Ha , I haven't played much in the shop lately, I think losing flying space, upset me, what am i to do without a place to crash. Why build . Tinker with new technologies... you have found my weakness. A motivation I built planes for many of my grandkids ...none want to fly, shame many of those planes are flyable add one of several transmitters and a battery . No they live with their nose stuck in a phone or tablet ... even bought flight Sim for their game console... if their not going to use it send it back, have input on 75 inch screen for game, something to do while awaiting a new season of ? I shall build a new gadget just to try out these new ELRS tricks winter use to be build time, spring maiden a whole summer to crash ...darn pandemic lock down building planes and watching ever season of Midsommer murders, grew fond of Barnaby, he got old and retired. Well time to go pumpkin pie and coffee awaits. Have a wonderful new year , my friend .
Can anyone tell me why SBUS does not work for the ZoHD Kopikot for the radio master er8gv however CRSF does when configuring the receiver via the WebUI? With sbus AETR works but not the mode switch, however on CRSF everything works as it was intended to. Is there an explanation for that?
People on reddit rcplanes always seem to hate on ELRS for some reason. Is the main drawback related to flight controller compatability? I dove into the hobby 6 months ago and have elrs on my two planes and i'm just not educated on the drawbacks. But it seems like a very modern, inexpensive, and capable platform otherwise.
Issues with CH5 being only two position and all the other things covered in the video. ExpressLRS was designed for Betaflight quads and is evolving into a more rounded system... Happy flying
WHAT IS WRONG with various receivers that when they go into blinking WiFi mode my laptop will either not see the WiFi signal or see it and vanish once you have tried to connect or it allows you to connect and then only goes to the Edge browser and a microsoft page not the ELRS Page. Thanks for all your efforts there really helpful.
I've never seen that on any of the current generation of ELRS receivers. I'd try another device to connect to the Rx or try it away from all of the other WiFi devices in your house/office. Best of luck!
For me, the safest and strongest connection is still TBS Crossfire. All 2.4 radios have similar performance due to the propagation and power levels... Happy flying
Another outstanding video that fills in more of my knowledge holes! Once again, many thanks Lee and happy to be a Patreon…I always get great value for my money on your channel! 👍👍👍
Thanks for another amazing video, Lee!! I started flying JR radios 30+ years ago and was a Team JR guy up until we made the switch over to Spektrum and have flown those radios for many years as a Team HH guy. I've been playing with ELRS and the AMAZING TX16S MKII Max for a few weeks now and your channel KEEPS coming up in my quest for information!! Thanks so much for all you do and the knowledge you have imparted into my pea brain!! 😂😅
That's really informative thanks. I never knew about the subtleties of ELRS, the special role for channel 5 and the different update rates. Just brilliant.
I used the radiomaster 4ch micro elrs rx on my jta slick 3d plane with some really fast servos and holy crap can you feel the lower latency. Never had such a responsive plane. It was really wasy to bind as well. Looking forward to using elrs more on my fixed wings.
Hi, what should be the inputs and mixes setting? Should I create a input( SA switch ) in channel 5 , and also assign it to A channel in mixes ? Can you please help
@@Painless360 can you refer to a video of yours ? I don't understand how to make channel 5 high , as channel 5 is remapped to aux 2 in webUI ,So how to set Aux 1 to high ?
Ok, 333Hz is for digital servos, but will an analog servo work with 100Hz correctly or does it need 50Hz? I wish you and your family a Happy New🎉😊 Year
Wow! Tha is Lee. I mainly have slope soarer with ELRS and never added Ch5 on the mixers. I don't need arm, so I have set ch5 to MAX. Thanks for the tip!
If you are not flying too far away from yourself then you've probably not bumped into the lower power setting range issues. CH5 high will ensure that it is all of the features are 'active'. It is used to enable safeguards and performance settings in the software and hardware. See www.expresslrs.org/software/switch-config/
I had no idea all of this went into the PWM receiver setup. On my model, I used a serial receiver with iNav, and it set up like everything else did. Will definitely come back when I do a smaller, cheaper plane.
Yep, with INAV you use the same stuff as ExpressLRS was designed to do with Betaflight - four main control channels, a arming switch and a few other channels for modes and settings.. Happy flying!
super helpful! I wanted to get into the hobby, and I thought id start off with an elrs radio, cause it sort of seems like the most modern thing. But most of the tutorials and so on are designed with FPV in mind(and I want to fly fixed wings).
Since they are open to alternating the packets, I do hope in the future they start adding some basic telemetry information to the packets at a lower rate (lat/lon/speed/alt etc, enough to fly home). I was disappointed when I realised the many switches on the TX16S could not be used with ELRS due to the limited channels. Based on your video the other day with 6 flight modes, and the 6 lit buttons on the TX16S, I assume similar mapping can be used to make those 6 buttons ardupilot flight modes? Not sure if I would prefer it to SA/SB but certainly easier to visualise.
