Ive builk what I ride, built 4 so far cranks and BB are the main problem, Nothing strong enough as yet! But gearing is a problem. I want to commute and use it as a trials , park bike. There seems to be no compromise!
I use a drill too, with the torque turned down of course. But I at least start the bolts by hand with a wrench to avoid cross threading and ruining the hub. Baby steps. You'll have it soon enough. The color at least is Big Bird approved.
True but I’ve now put in 60 bolts (multiple bikes and a couple of wheels multiple times) and it doesn’t seem like stripping is likely if they’re started really slowly
Looks like a fun build Ali. I love the color scheme. I am stoked to see you give it a serious go. How is the Bike cave progressing? Any way, great job and give the cute thief a cuddle for me. Cheers Bro - M
Maybe a dumb question to ask about a trials bike but why do you need the chain tension-er on a single speed hard tail build? My first thought is maybe you want it to take up the slack caused by chain stretch? .. is that correct? Rad bike my friend
You need some way to take up the slack in the chain…either horizontal dropouts you can slide the wheel back in or if you have a 12mm axle (like this has) you’d need some sort of sprung tensioner (or you can combine the two and have 12mm sliding dropouts but they’re usually more flexible than you’d like for trials). If you can picture my bike without a tensioner the chain would be really baggy and slap about making lots of noise and potentially even coming off the sprockets. My last bike didn’t have any tensioner though as my 22-18 gear ratio and 380mm chainstays is practically the perfect distance, it’s not perfect though as it can be too tight with a new chain and a worn one ends up being a bit baggy (especially when putting power down)…a tensioner is just a fail safe way of doing it
I love that the hex now stays largely the same each release, and it's just fettling now. It peaked a couple years ago and there's really not a lot that could make it any better. In a good way. I think I watch your videos equally for the cat as the bikes and riding. Very tasteful build as always. Are you planning on visiting Malverns classic this year?
Yes finally the video with all actually been waiting for and hopefully another XXX bike built lol Ali’s dreams have finally come true your new hex is finally here
My favorite build so far, and you do alot of good ones (the couple vintage builds you have are excellent as well)...Thank you Ali, great stuff here and always entertaining! 👍👍
Im a Street BMXer (no brakes, i do alot of trucks and bar spins and have really fkd fingers up) I want that chain. I love our HD half link chains but those boxed up kmcs were dope. I didn't have on for long before I went half link.
Damn. I was hoping for a one off trials frame from Pivot like from Santa Cruz and Marin. Perhaps that's just cooking on the back burner. There's always next year.
*NGL yellow has nevr been my fav clour but this bike is really nice, fantastic job ali, keep pushing and keep moving forward, Godd Bless and God Speed King*
Great colour scheme! The front axle bolt calls for a permanent black marker :) Very interested in the resulting bike weight - is it below 10kg? Also wondering how billy bonkers tires will coupe with natural terrain - it's a big difference to Ikons you usually use
It depends on the yellow for me, I wasn’t so impressed when inspired first said yellow but when I saw this deeper matte version they did I was impressed
Alright drillboy! Haters gonna hate but we used to drive the M5 taps into all the frame holes with drills at the touring bicycle company when prepping frames for builds or frame sales and VERY rarely had an issue. Pretty sure those different settings you showed us will have different torques though, technically.
You can insert an 8mm and a 5mm allen key at the same time to turn Shimano crank bolts. Not the best fit but will do the job and save big bucks on calipers. :D Also your drill's Auto setting (next to the Hammer and Drill modes) is a function for driving screws. It senses the screw (bolt in this case) bottoming out and stops applying full torque.
Rebuilding my bike at the moment Brought some Inspired hex BB's I hope they last well. Im changing out BB bearings every six months is this normal! What are the strongest BB's for trials on a normal BSA screw in frame! Bike looks sick by the way :)
Watching this with my son, he's veeeery nearly 3 & some of your build has blown his mind haha. He's only seen me build my BMX's so there's quite a few bits on your bike he hasn't seen before. He has shouted at me multiple times that your Purple Parts are absolutely not Purple, they are PINK!!! 😄
Al, I need you to visit with your toolkit - my front wheel is making a horrible noise and I think it might be a problem with the disc. Heading south anytime soon?
