The Dynamis Blade Video
Вставка
- Опубліковано 18 жов 2024
- Check out this detailed explanation and demo of both how the Dynamis Blade functions and its key features. This was a collaboration with Dom Raso (CEO of @Dynamisalliance) and Daniel Winkler (Master blade smith). The result was a full size extremely functional concealable blade. Dom Raso made it a point to listen to all end user feedback and dump it into this blade and its features. With turning that over to Daniel winkler, he nailed it. Check out the video!!
www.dynamisalliance.com
Worth every penny! The attention to detail on this blade is to the highest level.
Daniel Winkler & Tracker Dan! I'm sold!!!
I've looked at this for a while and thought it was over priced because for the money there's a lot of other stuff I can get and use everyday. However I put it off for a while and finally pulled the trigger. You have to hold it in your hands to appreciate it. It's light but SOLID and razor sharp. The sheath is the best out there for a CCW and the balance is incredible. I will save up and buy another to put back for a rainy day. I wouldn't put a price on my life either, this tool will be there when I need it.
a blade doesn't need to be reloaded, doesn't run out of ammo, doesn't malfunction/misfire, and is quiet.
He had me at Winkler. The guy will be considered an American treasure when he's gone. He's Bob Loveless but drinks beer with SEALS.
Couldn't agree more. Daniel is a true American Patriot!
I'm not even a youtube knife tard and this one got my attention. Seems seriously bad ass!
Cool blade and concepts behind the design....
Very cool design. I have a Winkler Belt Knife and it's a great blade.
I like this a lot. 3v is a beast too.
I've seen other videos where Dom goes into more detail about the nuances of this knife. Every edge and contour was thought out. It is awesome, and offers more than meets the eye, but I can't afford a $500 knife on a LEO's salary. I know a lot of cops, and I can only think of one of them who might consider buying a $500 knife. That one cop is the master knife instructor (a guy that certifies other cops to become knife instructors) for the whole state. As well-designed as this knife is, should it cost more than a Glock?
If this knife seems worth it to you then power on, but cheaper alternatives would be KA-BAR TDI Knives - $40-75 (depending on size).
*****
Get a Benchmade SOCP Dagger and trainer for $100 or so. It's used by US Army SF.
Hey I bought the knife so far had to get it reshape bed .. I love the knife and yes the blade has a grip skin rub issue I fixed wi tape. But I put my crkt abc knife and it fit perfectly. The g10 was comfy and I was wondering if you guys would consider a g10 grip.
Hey Dom is there an any advantage or down falls to putting paracord as a handle on any knife
That's a bad ass knife
Blade looks legit. For how much it cost I could probably rent Dom for a few hours. That dude could bust up some dudes. Glad he's on my team.
he sure did "bust up some dudes" in teams - guys resume is in his eyes in that POV video - f'n grim reaper right there
Awesome
This video was only made so that Dom could show off his abs.
Dom, I've been on the fence for sometime. My question and I hope you can articulate the pros and cons of both the single edge vs the the double edge. I believe in research and asking questions then buying and crying once.
Brother thanks for your time and consideration to the topic.
SM
Double edge gives you more cutting edge so forward stroke or backwards stroke can deliver cuts. The single edge exists due to some locations having laws against carrying a double edged knife.
(Yes, I know I am not the Dom you were hope for, but I saw this and thought I could explain it to my understanding)
Dom Lamson Any input is much appreciated. Thanks
Steve Mixson Oh and double edge knives tend to penetrate deeper using the same amount of force compared to the exact same blade but single edge.
When fighting a single edge blade theoretically reduces the effective strikes you can deliver by a third. Rather than being able to thrust and also cut in both directions you are limited to cutting in one direction only unless you can roll the hand over. A single edge blade is easier to strip (disarm) from the spine side, does not penetrate as well etc. In a tight clinch or ground grappling where you may have little ability to move your limb to cut the knife will always have a sharp edge close to to threat in order to cut them off you.
I wish we could carry this in Cali :/
*****
haha
You can, just don't get caught with it.
just carry it man. id rather be alive and in a little bit of trouble because of carrying this amazing blade than dead because I chose to carry something less effective
+Kevin Pilus Kommiefornia...
Dom, does this blade have a lifetime guarantee?
Def well thought out design! One of the most innovative fighting knives I have ever seen with combatives in mind. made by arguably the best custom knife maker dan winkler though I cannot afford this I think it is VERY reasonably priced. how much is your life worth.
You say it's reasonably priced yet you can't afford it? This is a knife that is marketed as a viable EDC/SD blade (which it clearly is) yet the price tag makes it a niche knife only attractive to SEAL tacti-cool groupies and knife collectors or people with money to throw around. I got a brand new WKII full sized blade for $400 so how is this smaller knife and an aluminum trainer worth $600? Not all WKII knives are even made personally by Dan anymore as he couldn't keep up with orders after the book No Ordinary Day hit the shelves so you are now paying for the Winkler brand but the knife you receive may have been made by someone else entirely who isn't a master blade smith. I'd also argue a set design from which hundreds or thousands of copies are manufactured is no longer a "custom" knife. Don't get me wrong I love Dan's work, his designs and excellent customer service and paid out for my WKII as will outlast me but in this case I think the knife is overpriced and should be around half the price they are asking. I guess they'd rather sell 1000 blades at $600 a set than 10000 at $300 because they simply can't make enough fast enough.
curious why these blades are so short compared to a traditional kabar issue fighting knife ?
I believe all of them made by this company are meant to be concealed inside the waistband
It's either this knife or Variant one's IKKEN blade
Definitely will come into use when my current Excel work threatens to spill over into a new tab ...
"you're going to rip your shorts before the blade doesn't come out" can someone explain what this means?
DW makes the BEST for the money blades,,, Hands Down...
Not for that price.
Agree
Looks like a excellent blade but selling for $600 due to the Winkler branding is steep. If you are gonna design a EDC edged weapon self defense system then make it affordable to the average person. I'd realistically be willing to pay $300 max for that knife and trainer. Only SEAL groupies or knife collectors are gonna be willing to pay $600 for this knife. You can get a Benchmade SOCP dagger and training blade that will do the job for self defense purposes for a sixth of the price.
Do you even lift bro?
$500 for a sharpened steel bar with a fingergroved handle and a sheath... You can buy a quality sword for that much, I'm not talking the sharpened crowbar wall hanger crap ether.
Yeah.. Love the design,.. But WAY TOO expensive! You can by a custom for that with just as good a design and with better materials!
***** What does it matter, it wasn't "hey you should buy a sword" it was "hey this shit is overpriced"
***** i make knives Justin. As Well as teach combatives. My reviews on high end blades can be found on here.. with all that said, I like the knife! I also know How much it cost to make.. these are about 200, 150 at the least over priced.. I'm sure they will sell a fee though. Nice blade.. but not as many as they would at a better price point..
I hate knives that have ruler thin handles, very uncomfortable, especially for training/fighting. Good video though.
Fine weapon, but for the price point 450$ there are decent sub-compacts that are way more practical..
Great Knife and Great Video but I got little ones to feed and for $450. Diablo! I can get a nice SIG. Sorry dawg at the end of the day, a knife is a knife.
449 dollars with a sheath.
Ouch I'll stick to my IKEA butterknife.