DIY CO2 Citric Acid and Baking Soda | High Pressure DIY CO2 Generator System
Вставка
- Опубліковано 5 вер 2024
- Video tutorial on how to make DIY CO2 Generator using Citric Acid and Baking Soda.
Subscribe : goo.gl/J4sgjG
This CO2 Generator kit is made of two bottles of pressurized soft drinks (Sprite). Each contains 1.5 liters but can also use bottles with a volume of 2 liters or more.
Each bottle contains different liquid. The first bottle contains mixture of water and citric acid, the second bottle contains mixture of water and baking soda.
When the two liquids are mixed, a chemical reaction will occur and produce carbon dioxide (CO2) gas. This gas is used for aquasacpe plants in water.
The materials needed to make DIY CO2 are:
1. Two bottles of soft drink pressurized with a volume of 1.5 liters.
2. Pressurized 6 mm plastic hose.
3. Y or L - hose connector.
4. L - hose connector.
5. Two molded bottle top with tube retainers.
6. Needle Valve.
7. Check Valve.
8. Bubble Counter.
9. Co2 Diffuser.
10. Water (400 ml for citric acid, 200 ml for baking soda).
11. 200 gram citric acid.
12. 200 gram baking soda.
This system can produce Co2 for 7-10 days depending on the number of bubbles that come out.
NOTE:
Correction: At 5:07 minutes should be 200 ml of water
Although Co2 is good for aquascape plants, but if too much it will have a negative impact on fish and other animals that do not need Co2. Therefore Co2 expenditure must be adjusted based on needs.
DIY CO2 Generator System Using Sugar and Yeast:
• How to make CO2 Genera...
CO2 Diffuser from check valve:
• How to make DIY CO2 Di...
CO2 Bubble Counter and Diffuser from Syringe:
• How to make DIY CO2 di...
More videos in HK Channel:
/ hasnahkamilah
This is the most detailed tutorial for diy co2.
Good job!
For mix baking soda you wrong write its that 200ml water not 20ML......
How long can this product last and how many usage?
This is such a money saver and I absolutely love the diy system but I find my citric acid is draining into the baking soda solution too fast and is gone within 2 days! I try to find the perfect spot with the valve to create backlog but not too much....and it still happens....any ideas?
My tiny aquarium will now turn epic *_*
Wait.. in some other tutorials, we need to build up the pressure until about 1.5kg/cm³ before can connect the diffuser and release into aquarium. But it seems u didn't have to. Does this help to make the CO2 supply longer? 🤔 mine finished in just 4 days 😔
Where did you buy your moulded bottle top with tube retainers?
This non stop repeated beat, killed the video
Does the pressure cause the fluid from one bottle to be transferred to the second bottle?
How long does it work ?
What is the use of y connector?
with that quantity how.long.will it last?
Sensational, the best video about this system, congratulations!
for how long this will keep working, is this better than yeast and sugar
Nice video bro the music had me jamming
Can we use for soda stream
Kit pretty cheap on ebay. Thanks brother.
mostlyHarmless link please
Whats 200g of citric acid converted to millilitres in vinegar please.
How long to wait the system reach the max pressure?
Hello, i cant seem to find pressure gauge. Can i skip the pressure gauge?
Can you specify about the type of pressure gauge used in the video?
You can use egg shell with vinegar. The result fluid will be PH neutral calcium solution.
Thanks for video 💯🤙✌️
how many mm did u use for an clear hose
how long its last those 2 bottles??
Did you make those bottle tops or buy them? I can’t find them anywhere.
U can get the kit on ebay. Just search diy co2 generator kit
Om itu yg orange di presure gauge braket sambung ke selang apa?
How long can be used?.
Why 2 bubble counters??
if use vinegar how much?
That's a lot of widgets there. Is it a kit from amazon?
wish look for co2 diffuser
also on Amazon
If i not use Y connector is it problem. Could you please tell me why we use Y connector. Thanks
Because the liquid of baking soda is grativate,so we need connector y.
Can this co2 gen effective for plants?
