Thank you!! I just bought a used 2015 GC Overland yesterday. Tried to update the software because the navigation wasn't working and got stuck in the endless loop. Called Uconnect support and they told me there was no way out of the loop and that I need a new "radio". This fixed it. AND!... It appears the navigation is working correctly. Time will tell but at least I got everything else back up and working properly.👊👊👊👊👊 Fist bumps all-around!!
I did this but my gps shows me in Texas and not Ohio. It told me it needed calibrated and to drive to an open area but when we did that…it didn’t update at all. Other than this…it fixed my problems.
I have a 2014 Jeep Cherokee Trail Hawk, I tried to install the version you used for your vehicle (16.33.29), apparently the installation was working fine, but a few minutes later I got a message saying the version is not for my Jeep :( I was frustrated, I tried turning the engine off and back on and magically the JEEP icon appeared on the screen and the uconnect system worked again! I checked the system version and it says it has the 18.45.01 version, I don´t know how it happened, but the only thing I can say is THANK YOU FOR ALL YOUR HELP! and thanks to the person that shared the link, user ID and password for downloading the file!
THIS MAN IS THE GOAT I had this issue and spent an hour reading through forums tried everything you can think of or have seen. How it “fixes” it is by using a Lowe version update file to trick the system into rebooting out of the update program. Because it’s a lower version as soon as it starts the update it realizes it’s a lower version doesn’t know what to do with it so it restarts back into the system. Because the update file for the newer version kept getting stuck before finishing it would boot back into the update program and not back into the system. Now you MUST realize at least for me the update got stuck at 11/14 meaning there’s at least 4 updates that were not installed. The software version is correct but at this moment I don’t know what wasn’t updated. The system is exactly the same as it was before besides gps saying it needs to calibrate and still have the issues I had prior to trying the update. Those 4 updates may not even have been needed but all I know is it’s 2 am and I can go to bed.
Trevor, I was so excited to find your post and appreciate the effort you put into this. My situation is exactly as you described and I feel sure this would resolve my issue. Unfortunately those of us finding the post as of this date no longer have access to the url as it has been taken down. Sounds like you may no longer have access to the file but if there was a way some of those in this post that successfully utilized the file could make this available where you could reference it in the comments others could take advantage and continue the benefit of this great find. Would appreciate anything you could do. Thank You.
mega.nz/#F!kURhTCbJ!uJhKPMyGiESbvQSDb33CvQ I found this site doing some more digging. there are instructions PDF on the site too. research the files before installing any software. I am no responsible if anything issues arise. I hear you can go to a dealership and pay a fee to have it fixed for $200 or more. but call dealership to confrim
Thank you!! I have had several countless night due to this boot issue,which lead to me just pulling the fuse. I was scheduled to take my 2015 Chrysler 200 to the dealer. I tired everything aswell I event took it apart. Now I can sleep again & not have my parent give me the death stare.
@@franky20112 I downloaded the previous version from the link in description. Put on a clear USB and then insert into port and it will do diagnostics automatically.
@@franky20112 did you download a previous version? If you look at the forum everyone has used a older version not the newest one. What step is it stuck on?
Your a life saver ! This worked on the first try been struggling with the radio for 5 days - dealership said the internals were fried - hopefully UConnect looks into fixing this
2017 Uconnect 8.4 with Nav... I CAN'T seem to find the file or resolution. screen keeps rebooting like every minute I cant even click on anything. the file links I found in the comments probably wouldnt work right? idk where to find them its all confusing
Hey Trevor. Just found your video. thanks for the post. I was wondering… was your screen saying wait 2-5 minutes on a black screen and then a white screen saying insert update usb ?
Hi There! I am in the usb loop. I've clicked on all the links of this comment thread to find the older software update. Do you happen to have the file still available?
unfortunately, I do not, the laptop it was on was cleaned out. The website shows a more technical approach. I have message on that forum many times trying to get that access again. The only files I have were from Uconnect site, which put me in that situation.
hello I have a problem, please help me solve it. I have a Jeep Grand Cherokee 2014, 3.6 petrol. the cassette player and the navigator do not open. on the screen it says insert usb. I don't know what to do
what's up trevor I am in an endless cycle, on the screen it appears to wait 2-5 minutes... and then a blank screen that says "Please insert usb update" The screen does not turn off even though I turn off the truck, I have tried a thousand and one shapes . I disconnected the battery and even disassembled the screen, put everything back together again and it's still the same.
