Samsung Dryer Replacing Belt Idler Pulley Step by Step instructions
Вставка
- Опубліковано 5 жов 2024
- How to replace a Samsung Dryer Idler pulley. Dryer will not spin or heat when the pulley is bad and or the belt has slipped off.
Samsung has a new Dryer Idler Pulley Assembly that has a ball bearing DC93-00634A AP6038887 PS11771601
Thank you Bruce Westergaard for the update on Samsung new pulley.
rover.ebay.com...
If you have not done so already please Subscribe and hit like on the video.
Hi I would like to thank you for the time and effort for making this video that was precise and accurate.
I was able to complete the entire task of replacing the idler pulley in our dryer.
It is people like YOU that have this knowledge to share with us that makes me proud of the generation that uses social media to empower others in an informative and helpful manner.
FYI I was in a panic mode after not having a dryer for approximately a week and then getting the courage to do this as a mom of a household with no one else available to do this task in a timely manner.
Thank You! We should all let Samsung know that this part should of never passed quality control when manufacturing these dryers and that all owners should be compensated for the replacement of the idler pulley.
Thank you! This is the 3rd video I have watched and no one showed how to feed the belt or how it is supposed to be set up. THANK You!
Thanks so much for sharing your video. I disassembled according to your instructions, received the parts yesterday, installed and reassembled without issues. Very well done.
I just had my similar model apart today. (There are many different models that are very similar mechanically..) Many of the rotating parts in dryers are designed to work without grease or tacky/liquid lubricants. Petroleum based lubricants are not the best idea in devices that intentionally develop high heat.. "fire bad!"
One of my 4 drum rollers (wheels that look like roller-blade wheels) was binding up a bit and causing a vibration (that went away when I tipped the entire machine forward or back while running), and I sprayed some graphite lubricant on all the shafts, along with cleaning all the lint and loose change and other crap that made it's way past all the filters and such over the past 5 years.
Watched your video to double check all the screws I took out and make sure I didn't forget something while reassembling it.
Good job editing and picking music that wasn't obnoxious.
Thank you! I just used your video to help me fix my dryer!
Nice job! The camera angles from the inside were important to see! thanks!
HA! The best instruction on how to SAVE some big money! Exactly what was wrong and exactly how to fix it...and it cost me exactly $11.80! Part bought on AMAZON Prime.It was at my door the next day. So grateful for this video! Thank you!
This video was SO helpful! I have a samsung dv45h7000ew/a2. It started making an irritating squealing sound which changed to a grinding sound. After watching the video I purchased a new belt and idler pulley. I installed them and the dryer is working better then new. The whole thing took me 2 hours.
Thank you so much. This video helped me step by step to replace the pulley and the belt. Seriously, thank you for such a helpful video.
Thank you for making this great instructional video my friend, you are a gentleman and a scholar. Had I not found your video, I would not have been able to fix my 2 year old dryer for $10
Thank thank thank you!!! None of the other videos showed this exact model! I really appreciate you making this video! It was so easy to fix!
could you please let me know your email, I wanna be cooperative partner with you! here is my email:debbieyanjia@gmail.com
Thank you for such an easy to follow video. Finished the job in 30 minutes for less than $20. I actually found an idler pulley with a ball bearing collar, so no more plastic spinning on the metal collar. Hopefully that will stop it from melting. Stupid design of a part. But your video was top notch.
You're awesome man. Took everything apart and found a rag stuck in my pulley stopping it from spinning.
Thank you! I followed this video and fixed it myself! Excellent clear instruction. Really appreciate this!
Hey man! Thanks for this video! I have the same model and problem.! Absolutely perfect step taking. Saved myself a lot of money doing it myself. I found the idler pulley for $30
Thanks for instructions, appreciate it! Just took my parent's dryer apart to replace the belt and greased it. Whisper quiet!
If you have not done so already please Subscribe and hit like on the video.
Brandon, thanks for this video. It was helpful in a visually clear, detailed, step by step, easy to follow way. I have a MultiSteam/ VentSensor model, and went through the front like you did. Thanks again!
If you have not done so already please Subscribe and hit like on the video.
Thank you so much for this video! Saved us a call to the repairman!