Purple Hayes are in my brain? ;) Another lovely build with some really nice subtle bling. What name would I like to see on some Schwalbe's? Cute Thief, obviously :)
are you disc rotors the right way around? because it would make more sense to me to put them the other way around so the arms dont crumple under braking load but are rather extended takinf advantage of the elastic of a steel
Why do you need a chain tensioner- just take out a couple of links and run it like a bmx. Always confused about that on hardtails, dj, and trials bikes. Sick bike over all though!
don't think I've meet anyone who owns a crank tightening tool, I just use a pair of pin nose pliers and jobs a good'un but I have noted that a vernier calliper works just as well thanks Ali
The Billy Bonkers aren't actually tubeless ready, right? All variants I found require a tube as per official statement. How come you run them tubeless?
Any tyre can be tubeless, just some aren’t advertised as being tubeless “ready” (IE they don’t have sealed sidewalls). Adding sealant to a normal tyre will eventually seal the sidewalls but it just might take a little longer until it does and becomes fully air tight
I don’t really like using alloy axle cranks after seeing Hope ones snap and DUB cranks rotate around theirs. They stopped making the GXP model so finding new ones is getting harder and harder. Shimano have always made decent cranks in my opinion but they had a fixed 4-bolt spider so you couldn’t get a nice low profile bash…now they have a removable spider and Inspired make a bash for them it’s a no brainier to use this combo
Awesome bike, but doesnt it need more purple though? Wheres the fatbike Ali? :D If i could name a schwalbe tire it would be Gnarly Larry, or Granny Gnar!
Nice build! Keep up the good job . Q- thieve Cool Kitty. Like the rim build. Want build pump dirt jump ! Think you can hook to some hoops ? Lol , I , like i9 hubs as Hope Never had their hubs yet . Have a good day.
Watching today i realised you don't put any frame protection on your bikes, is that simply because they get super bashed so it makes little difference?
Ali's neighbours whenever he builds a new bike must be like 'Muuuuuum, the English lad is defying physics again'
Wow, you're going to have a great time on that bike :D looks absolutely amazing. Thanks for uploading 🙂
Thanks for watching and commenting 😊
I just dream about a serious DJ street trial!
Ive builk
what I ride, built 4 so far cranks and BB are the main problem, Nothing strong enough as yet!
But gearing is a problem. I want to commute and use it as a trials , park bike. There seems to be no compromise!
FINALLY! Been so keen for this video to come out. Time to procrastinate, and put off my evening ride until after this video
Hope you enjoy it Mel!
looks awesome! yellow and purple is such a good combo!
You know what else is inspired? Your humor.
Looks awesome, Ali 👍
Thank you 🎉
I use a drill too, with the torque turned down of course. But I at least start the bolts by hand with a wrench to avoid cross threading and ruining the hub. Baby steps. You'll have it soon enough. The color at least is Big Bird approved.
True but I’ve now put in 60 bolts (multiple bikes and a couple of wheels multiple times) and it doesn’t seem like stripping is likely if they’re started really slowly
Looks like a fun build Ali. I love the color scheme. I am stoked to see you give it a serious go. How is the Bike cave progressing? Any way, great job and give the cute thief a cuddle for me. Cheers Bro - M
Thank you :) bike cave had a nice update recently but I’m waiting for a couple more things to arrive before I make the next video on it 👍🏻
Looks great, nice colour-combo, great presentation, well filmed and great humour as usual!
The lighting is spot on in the new workshop 👌 The bike looks spot on too. Cute thief steals the show as always though 😅
Maybe a dumb question to ask about a trials bike but why do you need the chain tension-er on a single speed hard tail build? My first thought is maybe you want it to take up the slack caused by chain stretch? .. is that correct? Rad bike my friend
You need some way to take up the slack in the chain…either horizontal dropouts you can slide the wheel back in or if you have a 12mm axle (like this has) you’d need some sort of sprung tensioner (or you can combine the two and have 12mm sliding dropouts but they’re usually more flexible than you’d like for trials).
If you can picture my bike without a tensioner the chain would be really baggy and slap about making lots of noise and potentially even coming off the sprockets.
My last bike didn’t have any tensioner though as my 22-18 gear ratio and 380mm chainstays is practically the perfect distance, it’s not perfect though as it can be too tight with a new chain and a worn one ends up being a bit baggy (especially when putting power down)…a tensioner is just a fail safe way of doing it
I love that the hex now stays largely the same each release, and it's just fettling now. It peaked a couple years ago and there's really not a lot that could make it any better. In a good way. I think I watch your videos equally for the cat as the bikes and riding. Very tasteful build as always. Are you planning on visiting Malverns classic this year?
Yeah I can’t really think of many ways it could be improved, maybe mounts for 203mm rotors? It’s pretty dialed otherwise 🤘🏻
@@Ali_Clarkson yeah makes sense, i don't really know of any trials riders that opt for smaller rotors.