I know frustration you feel. Did you download the older update file I had in the details? The newest version update gave me problems I had to use an older version to get the everything back to default. Worked in 20min.
@@alexismartell8802 I used this link and login www.mydrive.ch/www.mydrive.ch/ username: mygig@soxag Password: gasolio find the file name "UCONNECT_8.4AN_RA4_16.33.29_MY16.exe" and that had all the files needed for upload and got me out of the boot loop
hello I have a problem, please help me solve it. I have a Jeep Grand Cherokee 2014, 3.6 petrol. the cassette player and the navigator do not open. on the screen it says insert usb. I don't know what to do
the link is in description but not able to pull from that user it seems. Here is a technical link that explains it, but it is a bit detailed. I have another link of files I downloaded in the comments, but compare them to the Uconnect website. www.google.com/url?sa=t&source=web&rct=j&url=illmatics.com/Remote%2520Car%2520Hacking.pdf&ved=2ahUKEwjZsOGNl5nyAhWhGVkFHZy2AnAQFnoECAcQAg&usg=AOvVaw0NAi3a1eh-IRd3n1VHv-ys
My update goes good until Unit 2 to about 88% but then starts over? I have formatted my USB - seems I have more files from Uconnect website than what you show. Any guidance?
Yes the Uconnect website gave me issues, and i had to search net for other files. Sadly the website I found is not available. at 1:57 of the video I used only 3 files that were downloaded for a previous version, which updated my system to newest version. Hope this helps a little
@@TrevorChap I was able to delete all of the files on the USB leaving only the update file - it worked! Thank you so much for your video - I hope this helps others DIY software updates. woohoo!
Here is G-drive with files I last used, but I think these were from Uconnect site and that gave me problems. Please compare what you get from official Uconnect site. If you system goes into boot loop I am not responsible. Check with a local dealer if they can do the upload so you don't have to pay for a new radio like they tried to charge me.
I was able to fix my boot loop by checking the downloaded files against the listing they provided in the instructions. The 18.45 update did not have to downloaded docs correctly labeled as .bat.exe .log. Once I updated the files to add that it worked. Hope this helps someone!!
can you explain or make a video how you did this? i feel like the newer version files isnt working on my RAM 2014 update and now its stuck on the loop screen
@@TrevorChap I used an 8GB Gigastone that I found at Ace Hardware. Formated it to FAT32, and did the extraction, when i put it in the Uconnect, it loaded the first unit, reset, and whalla, I was back in business.
I am having the same issue but in my 2020 Jeep Wrangler. Their PDF mentions many Jeep models except Wrangler. I wonder if uploading that driver will mess with my Uconnect since it is not on that list. I can't seem to find any other solution though.
@@TrevorChap yeah I’m part of those forums. Just spent the whole day trying to find something but there’s nothing out there unfortunately. Anyways, thanks for the tips and helping others! ✌️
If you look at previous comments I have set a link with files i had on my drive. Double check with manufacturer website if they are the same files. Please be warned that manufacturer website has had issues with updates.
@@TrevorChap thank you for posting this, was able to get out of loop mood FINALLY. Now just to fix the navigation, xm and phone issue. Greatly appreciate you. 🙏🏾
you look in the forums, but upon further inspection seems the files are not available, just a PDF which gives more technical way to do it. There is a google drive link in the comments, but please compare to Uconnect files to make sure they are not repetitive. Disclaimer: I am no responsible if any issues happen upon the doing the upgrade. If you are unsure please reach out to a local Ram professional dealer on what steps to take.
Hello please i need your help I have ram 2014 i tried to update from 17 to 18 but i see sierra wireless bolo file install failed How can fix it or if i can back to the 17 version
Yes happy to help! The description in the video shows a link to go to where you can get the files. Download the older version into a thumb drive, and follow upload instructions.
You can go to manufacturer website. I have put a link in comments with other people who have asked, but make sure the files are not the same. Double check before doing that update.
does this work for a chryslter pasifica 2017 ? I am on day 2 of this endless error (please insert update usd) Any chance you have a direct link to the file
@@eocobby721 I cannot confirm. Check Ram 1500 forums. It is all Uconnect, so I feel it might, if not then you would potentially be in a boot loop scenario
So your friends link for downloading that file has been downloaded so much it will let you download it anymore. Is there any other way to download that file
Can anyone Dropbox me the file. The site login no longer works. I really need help getting the files cause my cars stuck in the boot loop of death and my wife needs the Jeep asap. Please help
@@robandkampenny181the files on the drive link should all correspond. YOu can go to manufacturer website and double check if any files are missing. I used these 5 when i did update. Again double check
Should only be in one folder all files. On the forum website I don't see access anymore sadly. There is a PDF on there to explain, but it's a little more technical. You can try to contact the user on there.