If you have not done so already please Subscribe and hit like on the video.
This was perfect! The job went much faster than I expected...just less than an hour. Probably would have been quicker if I had a better internet connection cause the video paused several times ;)
Great video, thanks for posting it. Like a lot of the commenters below, I had also heard you could replace the tensioner by going through the vent panel, but honestly, I cant see what I'm doing through there. This might take longer, but I was able to do it right, to my satisfaction. I don't think I could have done this without your video. Thanks again!
This is exactly what went wrong with mine. Fantastic video! I don't know a thing about how the dryer works, and now I do.... not to mention, I fixed it myself. Thank you very much!
If you have not done so already please Subscribe and hit like on the video.
how long did it take you to fix it???
Thanks dude👍 You saved me having to get a repairman.
Thanks for the video. I would not have been able to replace mine without your guidance. Just figuring out which panels to remove to access the components would have tripped me up. How the belt went on would have been another difficult point.
A great video. Only comment I have is the top assembly does not need to come completely off. Just prop it up with a screw driver. This lowers the chance of accidently damaging the wiring harness connection or not hooking it up right again. Also the updated idler pulley system had a sealed roller bearing. It should last a lot longer than the original steel on steel setup. Thanks for your help! I greatly helped my process.
Bruce Westergaard thank you for the updates greatly appreciated!
Thank you so much! I just fixed my own dryer for $20.
If you have not done so already please Subscribe and hit like on the video.
Very informative, thanks really helped me be prepared. I bought the kit on amazon and replaced rollers and belt at the same time.
If you have not done so already please Subscribe and hit like on the video.
This video was great it saved me tons of time and wasted energy thanks so much your machine was the same as mine very easy to follow
Excellent video, thank you! Worked for my DV52J8700E model. I was able to pivot the top and prop it diagonally behind the dryer to save disconnecting all the individual connectors in the control box.
Thank you, your video saved me a ton of money and time.
Thanks for helping me fix my dryer
Thanks, that was a big help, got my first load drying and have extra screws.
makes me nervous that you ended up with extra screws :D
thank you much .took a little longer than you . lol. and 2 hands but without this video i would have had a very hard time.thanks again....
Thanks for the video and step by step directions. Much appreciated.
Thank you much. Exact fix my dryer, replacement purchased on Amazon LFORBB' store.
Thank you for your sharing, you save me money.
Thanks a million. This is very helpful.
I’m saving this video. I just replaced the heating coil I’m sure the pulley is next. Thanks
Thanks for this. We just had pulley replaced 3 weeks ago and he said it is bad again, which makes no sense to me. I do not know whether to believe parts are bad or their work is bad. I will replace it myself next time.
How much were you charged to replace the pulley?
Saved me 250$ usd, thanks for sharing!
If you have not done so already please Subscribe and hit like on the video.
Thanks, this video saved me a trip to the appliance store!!!
Awesome video! Very detailed saved me lots of time, money!!
I lubed 4 drum wheel also(great video) cleaned lots of lint
I could not identify the type of lube for the pulley system. Is the same type of for both? If so, what is it and where can I get it?
My newer Samsung dryer is like yours that has to be all completely pulled apart.
Earlier models had an easy access door for a 5 ? minute fix.
No way was I going to take the whole thing apart, so I took out the exhaust pipe, took my electric saw and made my own back door for the dryer, and easy-peasy, was able to replace the complete tension arm ($10 on ebay) .
It is the most common item to fail on the Samsung dryers.
Great money for repair guys charging $100 & up to come to your house.
Denver Flipperer these don't have to be pulled apart. Just remove the vent pipe and panel in the back of the dryer. This gives you perfect access to change the police system, and even replace a few other parts like the filter sensors.
Video totally saved my life. Thanks man
Thank you! Saved me a bunch of time and a couple hundred $$$$
Dude, you are the man. Same exact issue. Thank You!
If you have not done so already please Subscribe and hit like on the video.
Thanks for taking the time to make this video. Helped me out big time! Nice work!
Great video. I have the same model and mine started making noise after about 1.5 years and we do not use it a lot.
What a pain to have to remove all of these parts to get to the idler pulley!!
I was able to go through the dryer vent hole and pull the pulley.