Looks so gorgeous ❤❤❤
Yes finally the video with all actually been waiting for and hopefully another XXX bike built lol Ali’s dreams have finally come true your new hex is finally here
Slightly toned down the innuendos this time 😂 I hope it’s still entertaining though 😊
@@Ali_Clarkson lol Fitting the BB was absolutely hilarious
So sick! Been waiting for this build forever haha, the colour scheme is awesome too and hasn't the headangle become a little steeper this version?
My favorite build so far, and you do alot of good ones (the couple vintage builds you have are excellent as well)...Thank you Ali, great stuff here and always entertaining! 👍👍
The bike looks super dialled and good to see the cute thief too.
Looks cool 👍
Thank you :)
Ahhhhh rad! So stoked to see this thing out on some street rides!
You are one hell of a rider, content creator and awesome person. You are inspiring in many ways! Thanks and keep going! 🙌🪴
I love yellow frames. The purple parts are not my cup of tea though but to each their own. Looking forward to seeing you ride it.
wow wow, finally new hex =)
Looks insane! Good Job! 👏🏻
glad youve got a good set of sponsors now u definitely have earned them well done ali
Hugs from Brazil 🇧🇷🇧🇷
Hugs back from Scotland ❤
Love the bike Ali. Love your humour even more.
That’s so nice mate reminds me of my old inspired element same colour
Im a Street BMXer (no brakes, i do alot of trucks and bar spins and have really fkd fingers up)
I want that chain. I love our HD half link chains but those boxed up kmcs were dope. I didn't have on for long before I went half link.
Looks great! Can't wait to see a street ride!
Love the color combo Ali! Can’t wait to see some street riding on it!
Damn. I was hoping for a one off trials frame from Pivot like from Santa Cruz and Marin. Perhaps that's just cooking on the back burner. There's always next year.
its my fav colour combo AHHHH
It came out well didn’t it!
@@Ali_Clarkson beautiful
Looking forward to your vids on the new Hex!
I would personally love to see the rim brake mounts coming back to the Hex for the next version.
That’s an awesome bike build Ali!
Looks so clean! Love the colours!
Nice bike-hope there’s lots of fun times ahead for both of you. Loved the video too-made me chuckle😃
Awesome build- love the color scheme! If for some reason you have to go back to the bronze Dominions, you'll still have the bruised theme going :)
Looks mint can’t wait to see the videos
That looks awesome, Ali!
Spectacular 👍👍
Very nice indeed
wow that color 😍
Purple Hayes all in my brakes, lately things they don't seem the same.
*NGL yellow has nevr been my fav clour but this bike is really nice, fantastic job ali, keep pushing and keep moving forward, Godd Bless and God Speed King*
Nice ❤. Congratulations 🎉
Great colour scheme! The front axle bolt calls for a permanent black marker :)
Very interested in the resulting bike weight - is it below 10kg?
Also wondering how billy bonkers tires will coupe with natural terrain - it's a big difference to Ikons you usually use
I just love the construction of this frame. I wonder if it is possible to get something like this as a slack XC hardtail..
AWESOME looking bike
Inspired HEX FTW
theres something about yellow bikes, theyre just, beautiful. simple as that
It depends on the yellow for me, I wasn’t so impressed when inspired first said yellow but when I saw this deeper matte version they did I was impressed
Love this build.
Alright drillboy! Haters gonna hate but we used to drive the M5 taps into all the frame holes with drills at the touring bicycle company when prepping frames for builds or frame sales and VERY rarely had an issue. Pretty sure those different settings you showed us will have different torques though, technically.
How do you bed in your brakes? Ive seen a lot of different methods and some say others are bad or have problems. What do you think?
Super sweet looking bike, can't wait to see it in action! Also almost choked on my drink at the side business pun, should know better by now 😅
great colour
Agreed
Try kenda small block 8. They make them in 26 x 2.35 size. Best feeling tire I've ever had, but wears out quickly
You can insert an 8mm and a 5mm allen key at the same time to turn Shimano crank bolts. Not the best fit but will do the job and save big bucks on calipers. :D
Also your drill's Auto setting (next to the Hammer and Drill modes) is a function for driving screws. It senses the screw (bolt in this case) bottoming out and stops applying full torque.
I seem to do my bikes red and green (never to be seen) but I think it works.
Rebuilding my bike at the moment Brought some Inspired hex BB's I hope they last well.
Im changing out BB bearings every six months is this normal!