Yes check which version you currently have and the follow the link/forum page. Do some extra research before installing so you can avoid the boot loop problem
about 10 min, i just sat there and w atched tik tok and then it went to the next part, some people say you have to insert the usb before you turn the car on. i did it after the car was on already @@karamcentarfer4730
There is no Byte file to create, simply download the file into USB drive and then plug into vehicle USB drive. Consult manual or online forums for proper procedure.
@@molecki1 you installed the 16.11 and the Boot Loop is gone? I am not sure process on Uconnect for Chrysler. Check the listed site and see if you can use those other updates. Also use Chrysler 300 forums and search "Uconnect boot loop", because I came across other vehicles outside of Jeep with same problem
its a dead fan like most of the 500ls and 500s, the fan in the radio dies, then the radio gets to hot and then shuts off tries to turn back on, gets too hot rinse and repeat till eventually it will die for good.@@TrevorChap
That sounds like something outside the Uconnect update. I'd have diagnostic done on the computer system and see if you can maybe do a reset, but check with a mechanic first. @@newmeadam
I saw it do it, after I tried the firmware deal, I appreciate the help but its a known issue Ive got two choices wrecked fiat radios or pay 300 for a harness wire @@TrevorChap
www.driveuconnect.com/support/software-update/ready-to-update.html You can go to this website to get the files. But be warned this is what put my vehicle in the "boot loop" and I had to research where the previous one was at. I am not able to find that older file. The forum shows what they did with programming, but I am not sure how to do that. Maybe message them and see if they have access to send correct EXE file
@@marisacarrillo9398 I went back to that forum and the website provided shows the user did not have a subscription. Id say reach out to them on the forum and see if they can send you the file.
mega.nz/#F!kURhTCbJ!uJhKPMyGiESbvQSDb33CvQ i found this site, but please research the files and forums before uploading any software. I am not responsible if any issues arise. Best of luck!
Hey Trevor is it possible for you to send me the files in the zip. I tried getting it from my Sri e but it says the account is suspended do to nonpayment. I would really appreciate it. Let me know and I will send you my email address
Thank you!! I just bought a used 2015 GC Overland yesterday. Tried to update the software because the navigation wasn't working and got stuck in the endless loop. Called Uconnect support and they told me there was no way out of the loop and that I need a new "radio". This fixed it. AND!... It appears the navigation is working correctly. Time will tell but at least I got everything else back up and working properly.👊👊👊👊👊 Fist bumps all-around!!
Fists bumps back at you! congratulations!
I did this but my gps shows me in Texas and not Ohio. It told me it needed calibrated and to drive to an open area but when we did that…it didn’t update at all. Other than this…it fixed my problems.
I have a 2014 Jeep Cherokee Trail Hawk, I tried to install the version you used for your vehicle (16.33.29), apparently the installation was working fine, but a few minutes later I got a message saying the version is not for my Jeep :( I was frustrated, I tried turning the engine off and back on and magically the JEEP icon appeared on the screen and the uconnect system worked again! I checked the system version and it says it has the 18.45.01 version, I don´t know how it happened, but the only thing I can say is THANK YOU FOR ALL YOUR HELP! and thanks to the person that shared the link, user ID and password for downloading the file!
You’re welcome and congratulations!
Eorking for me too! Grand cherokee 2014 limited
what’s the persons user id i can’t find that version for myself
Hi do you have the link to update my uconnect
THIS MAN IS THE GOAT
I had this issue and spent an hour reading through forums tried everything you can think of or have seen. How it “fixes” it is by using a Lowe version update file to trick the system into rebooting out of the update program. Because it’s a lower version as soon as it starts the update it realizes it’s a lower version doesn’t know what to do with it so it restarts back into the system. Because the update file for the newer version kept getting stuck before finishing it would boot back into the update program and not back into the system. Now you MUST realize at least for me the update got stuck at 11/14 meaning there’s at least 4 updates that were not installed. The software version is correct but at this moment I don’t know what wasn’t updated. The system is exactly the same as it was before besides gps saying it needs to calibrate and still have the issues I had prior to trying the update. Those 4 updates may not even have been needed but all I know is it’s 2 am and I can go to bed.
