Це відео не доступне.
Перепрошуємо.
Tacoma Eibach 1-Inch Pro-Truck Rear Lift Blocks (2005-2020) Review & Install
Вставка
- Опубліковано 16 вер 2020
- Shop this Rear Lift Block Kit: terrain.jp/2Mp...
🎞Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw
An Eibach Lift Block Kit is a simple and inexpensive way to get the extra lift you need. These Eibach Pro-Truck Rear Lift Blocks will raise the rear of your 2005-2020 Toyota Tacoma by 1.0-inch to increase ground and tire clearance.
The included Eibach Rear Lift Blocks have been CNC-machined from aircraft grade billet aluminum for superior strength and durability. Eibach then completes their Lift Blocks in a durable black anodized finish for good looks and long lasting corrosion resistance.
Straight Forward - Bolt-on Installation. Eibach designed their Rear Lift Blocks to be a straight forward bolt-on install with no cutting or drilling required. With all the necessary hardware included, this Lift Kit can be installed in about 2 hours time. terrain.jp/2Mp...
Item TT6403
----------------------------------------------------------------
🎞Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw
Facebook: / extremeterraintacoma
Instagram: / extremeterraintacoma
ExtremeTerrain.com is your shop for the best in Toyota Tacoma and Tundra aftermarket parts and accessories!
www.extremeterr...
#tacoma #tundra
Shop this Rear Lift Block Kit: terrain.jp/2MpxW7W
🎞Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw
I just installed these last night! They are awesome!
Did you need an alignment for the rear?
It looks like you installed them backwards. The tapered end should be towards the front of the truck, so the rearend is turned up to compensate for change in the angle. Installing them the way you did would cause the rearend to be turned downwards and add more angle to the driveshaft.
Love it, but Spray those bolts next time to prevent galling!
That truck needs some undercoating
I need this on the rear driver side only to fix my taco lean
Did you buy this for the tscoma lean?
I have the same problem but I don't know if it's gonna level the truck or it's gonna put more pressure on the passenger side
You forgot to wear your safety glasses 🥽😳😬😂
I installed this and it only gave me .5 lift it did not give me full inch. I have Eibach pro kit and the back sits lower.
I had the same issue, not with Eilbach. Talking to a Toyota specialist, apparently that just happens sometimes on the spacer leveling kits.
Is this a video to demonstrate how not to do it?
See my comment
Safety glasses girlfriend!
Why are u using a lift when 99% of us don't have a lift in our garage.. Next time do this with Jack stands.
Stop crying, cry baby
Can I install this on just one side? My left rear sits much more than the right rear. thanks
Hmmm sounds like the leaf pack on one side is sagging. That’s if you have the same hardware on both sides.
Do you need to replace rear shocks that extend when adding 2 in rear lift?
Unsure but I am installing old man Emu ones on mine. I heard those are amazing. Don’t know yet
It was only a 1 in rear lift
@@unodfredy whats the link for the OME
@@legion1630 I got them off Amazon. They’re OME and they are for a 2 inch rear lift
If you install that you need wheel alignment or no
Not on rear but on front you do
Thx. 4 the inf. Great job. U r so beautiful.
Thanks for watching! -Zach
I am pretty sure she installed the them wrong they tapered and the way eibach lettering is facing they are installed wrong.
Lmfao 😂
I have some springs installed in place of the factory bump stops. Can I still install these?
Sumo springs....... hate auto correct.
@@cheesepuff2619 i have Timbrens myself. Sumos also should work no problem.
Never tighten u bolts like that!, you are almost guaranteed to misalign the bracket. Always go in a diagonal direction.
they mentioned in the video to tighten the bolts even and did the complete opposite 🤦♂️
What makes this take 2 hours? looks like a pretty simple install
Yeah I did my self at home and I didn’t take 2 hrs
Because it was a girl installing it
No torque specs, no use of penetrating fluid for dis-assembly, no anti-seize for install ????
No torque wrench. Nice 👌 yeah no thanks lol . That's why no one touches my truck lol
haha you really only need it for the shock that is about it, The ubolts, I mean yeah you can but it wouldn't really do anything or matter. Overthinking them is just going to make it harder to take them off next time or leave a mark on the leaf spring which is no big deal and will happen anyway from when the ubolt rubs on the spring.
@@subradiant_music you obviously do not understand why I'm saying what I'm saying right? She tightened the bolts with the impact gun that has way over 200 lbs of torque and they dont always get enough torque as well if you are doing it by "feel". Those u bolts need about 75lbs. Either way I need to make sure the u bolts are tight enough if I'm going to go off roading or driving high speeds. Last thing you need is your axle coming off.
You need to torque u bolts to like 90 ft lbs on oem on this maybe 155 ft lbs
Lower shock bolt to like 55 no torque 😂
@zgarcia1286 you need to tighten them evenly the impact gun does not do this at all. I do most things by feel and sure you can get them by feel but I off road all the time and don't trust what she did. Either way it's just an opinion 🤷. Doesn't mean a thing, do whatever you please with your vehicle, I'm pretty anal about my cars I get it lol.
Can somebody get my girl a new pair of gloves. Do better extreme terrain
1 inch 😂😂
La quiero de novia ah esta hermosa gringa
Eww who likes the rake look
Probably your mom