@@Painless360 Hmm, I think whatever mode I had was limited to 12 + RSS + LQ, so maybe I missed a 16+2 config. 12 was not enough for my larger ranger with camera switching/flaps etc. I wanted to add head tracking so those extra 4 would help a bunch. I will have a look, thank you.
After reading the spec again and checking my config I was on wide. I assume if I switch to "Full res 16 ch rate/2", then I would expect all channels to be usable its just the packets sent are alternated. I take it aux1/channel5 is encoded into each packet for armed too. Edit: I see why I was confused previously, I needed to change the rate first to either 100/333hz to gain access to the other modes.
Hello Lee, I fly ELRS long range and sometimes my telemetry just cuts out or certain data isnt transmitted correctly by my receiver. Is there any way to get better telemetry at a higher wattage? I think with the new ELRS 900mhz system from Radiomaster you can use the actual transmitter module to transmit telemetry back. Does something like that exist for 2.4ghz ELRS? Thanks.
No, Crossfire is far superior for telemetry and PWM systems at the moment. Long range, robust telemetry, and full speed channels. ELRS is catching up as it moves away from the Betaflight-Quad only style of signals and control...
@@Painless360thanks so much. After doing some research I leaned my Radiomaster RP1 only has 10mW of telemetry. Just bought the RP3 with 250mW of telemetry.
Ha , I haven't played much in the shop lately, I think losing flying space, upset me, what am i to do without a place to crash. Why build . Tinker with new technologies... you have found my weakness. A motivation I built planes for many of my grandkids ...none want to fly, shame many of those planes are flyable add one of several transmitters and a battery . No they live with their nose stuck in a phone or tablet ... even bought flight Sim for their game console... if their not going to use it send it back, have input on 75 inch screen for game, something to do while awaiting a new season of ? I shall build a new gadget just to try out these new ELRS tricks winter use to be build time, spring maiden a whole summer to crash ...darn pandemic lock down building planes and watching ever season of Midsommer murders, grew fond of Barnaby, he got old and retired. Well time to go pumpkin pie and coffee awaits. Have a wonderful new year , my friend .
Thanks for tuning us up 🤘 It is really evolving ! Hard to imagine even whats up in 5 years from now ! 🙏 I'm here to see it 🙂
Thank you. As a fixed wing pilot flying with ELRS i didn't know this.... Good information!
Our work is amazing. Can you recommend a beginner fpv wing. I know how to fly drones hence I want something which I can use elrs and dji o3 for fpv
Thanks a lot, Lee! Really valuable information!!! 😃
Happy new year! And stay safe there with your family! 🖖😊
Can anyone tell me why SBUS does not work for the ZoHD Kopikot for the radio master er8gv however CRSF does when configuring the receiver via the WebUI?
With sbus AETR works but not the mode switch, however on CRSF everything works as it was intended to. Is there an explanation for that?
I'm not following, the Kopilot doesn't support CRSF...
People on reddit rcplanes always seem to hate on ELRS for some reason. Is the main drawback related to flight controller compatability? I dove into the hobby 6 months ago and have elrs on my two planes and i'm just not educated on the drawbacks. But it seems like a very modern, inexpensive, and capable platform otherwise.
Issues with CH5 being only two position and all the other things covered in the video. ExpressLRS was designed for Betaflight quads and is evolving into a more rounded system... Happy flying
WHAT IS WRONG with various receivers that when they go into blinking WiFi mode my laptop will either not see the WiFi signal or see it and vanish once you have tried to connect or it allows you to connect and then only goes to the Edge browser and a microsoft page not the ELRS Page. Thanks for all your efforts there really helpful.
I've never seen that on any of the current generation of ELRS receivers. I'd try another device to connect to the Rx or try it away from all of the other WiFi devices in your house/office. Best of luck!
Is it worth it and safer or stronger signal vs the standard 2.4? I fly DS gliders and always looking for the fastest and strongest connection.
For me, the safest and strongest connection is still TBS Crossfire. All 2.4 radios have similar performance due to the propagation and power levels... Happy flying
This was a needed video, as great as frsky once was they no longer provide what we need.
Another outstanding video that fills in more of my knowledge holes! Once again, many thanks Lee and happy to be a Patreon…I always get great value for my money on your channel! 👍👍👍
Thanks for another amazing video, Lee!! I started flying JR radios 30+ years ago and was a Team JR guy up until we made the switch over to Spektrum and have flown those radios for many years as a Team HH guy. I've been playing with ELRS and the AMAZING TX16S MKII Max for a few weeks now and your channel KEEPS coming up in my quest for information!! Thanks so much for all you do and the knowledge you have imparted into my pea brain!! 😂😅
That's really informative thanks. I never knew about the subtleties of ELRS, the special role for channel 5 and the different update rates. Just brilliant.