Just wanted to say THANK YOU so much for the help. I was seriously pissed about having to possibly buy a new radio.
Happy to help, and congratulations to you man
Holy shit thank you and the guy that you got this info from! I thought all hope was lost for my 2014 Durango and I did this and it works!
I feel your pain, and congrats on your win! Happy to help
Thank you for saving me a lot of money ! Although it didn’t update the system it got me out of the loop and for that, you are much appreciated!
If you used the earlier versions sometimes it actually will give you most recent version. Congrats on getting out the loop!
Trevor, I was so excited to find your post and appreciate the effort you put into this. My situation is exactly as you described and I feel sure this would resolve my issue. Unfortunately those of us finding the post as of this date no longer have access to the url as it has been taken down. Sounds like you may no longer have access to the file but if there was a way some of those in this post that successfully utilized the file could make this available where you could reference it in the comments others could take advantage and continue the benefit of this great find. Would appreciate anything you could do. Thank You.
mega.nz/#F!kURhTCbJ!uJhKPMyGiESbvQSDb33CvQ
I found this site doing some more digging. there are instructions PDF on the site too. research the files before installing any software. I am no responsible if anything issues arise. I hear you can go to a dealership and pay a fee to have it fixed for $200 or more. but call dealership to confrim
Thanks you!! Uconnect came out of bootloop in less than 5 minutes, it honestly works better now than before I tried to upgrade, nav works now too!!!
Congratulations!
Thank you!! I have had several countless night due to this boot issue,which lead to me just pulling the fuse. I was scheduled to take my 2015 Chrysler 200 to the dealer. I tired everything aswell I event took it apart. Now I can sleep again & not have my parent give me the death stare.
Congrats to your victory and avoiding the death stare!
I confirm works Chrysler Pacifica 2017. Thank You !
You are welcome!
Can’t say THANK YOU & dj enough! Got what I needed to get out of the boot loop!!
Welcome and congratulations!
how did you do it? i can’t seem to get mine out.
@@franky20112 I downloaded the previous version from the link in description. Put on a clear USB and then insert into port and it will do diagnostics automatically.
@@TrevorChap i downloaded the same one and nothing, i get the insert the usb with update screen and then wait 2-5 minutes but nothing ever happens.
@@franky20112 did you download a previous version? If you look at the forum everyone has used a older version not the newest one. What step is it stuck on?
Your a life saver ! This worked on the first try been struggling with the radio for 5 days - dealership said the internals were fried - hopefully UConnect looks into fixing this
I feel your pain. Congrats on the victory! After talking to them on phone, I doubt they will or know how
2017 Uconnect 8.4 with Nav... I CAN'T seem to find the file or resolution. screen keeps rebooting like every minute I cant even click on anything. the file links I found in the comments probably wouldnt work right? idk where to find them its all confusing
Hey Trevor. Just found your video. thanks for the post. I was wondering… was your screen saying wait 2-5 minutes on a black screen and then a white screen saying insert update usb ?
I am having the same issues as this. Have you figured it out? i try to get into the Mydrive but it says invalid password/user
Hi There! I am in the usb loop. I've clicked on all the links of this comment thread to find the older software update. Do you happen to have the file still available?
unfortunately, I do not, the laptop it was on was cleaned out. The website shows a more technical approach. I have message on that forum many times trying to get that access again. The only files I have were from Uconnect site, which put me in that situation.
hello I have a problem, please help me solve it. I have a Jeep Grand Cherokee 2014, 3.6 petrol. the cassette player and the navigator do not open. on the screen it says insert usb. I don't know what to do
Hello Trevor. Can you help with the update files? Can you send me the link? I stuck when I tried to from 17 version 18.45. Thanks in advance.
Yea the link is in description of this video. Click on it and follow directions provided
what's up trevor I am in an endless cycle, on the screen it appears to wait 2-5 minutes... and then a blank screen that says "Please insert usb update" The screen does not turn off even though I turn off the truck, I have tried a thousand and one shapes . I disconnected the battery and even disassembled the screen, put everything back together again and it's still the same.
I know frustration you feel. Did you download the older update file I had in the details? The newest version update gave me problems I had to use an older version to get the everything back to default. Worked in 20min.
