just not the exact ones I put on. If you want the ones I put on, they are from Rago Fabrication, just google them and you can get the mounts from their website!
Soooo, $70 for metal brackets when the light bar is $90. $70, for simple metal brackets. Bent metal with a couple holes drilled out. Hmmmm, no thanks. I’ll get a bull bar with an LED if I am spending near $200.
Whatever suits you man. I wanted the light bar where it’s at, and that’s what it took to put it there. There are probably cheaper brackets, but I wanted solid ones that wouldn’t vibrate because I plan to upgrade the light bar to a better one down the road. It all just depends on where you want the light placed. The bull bars look good, just not what I wanted for mine.
Thanks for the video, this is the only video I could find that actually illustrated where the brackets bolt on to.
Great video, after I saw you're video I was motivated to add it to my 2012 taco. You're video was very helpful and I went with the same set up, happy so far with the end result.
Hell yeah! Thanks man! I’m glad it helped!
Thanks for the info 😊
Damn, I got to definitely do this to my truck!
I got the these Aux Beams for over 2 years now in the same place but with a flush mount, has not leaked yet unlike this other brand I bought.
Nice! Mine have been great so far too, no leaks or anything!
Link says "32 inch", but Amazon product is actually a 22 inch LED bar.
Thanks for the heads up! It doesn’t look like it shows up there anymore. Here’s a replacement link: www.amazon.com/gp/product/B00ZF21ACK/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00ZF21ACK&linkCode=as2&tag=braxen-20&linkId=f7f3c46a9c4121a20e98da9f9e689657
I’ll update it in the description as well. Thanks again!
Wondering where a good alternate front license plate location would be so it doesn’t block the light bar
Hmm good question... I never have mine on, but I’d probably just screw it onto the lower bumper without the license plate cover. Or zip tie it to the grill area below the light bar if I didn’t want to put screws into the lower bumper.
Do they have brackets for a 2014 Tacoma?
Hey, what is the part number on those brackets? Can’t find them on the Auxbeam site.
The brackets are by Rago Fabrication, just the light bar is by Auxbeam
Good video man!!! So hey what if I have different brackets? Not like the ones you used
They should work fine, I don’t know why they wouldn’t work haha
Alright I’ll give it a try👍
yo dude, over the month you've had this hidden bar, how is it holding up? does it still work etc. because i plan to get one for my tacoma but i want to know how well this brand (auxbeam) is. and did you put silicone around the edges to make it water proof
Yeah it does still work, I haven't had any issues with it. I read on the reviews about some of them letting water in but I haven't had any issues with that so far. I didn't use any silicone either, I just figured I would throw it on and then if it started to get water in, I would pull it off and then seal it. I have been through the car wash probably 3-4 times with it too, so far so good.
Any updates on how the lightbar is holding up after almost a year? Any fogging/moisture buildup in the lightbar yet?
Still holding up really well. No leaks, fogging, or oxidation. I ran it through a car was a couple time when I first got it to make sure there were no leaks, and it’s been good since. The mounting location keeps it semi protected too, I think that’s helped.
I also have auxbeam lightbars, even if one of their light bars does fog up, they will send you a new one. Happened to me, and I got to keep the original
how did u get the switch in your dash like that?
ua-cam.com/video/PBu_ZyFGk14/v-deo.html
:)
I have the same setup as you but my light beam is shooting left any solutions?
Very informative video! Do you know how to remove the small grill and place the light bar instead of the grill?
You mean the grill in front of where the light bar is in the video? You’d have to cut the small grill area out and get different mounting brackets that would bring the bar further forward. A lot of people will do it that way, I just didn’t want to cut the black grill area out.
So you put the straight light bar in do you thing a 32” curved light bar will fit as well ?
I believe so, I think it measures 32” total, so al long as the total length is about 32”, you’ll probably be fine
Where did you get the bracket
I had that harness, it drained my battery.. anyone know what hot fuse to use with a add a fuse,so it's off when the truck is off???
Hey man! Where did you get the grill?
I actually made it! So the black mesh and lettering came from a company called BPFabrications, but it doesn’t come installed because on the second gen Tacomas you have to do some cutting. If you look a little further back, you’ll find the videos I made detailing how I made it and installed the amber led lights!
you think mounts for a 30in lightbar will work for a 32in lightbar?
The red light on the button is always on or only when the ignition on? Thanks!
The red light on the switch that comes with the wiring harness is always on.
@@BraxenMcConnell Thanks a lot)
@@BraxenMcConnell will it drain my battery if my car is not on?
Where do u then put your front license plate?
I don’t 😊 I’ve never been pulled over for it haha it’s just sitting under my front seat
Why ruin it with a front plate?
Will this fit a 2014?
Does anyone know if this will fit a 2013
Where did you get your front grill with the lettering?
Something must have changed with either auxbeam or caliraised, the bolts from auxbeam are way too long and the bolts from caliraised are too skinny.
Question i need those brackets and amazon doesnt sell them any ideas?
I think amazon has some, just not the exact ones I put on. If you want the ones I put on, they are from Rago Fabrication, just google them and you can get the mounts from their website!
Cali Raised website has them.
amazon.com/dp/B077T8J9SS
Bro can you get me the link for the bracket mine a 2014 tacoma
Same. Did you ever find a link?
I can’t find any brackets for my 2013, anyone have a link???
Check Amazon, theres generic brackets you can buy
What grille is that
Can you cut plastic in front of the light bar?
Soooo, $70 for metal brackets when the light bar is $90. $70, for simple metal brackets. Bent metal with a couple holes drilled out. Hmmmm, no thanks. I’ll get a bull bar with an LED if I am spending near $200.
Whatever suits you man. I wanted the light bar where it’s at, and that’s what it took to put it there. There are probably cheaper brackets, but I wanted solid ones that wouldn’t vibrate because I plan to upgrade the light bar to a better one down the road. It all just depends on where you want the light placed. The bull bars look good, just not what I wanted for mine.
When you mean they sponsored you, does that mean they bought it for you or you bought it and then said they sponsored you?
They gave me the light bar in exchange for the video
@@BraxenMcConnell sweet deal