You know Brandon I do not think there was ever any grease on the shaft/pulley. Mine had some rust on the shaft and the metal insert in the pulley, it was just about froze. I took some fine sand paper and removed the rust from the shaft and the pulley insert added grease and it is quieter and better than new.
From start to finish how long did this take you to complete this job?
Once again well none Brandon,
RICHARD GUM about 45 minutes but that's because I video everything.
You are quick with your hands!!
I have the same problem. Samsung isn’t making quality goods any more
Exactly what I needed, thanks
Thanks. Great video. The instrumenta you had playing was banging too
Thanks, appreciate your time
Thank you!
Nice camera angles 👍
Thank you, you did a good job.
thanks man, your a life saver
FYI
If you go thru the back (remove vent pipe) you need to remove exactly one screw and it takes the better part of 10 minutes....
This is a good video. However I don't think you need to pull apart the dryer like that. If you had removed the vent pipe and panel, you would have about a 12 in diameter hole in the back giving you perfect to access to the motor and the pulley system. I just did this on my mine. The whole job took 20 minutes.
Thanks for the tip! I was thinking about this route.
Just did this by removing the vent pipe from the rear. Plenty of room to work. Took me 5 minutes to remove the old pulley assembly by going this route. I think it was just 1 screw holding this in. Once removed, the whole vent/exhaust pipe comes out. Now just waiting for the new pulley to arrive. Be careful of the sharp edges of the sheet metal.
Glad it worked out for you. And yeah those edges are sharp.
I have this exact model dryer only in gas. Yes you can replace the idler this way. However if you take it apart you can clean and grease the drum wheels, and replace the belt. Took me about 1 hour start to finish. Another tip you don't have to remove the top, it is hinged. pop up the front of dryer lid with flat blade screwdriver. lift it up a bit remove the wires from the wire holders and lean it back, saves a BUNCH of time, and headaches. 11 Philips head screws and its apart. I bought a repair kit off Ebay with idler, drum wheels, and belt.
thanks for the video, it really helped out a lot and now my dryer doesn't squeek. sometimes my poop would dry out in the dryer and look like some jerky. it's nice to see that I can start making my jerky poo again.
Thanks for the Video- Took mine apart last night and changed the pulley out and it works great.... When there isn't a items in the dryer. When it has any weight on it it makes a loud, high pitched humming noise. Any thoughts?
Breck Wagstaff It may be the rollers on the drums. I greased all of the bearings on the rollers after doing that mine has been super quiet.
Excellent video, thanks. I am wondering about lubrication. Is that necessary? And is it just that one piece you lubricate? Like, the rollers don't need any?
You can lubricate the. If you want it would help make it more quiet. That being said since this video there has been a new pull released that has a bearing in it. I would recommend getting the new one. The link is in the video description on were to purchase.
www.ebay.com/itm/Dryer-Idler-Pulley-Assembly-for-Samsung-DC93-00634A-AP6038887-PS11771601/152640491528?_mwBanner=1&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F0%2F0%2F0%3Fmpre%3Dhttps%253A%252F%252Fwww.ebay.com%252Fulk%252Fitm%252F152640491528%26rvr_id%3D0%26rvr_ts%3Dc35197501740aa6633659543fffe04b2&ul_noapp=true&pageci=07ae2cec-da5d-4439-8032-19ecc9d1c2f6&epid=13006261417
Don't forget to like and subscribe please
@@GrayHairedDad brilliant, thanks for the video and the response
Just wanted to say that I completed my repair today. Thanks again for your video. I saved myself a lot of money for a repairman or a new dryer. Kudos.
Thanks bro. Helped a shit ton!!
If you have not done so already please Subscribe and hit like on the video.
I have a dryer like yours, mine is making a squeaking sound do you think it's from the belt or the idler pulley
It's most likely the pulley. When I pulled mine off it had no greece left on it and it was squeaking so loud. It's only a year old. I would pull it apart and greece it up. I would ordered the pully off eBay if it needs replaced. My dryer is still working like new after I replaced it and it's extremely quiet I all so greece all the wheels bearings that spin the barrel to.
Thanks!! Big help!!
I'm planning on just replacing the pulley wheel and leaving the arm. Am I making a mistake. I can lube it up as shown.