Where did you get the SwdlLog.txt file from? When I decompress, the first two appear
@@alexismartell8802 I used this link and login
www.mydrive.ch/www.mydrive.ch/
username: mygig@soxag
Password: gasolio
find the file name "UCONNECT_8.4AN_RA4_16.33.29_MY16.exe" and that had all the files needed for upload and got me out of the boot loop
hello I have a problem, please help me solve it. I have a Jeep Grand Cherokee 2014, 3.6 petrol. the cassette player and the navigator do not open. on the screen it says insert usb. I don't know what to do
I have downloaded the file and copied to my flash drive and nothing happens. Is there something I am doing wrong? Am I missing a step?
When you insert USB, does it automatically start upload? Make sure there are no folders on USB,just the files.
what website? There isn't a download (or I can't find it) link.
the link is in description but not able to pull from that user it seems.
Here is a technical link that explains it, but it is a bit detailed. I have another link of files I downloaded in the comments, but compare them to the Uconnect website.
www.google.com/url?sa=t&source=web&rct=j&url=illmatics.com/Remote%2520Car%2520Hacking.pdf&ved=2ahUKEwjZsOGNl5nyAhWhGVkFHZy2AnAQFnoECAcQAg&usg=AOvVaw0NAi3a1eh-IRd3n1VHv-ys
My update goes good until Unit 2 to about 88% but then starts over? I have formatted my USB - seems I have more files from Uconnect website than what you show. Any guidance?
Yes the Uconnect website gave me issues, and i had to search net for other files. Sadly the website I found is not available.
at 1:57 of the video I used only 3 files that were downloaded for a previous version, which updated my system to newest version. Hope this helps a little
@@TrevorChap I was able to delete all of the files on the USB leaving only the update file - it worked! Thank you so much for your video - I hope this helps others DIY software updates. woohoo!
@@kellymcglynn8355 incredible to hear and congratulations! Thank you for sharing this and help others!
Can you send me the link I can fine it I’m just trying to get the part you drag to the usb
Here is G-drive with files I last used, but I think these were from Uconnect site and that gave me problems. Please compare what you get from official Uconnect site. If you system goes into boot loop I am not responsible. Check with a local dealer if they can do the upload so you don't have to pay for a new radio like they tried to charge me.
drive.google.com/drive/folders/1c_x-XQFhEvkl758g8g-cJ-J0O-_45tsI?usp=drive_link
I was able to fix my boot loop by checking the downloaded files against the listing they provided in the instructions. The 18.45 update did not have to downloaded docs correctly labeled as .bat.exe .log. Once I updated the files to add that it worked. Hope this helps someone!!
Appreciate the update on information, and help it will provide!
can you explain or make a video how you did this? i feel like the newer version files isnt working on my RAM 2014 update and now its stuck on the loop screen
It appears that user account to get the files has expired, does anyone have the files on hand?
What is the USB you used? Does it matter?
I used a standard 16gb. The files were not that large, but I was just being safe
@@TrevorChap I used an 8GB Gigastone that I found at Ace Hardware. Formated it to FAT32, and did the extraction, when i put it in the Uconnect, it loaded the first unit, reset, and whalla, I was back in business.
@@bernardmartin7709 congratulations on it working! I know how that must have felt
What year is your grand cherokee? I tried this on my 14 without luck :(
I have a 15 Grand Cherokee
@@TrevorChap thanks man, unfortunately is not working on mine :( I will try to continue finding a solutiln to the nightmare 😢
@@benja2a maybe check out the forum if anyone else is having the same issues. They do have other versions, but I am not sure how they will work
I am having the same issue but in my 2020 Jeep Wrangler. Their PDF mentions many Jeep models except Wrangler. I wonder if uploading that driver will mess with my Uconnect since it is not on that list. I can't seem to find any other solution though.
They have Jeep forums you can look on and see what problems if any others have had with updates. I checked forums and was how I found this site
@@TrevorChap yeah I’m part of those forums. Just spent the whole day trying to find something but there’s nothing out there unfortunately. Anyways, thanks for the tips and helping others! ✌️
Hello! Do you have the files? I'm really very frustrated with updating my radio, thank you
If you look at previous comments I have set a link with files i had on my drive. Double check with manufacturer website if they are the same files. Please be warned that manufacturer website has had issues with updates.
I have never used youtube before. I would like a copy of your software so I can stop my uconnect loop. how do i get a copy or download this file
Hi the link is in description with guide where to go.
Hello , my radio screen is frozen, it's not making full start will you help me
if you look through previous comments the files you can double check and compare to what manufacturer requests tto download
Where can I get the link from?
The link is in the description, along with the username djmjr77 to find with instructions. Best of luck!