I used the radiomaster 4ch micro elrs rx on my jta slick 3d plane with some really fast servos and holy crap can you feel the lower latency. Never had such a responsive plane. It was really wasy to bind as well. Looking forward to using elrs more on my fixed wings.
I always learn so much when I watch your videos. Thank you so much, I think you just solved why I wasn't getting any output to my plane.
Hi, what should be the inputs and mixes setting? Should I create a input( SA switch ) in channel 5 , and also assign it to A channel in mixes ? Can you please help
Setup of the channel is the same as any other radio. The only thing extra is make sure that CH5 is high when you fly... Happy flying
@@Painless360 can you refer to a video of yours ? I don't understand how to make channel 5 high , as channel 5 is remapped to aux 2 in webUI ,So how to set Aux 1 to high ?
ua-cam.com/video/h7YAMw8OIsM/v-deo.html
Ty for this video!! I’m just now getting on the ELRS train and this has helped me immensely 🎉
I just added Sbus to 3 happymodel rx’s I had laying around in the parts bin haha 😂 life is good now! Thanks again!!
Thanks for all the info!
Ok, 333Hz is for digital servos, but will an analog servo work with 100Hz correctly or does it need 50Hz?
I wish you and your family a Happy New🎉😊 Year
The speeds talked about are for the connection to the reciever only. Not the PWM speed. Happy flying
I put strobes/leds on channel 5 as well as throttle cut. So when armed, my strobes come on as well. When not armed, it's throttle cut.
Nice idea!
Wow! Tha is Lee. I mainly have slope soarer with ELRS and never added Ch5 on the mixers. I don't need arm, so I have set ch5 to MAX. Thanks for the tip!
If you are not flying too far away from yourself then you've probably not bumped into the lower power setting range issues. CH5 high will ensure that it is all of the features are 'active'. It is used to enable safeguards and performance settings in the software and hardware. See www.expresslrs.org/software/switch-config/
I had no idea all of this went into the PWM receiver setup. On my model, I used a serial receiver with iNav, and it set up like everything else did. Will definitely come back when I do a smaller, cheaper plane.
Yep, with INAV you use the same stuff as ExpressLRS was designed to do with Betaflight - four main control channels, a arming switch and a few other channels for modes and settings.. Happy flying!
RX channel and output configuration can also be done directly from the TX 👍
Not on all recievers. Happy flying
Great 💯👍
super helpful!
I wanted to get into the hobby, and I thought id start off with an elrs radio, cause it sort of seems like the most modern thing.
But most of the tutorials and so on are designed with FPV in mind(and I want to fly fixed wings).
Since they are open to alternating the packets, I do hope in the future they start adding some basic telemetry information to the packets at a lower rate (lat/lon/speed/alt etc, enough to fly home).
I was disappointed when I realised the many switches on the TX16S could not be used with ELRS due to the limited channels. Based on your video the other day with 6 flight modes, and the 6 lit buttons on the TX16S, I assume similar mapping can be used to make those 6 buttons ardupilot flight modes? Not sure if I would prefer it to SA/SB but certainly easier to visualise.
Not sure what you mean by limited channels as you can have up to 16 easily in the model... Happy flying!
@@Painless360 Hmm, I think whatever mode I had was limited to 12 + RSS + LQ, so maybe I missed a 16+2 config. 12 was not enough for my larger ranger with camera switching/flaps etc. I wanted to add head tracking so those extra 4 would help a bunch. I will have a look, thank you.
After reading the spec again and checking my config I was on wide. I assume if I switch to "Full res 16 ch rate/2", then I would expect all channels to be usable its just the packets sent are alternated. I take it aux1/channel5 is encoded into each packet for armed too.
Edit: I see why I was confused previously, I needed to change the rate first to either 100/333hz to gain access to the other modes.
First
Hello Lee, I fly ELRS long range and sometimes my telemetry just cuts out or certain data isnt transmitted correctly by my receiver. Is there any way to get better telemetry at a higher wattage? I think with the new ELRS 900mhz system from Radiomaster you can use the actual transmitter module to transmit telemetry back. Does something like that exist for 2.4ghz ELRS? Thanks.
Make sure you are using a reciever with higher telemetry power. Some of the smaller ones are very low power... Happy flying
@@Painless360i have heewing t1 and Tbs crossfire , and i didn't know about setup like this video, would it matters with tbs too?
No, Crossfire is far superior for telemetry and PWM systems at the moment. Long range, robust telemetry, and full speed channels. ELRS is catching up as it moves away from the Betaflight-Quad only style of signals and control...
@@Painless360thanks so much. After doing some research I leaned my Radiomaster RP1 only has 10mW of telemetry. Just bought the RP3 with 250mW of telemetry.
Thanks for video... 😊
I hope it answered your question buddy! :D
@@Painless360 thanks again, i dont use elrs pwm rx but maybe in the future. But in the video did solve my problem.