Tutorial - Disc brake Vespa PX: Change brake disc & brake pads.

This video tutorial shows you how to change the brake disc and brake pads on the Vespa PX .
The brake disk has a thickness of 4mm as standard. At a thickness of 3.5 mm the brake disk should be removed and exchanged. In addition, the brake disk should be removed if deep grooves are visible or unilateral wear.
The brake linings should be replaced if the lining falls below a thickness of 1.5 mm.
When cleaning the brake disc, never use diesel or oil-containing agents.
Further information: wikiwaspia.squa...

[@jupvan]

Sehr geil gemacht, allerdings biete ich mich gern als synchron Stimme an , mit der ollen Siri ist mir das Niveau hier viel zu hoch ;)

[@RPWaggel]

Richtig. Es fehlt so ein wenig die kackbratzige Authentizität. :-D

[@blechgefaehrten]

Auch ein cooles Video. Schau doch auch mal bei uns vorbei: ua-cam.com/video/BbxyFMNf_Xs/v-deo.html

[@seansimpson2586]

Any tip to removing the hub with rubber mallet? Mine is stuck on even with tapping with the mallet.

[@RPWaggel]

You should try a heat gun. This can helpa little bit.

[@seansimpson2586]

Wespenblech - Vespa Archiv I got it off with a puller tool and an impact driver.

[@RPWaggel]

Something like this? (Link to a puller tool photo): www.poolcenter.com/images/schematic-products/ZHAF0001.jpg

[@seansimpson2586]

Wespenblech - Vespa Archiv exactly