What are the strongest BB's for trials on a normal BSA screw in frame!
Bike looks sick by the way :)
I just ordered myself some ODI longkneck grips for my dj, waiting for them to arrive but inspired (hehe joke) by you Ali.
Cheers from Germany 🍻
Watching this with my son, he's veeeery nearly 3 & some of your build has blown his mind haha. He's only seen me build my BMX's so there's quite a few bits on your bike he hasn't seen before.
He has shouted at me multiple times that your Purple Parts are absolutely not Purple, they are PINK!!! 😄
In the beginning, I wasn't so enthusiastic about the yellow, but somehow I like it now🤩
Al, I need you to visit with your toolkit - my front wheel is making a horrible noise and I think it might be a problem with the disc. Heading south anytime soon?
We should get you a sponsor for a compact lathe-mill combo. There are some compacts out there like Proxxon 34104...
Do very much like the yellow, and a Saiga super cool animals
Glove love 🧤
Just got the scratch n sniff 🤣
How much is weighs??
Yellow - i love it!❤
Purple Hayes are in my brain? ;)
Another lovely build with some really nice subtle bling. What name would I like to see on some Schwalbe's? Cute Thief, obviously :)
Isnt the geo the same as the Flow? Cheers 🤙
I don’t think so, I think the flow has a slightly slacker head angle and longer chainstays
Geat build 🎉
are you disc rotors the right way around?
because it would make more sense to me to put them the other way around so the arms dont crumple under braking load but are rather extended takinf advantage of the elastic of a steel
That's lovely...although the silver end cap on the fork axle bugs me 😁
Why do you need a chain tensioner- just take out a couple of links and run it like a bmx. Always confused about that on hardtails, dj, and trials bikes. Sick bike over all though!
Ali can i ask what is that chain that you use on your bike cheers mate
Shwable jibby James
Any plans for your old one Ali?
don't think I've meet anyone who owns a crank tightening tool, I just use a pair of pin nose pliers and jobs a good'un but I have noted that a vernier calliper works just as well thanks Ali
Are Inspired not doing the seat-post combo in 27.2?
The Billy Bonkers aren't actually tubeless ready, right? All variants I found require a tube as per official statement. How come you run them tubeless?
Any tyre can be tubeless, just some aren’t advertised as being tubeless “ready” (IE they don’t have sealed sidewalls). Adding sealant to a normal tyre will eventually seal the sidewalls but it just might take a little longer until it does and becomes fully air tight
Makes sense, thanks for your response. Yeah, I ended up getting them as well and run them in a tubeless setup and they are great for what I am doing.
Fun name for Schwalbe tyres, Schwalbe Silly Simons
Does the billy bonker come in 24”?
Yes but only in 2.1”
Tightening the Shimano bolt with a set of callipers has made me wince slightly.
Backwards manual?! That looks incredibly difficult, not sure I've even seen one before.
I would ride on a Rally Ali 🤪
Is there a reason you opted for Shimano instead of SRAM gx like you did some previous years?
I don’t really like using alloy axle cranks after seeing Hope ones snap and DUB cranks rotate around theirs. They stopped making the GXP model so finding new ones is getting harder and harder. Shimano have always made decent cranks in my opinion but they had a fixed 4-bolt spider so you couldn’t get a nice low profile bash…now they have a removable spider and Inspired make a bash for them it’s a no brainier to use this combo
Suggestions for a tire name - Enduro Ed, Freeride Fred, Shreddie Eddie, Wet Matt, Sandy Sam.
What's brakes are Best for learning wheelie mtb, which not sharp and smoot
listen to the trial bar XD
Where's the purple bell?
Crank length? And Billy isn't tubeless, I wonder how it holds the beer.
Awesome bike, but doesnt it need more purple though? Wheres the fatbike Ali? :D
If i could name a schwalbe tire it would be Gnarly Larry, or Granny Gnar!
Nice build! Keep up the good job . Q- thieve Cool Kitty. Like the rim build. Want build pump dirt jump ! Think you can hook to some hoops ? Lol , I , like i9 hubs as Hope Never had their hubs yet . Have a good day.
Watching today i realised you don't put any frame protection on your bikes, is that simply because they get super bashed so it makes little difference?
missd a few purple parts lol but nice build dude
I actually love the color scheme. I'm sick of black and grey bikes. What's less fun than a black bike?
your cat loves a pepperami
All cool as always, just please buy a 25hex screw driver - it's as fast as getting your drill and doesn't hurt anyone ;) say hi to your cat
Nice cat