Toyota Tacoma Lift Install - Alternative Front Install Method
Вставка
- Опубліковано 1 лип 2024
- Installing a 2" spacer lift on a 2016+ Toyota Tacoma (3rd gen). The front install method used is slightly different than most videos I've seen on UA-cam and might be easier.
2" is the maximum I would personally recommend for a spacer install as any larger the struts will bottom before the bump stops make contact.
An alignment is 100% necessary after any lift kit install. This was done while our new larger tires were installed. - Авто та транспорт
very grateful. This made my 1/2" front spacer idea a simple task.
Glad it helped!!
OMG u made this look easy I might install mine this weekend very VERY HELPFUL THANKS 🙏
Glad it helped!
Way easier than any other videos I have watched
Thanks! Glad it's easier!
You made that look real easy 👍👍👍👍👍
Thanks 👍
Genius=Strut spacer installation made fast, easy & practical by this video. Thank you.
Welcome! Glad the video was helpful.
Followed along with this video to do my lift this morning.
Hope the video was helpful/useful! Thanks for watching.
Finally found a full 2/2 inch level kit video 😂 everyone either does the 2/1 or 3/2
Glad the video was helpful!
Bruhhh... fastest easiest way to do it.. thanks for this great vid... 🔥 🔥 🔥
Happy to help!
Thank you you are the only one that i found useful
Thank you! Glad the video was helpful.
La mejor forma de poner los espaciadores muy buen canal saludos de Chile 🇨🇱
Glad the video was helpful!
Awesome Vid! Hope you do a follow up on which bigger tires you get. Also a video on how you got the drum brakes colored black. :D
Haha, the drums are new. Toyota did the TSB to replace the rear axles for the brake vibration and did new drums and shoes as a courtesy.
I went with 1” taller tires. Kenda Klever AT2 265-70-17’s. I’ll try and make a UA-cam short later!
Super quick compared to others I've seen. I'm too scared to do it myself, however. Awesome video though.
Thank you! I'm sure if you have access to the tools, you'd be able to do it! Just don't rush.
Do you know if installing rear blocks will cause long term issues or anything ? I don’t tend to go off-roading
Nope, blocks have been a pretty regular way to lift most trucks and within reason (lift size wise) they don't cause issues.
Did I miss seeing the truck completed? Was there a before and after photo? Hmmm?
Nope you are correct. The after photo is in the thumbnail but I suppose that isn't very useful. The before I just assumed would look like any other TRD Sport.
@@ncv4708 I really enjoyed the video. I just wanted to see more. Everything you said made perfect sense without talking about the weather or your dog…. lol Thank you.
Haha thank you. I'll make sure to add before/after photos in future videos.
@@gsalemi1954 posted a before/after photo on my community tab!
Why do you need to replace the needle bearing after the lift? What goes wrong with it?
I wouldn't say anything goes wrong. But it exaggerates the very terrible tolerances of the factory CV axle vs the needle bearing on the drivers side of the differential when you change the CV angles. The result is an oscillating vibration you can feel in either the floorboard or steering wheel and if quiet enough you can hear it (super annoying). This isn't a failure, just more of a nuisance where the ECGS bushing closes up the tolerance and eliminates the vibration/oscillation.
Awesome
Thanks!
Hello nice job how is the truck now the right quality thanks
The ride quality didn't change much since it's still the same shocks.
Nice Job how is the ride quality?
It actually didn't change the ride quality much. The tires are what made the ride quality a bit more harsh.
Did you paint your rear drum breaks?
Nope, they were fresh drums from Toyota that were done part of a TSB.
Do you have vibrations on the driver's side???
Yes I did. Probably 90% of Tacoma owners who lift their trucks get this vibration from the needle bearing. I installed the ECGS bushing and it fixed the issue.
Did this install mess up the safety sense calibration ?
Not that I could tell. Everything has worked perfectly with the pre collision detection.
Any problem whit the lift kit?
Nope zero issues.
How l0ng did this take?
About 2 hours total.