Yes
One bottle... Maximum use day
can you elaborate on the vinegar? do i mix it with water or is it just straight up 600ml of vin?
If with vinegar I mix it with water with 1: 1 ratio. That's just my experience.
Can i use sugar and yeast in both bottles ..instead of citric acid and baking soda?
Did you tried it? I am looking for a way to carbonate drinks without large expenses
@@d.r8892 i did make my own diy co2 system using 2 soda bottles(sugar n yeast) and lil bit of silicone gel to plug the holes and some airline tubing with checkvallves and a glass diffuser.. if you want to see the system i can post picture in my profile..but if you are asking if you can use sugar and yeast with this system ,yes offcourse you can
how to control the pressure if too much gas produced?
My c02 gen. kit came with an "acid absorbing ball". Its a magnetic ball that you place in the acid solution (first bottle) as well as a magnet outside the bottle to raise the tube from the solution, thus stopping the reaction. There wasn't one used in the video. Hope this helps.
I think the pressure relay can be used, to stop solenoid valve since pressure raises too high. example let the system work during pressure within range 0-1.5 bar, other wise solenoid valve will prevent acid flow to soda bottle
How long does this will last?
What capacity are these bottles? Can you give the proportions of ingredients for one liter bottles?
Those are 1.5L soda bottles. They're built to hold pressure.
Proportion are; bottle #1 - 200g citric acid + 600ml water. Bottle #2 - 200g soda bicarbonate + 200ml water.
nice setup... let me know where to buy these tools?
the bottle are 1L or 2L !?!?
Where did you bought your CO2 reactors?
Kak itupengerat alat pengukur tekanan itu ukuran berapa
i did that but after i wake up all ctric acid was in soda bottle and ctric acid bottle was empty what i have to do ? to won't happen this again?
Completely close the valve of co2 outlet
@@gaganjotsingh3403 not sure if mine has a leak in the needlevalve.. I closed mine but to my surprise the pressure is still coming out so my citric acid was used up in a day too..
Nice vid.
Cost of pressure gauge
Nice
Bang kalo co2 diy tanpa isi check valve bisa gak?
Bisa
Klo citrun kluarnya dri sambungan T gmn jd gk turun langsung kna sodanya alhasil reaksi jd lambat..
Saya sudah coba tanpa "T". Hasilnya lebih bagus pake sambungan "T" karena cairan citrun akan bergerak cepat ke botol yang beisi baking soda karena tanpa tekanan air. Kalau masalah reaksi masih normal bahkan bisa tetap sampai habis di botol yang berisi citrun. Itu hanya pengalaman saya aja. Makasih ya.... :)
@@HasnahKamilah , klo reaksi nya berhenti itu kenapa ya gan sy pake kit d501 tp cm bbrp jam hilang tekanannya
Hi, I installed this system 1 week ago. I tried to adjust the number of bubbles today, I opened the valve too much. After that, all the liquid in the citric acid bottle flowed into the carbonate bottle. Is there a way to prevent this?
A check valve
NRV
semisal bubble countenya dipasang di luar tank bagaimana?
Bisa
Bisa tahan berapa minggu ?
How do you stop the cO2 at night so you don't gas your fish and kill them?... and not waste co2 because plants will not use carbon dioxide at night.
you can shut it off .
@@mikeperry9127 if we can shut off , risk of pressure and explode?
Bang pnya sya klo tekanan abs citrun nya ga ngalir otomatis, knp ya?
Dipencet lagi
how many days can i use it ?
Maybe 1 week👌
Tekanan yg ideal brapa di presure nya om? Pnya sy diangka 4.. takut mledug
sama njir hampir 4 ngeri euy, tp kyk nya botol nya kuat ya tekanan sampe 5
Tekanan saya malah ga sampe 1 om. Cara biar tekanan naik gimana yak?
How to stop at night
Tu botol 7up atau sprite
Nice bro keep it up
Thank you Bro...
Punya gua kok 2 jam semakin kecil yah min?
Song?
Findir
budget berapa om?
Kalau pake Gauge Pressure sekitar 120rb.
@@HasnahKamilah sampek brp hari gasnya mbak?