You will burn through your belt after the grease dries up. They have a new replacement that has high heat bearings it's $14. I put the information in the description. I went in a few months after this video and replaced it with the bearing and have had no issues since. Samsung Dryer Idler Pulley Assembly (ERDC93-00634A
www.ebay.com/itm/Dryer-Idler-Pulley-Assembly-for-Samsung-DC93-00634A-AP6038887-PS11771601/152640491528?_mwBanner=1&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F0%2F0%2F0%3Fmpre%3Dhttps%253A%252F%252Fwww.ebay.com%252Fulk%252Fitm%252F152640491528%26rvr_id%3D0%26rvr_ts%3D0e0e759116a0aa47dd770bf2ffd38b08&ul_noapp=true&pageci=3106e8a7-fca0-47ae-8510-12c0a2522ff0&epid=13006261417
@@GrayHairedDad Thanks, I have a slightly different system in that there are no moving parts on the arm, just a fixed axle. It's a Kenmore 110 model. The only moving parts are on the pulley except the entire arm moves on a spring.
How long did this take you?
Great video, nice music. I was wondering if you have the part number for that assembly? Thanks.
jonbravo2011 rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F152640491528
thank you sir
I just went to the back panel to replace the idler pulley
Cool vid but you don't have to take the whole top off.You use a flat screw driver or putty knife to push in the 2 front tabs and the top is hinged so you open the top like the hood of a car.Alot of extra work in your vid and possibility of damaging crucial wiring that isn't necessary.
Do not have to remove all those parts. Just one part and one screw. Remove the vent in the back of the dryer. then one screw for the idler arm. You do not even need to remove all that to replace the belt.
I was watching your awesome youtube tutorial and wanted to see if you thought it would be a good idea to link the pulley from JACS on amazon in your video to help people out. I sell this part on amazon and thought i could offer your viewers a 5% discount just for being one of your subscribers. Thoughts?
Ben
yo bruh I got the same dryer trying to find that part my model number is the same as yours....please send me a link to where to purchase this....I see the part number but where do I find it to buy it.
impacc44 Look at this on eBay www.ebay.com/itm/302188308079
impacc44 DC96-00882C for Samsung Assembly Bracket Idler Pulley AP4213616 PS4216837 www.amazon.com/dp/B01FIHDRCM/ref=cm_sw_r_other_apa_whZEybC6YAX3B
impacc44 Mine runs like new now. And it's extremely quiet now.
fuck this video! no help at all. what a waist of my life.
Brandon Shefferd hey dude, people respond to my channel with thanks when i can help them out. Here it is 800 EST thi g starts screechin. Luckily you had the same thing as me. So tha k u for postin positive helpful things. Have a good resta the evenin man!!
Got this combo: www.amazon.com/dp/B07T7VNMKS/ref=cm_sw_r_cp_apa_i_fIaeEbE17P44B
For my DV48J7770EP/A2 model dryer. Tensioner pulley has dual ball bearings (but I still greased the shaft because I didn't know about the bearings until the pulley was off and at that point why not?). Highly recommend, replaced the belt too because if it's squeaking from a bad tensioner then damage has been done so why not spend the extra $5 since you're taking it apart anyway.
Great vid we have slightly different models but close enough that the vid was super helpful. AND kudos for showing the reassembly instead of just flashing some text like "reverse disassembly to reassemble GG I'm out!" Keep up the good work.
that is suck you need to disconnect those wires & dismantle every parts of the panel just to replace the pulley, i need to replace the pulley next week so i am confused OMG
Rob Bravo you don't have to do all of that. You could access the police system by removing the vent pipe in the back. It literally should take 20 minutes. Just remove 1 screw and the whole panel and vent pipe come out. This leaves about a 12in diameter whole in the bottom back of the dryer. You should have plenty of space to reach the pulley system, disconnect the spring unscrew it and remove it. All the stuff the guy did is unnecessary.
unless you can't get to the back
Ridiculous amount of disassembly just to replace a wear part.
Thank you. This helped me a lot
thanks for the video, it really helped out a lot and now my dryer doesn't squeek. sometimes my poop would dry out in the dryer and look like some jerky. it's nice to see that I can start making my jerky poo again.