@@TrevorChap thank you for posting this, was able to get out of loop mood FINALLY. Now just to fix the navigation, xm and phone issue. Greatly appreciate you. 🙏🏾
@@zeus2728 Congratulations, and happy to help!
I clicked the link, but i'm not sure what I'm looking for...I have a 2014 Ram 2500.
you look in the forums, but upon further inspection seems the files are not available, just a PDF which gives more technical way to do it. There is a google drive link in the comments, but please compare to Uconnect files to make sure they are not repetitive. Disclaimer: I am no responsible if any issues happen upon the doing the upgrade. If you are unsure please reach out to a local Ram professional dealer on what steps to take.
Hello please i need your help
I have ram 2014 i tried to update from 17 to 18 but i see sierra wireless bolo file install failed
How can fix it or if i can back to the 17 version
There is link in description. The file is in video.
I used an older version update and it fixed it right up.
Trever, I am having the same issue that you did, I can not find this file, could you e-mail me a copy please?
I found the file, and it actually frickin worked. Thanks man, I owe you one!! now to figure out how to calibrate the Navigation system.
@@bernardmartin7709 congratulations!
im still having issues with this can you help me out Trevor im going crazy fixing this
Yes happy to help! The description in the video shows a link to go to where you can get the files.
Download the older version into a thumb drive, and follow upload instructions.
Muchas gracias,de corazón pude arreglar la radio de mi dodge charger rt,gracias 💪🏾💪🏾✌🏾
de nada!
Site in comment with login is expired. Is there any other site which can provide older version?
drive.google.com/drive/folders/1X_uk39S7pkbk0VqqTkNR68A1QzrBReq1?usp=sharing
I located old files in my downloads.
Try this drive link:
***
Disclaimer: I am not responsible if any issues arise from upload. Please double check with vendor on upgrade files and compare
how can i download the software? where do i find it??
You can go to manufacturer website. I have put a link in comments with other people who have asked, but make sure the files are not the same. Double check before doing that update.
does this work for a chryslter pasifica 2017 ?
I am on day 2 of this endless error (please insert update usd)
Any chance you have a direct link to the file
Really, you deleted the instructions in the comments
Uconnect 8.4 2013
- 2018 up > 2013-2016 Models
>Nord America RA3 - RA4 > MJ 16 5 files
download this file:
CONNECT 8.4AN RA4 16.33.29 MY16.exe
This should help. Not sure how instructions got deleted
@@TrevorChapwill this work for 2014 Ram 1500?
@@eocobby721 I cannot confirm. Check Ram 1500 forums. It is all Uconnect, so I feel it might, if not then you would potentially be in a boot loop scenario
So your friends link for downloading that file has been downloaded so much it will let you download it anymore. Is there any other way to download that file
I just tried the link, went to the login provided and was able to bring up the files easy. It is working just fine
I just want to say thank you and your friend it works
I had to use a different computer to get the file
@@jaminanderson5094 It is more the other person. I am just sharing what I found if it helps someone out there save $1000 like it did me.
Can anyone Dropbox me the file. The site login no longer works. I really need help getting the files cause my cars stuck in the boot loop of death and my wife needs the Jeep asap. Please help
just take the f80 fuse out fornthebuconnect....and do lots of reserch
Im having trouble finding this link
Link is posted in description. Look for the username as well with instructions
Are you able to put the files you used on google drive and link it?
drive.google.com/drive/folders/1X_uk39S7pkbk0VqqTkNR68A1QzrBReq1?usp=drive_link
DISCLAIMER: I am not responsible if any problems occur from upgrade. Please check with Uconnect website on files and compare, or call them.
@@TrevorChapwhich files are used? The file names don’t correspond with the video
@@robandkampenny181the files on the drive link should all correspond. YOu can go to manufacturer website and double check if any files are missing. I used these 5 when i did update. Again double check
@@robandkampenny181
This whole thing is a confusing mess. He just makes it worse..
How do I download the file when I click on the link?
Your a life saver!!!! Just saved me about a grand!!!!
@@richieamorosi8284 happy to help and congratulations!
With the new download link what folder is the file in ? Besides for the magic files the rest seem like all map software
Should only be in one folder all files. On the forum website I don't see access anymore sadly. There is a PDF on there to explain, but it's a little more technical. You can try to contact the user on there.
Work with grand cherokee limited 2014?
Yes check which version you currently have and the follow the link/forum page. Do some extra research before installing so you can avoid the boot loop problem
Now it works, it took me half a day. I did it just like you, with the same version you used. I have a 2014 gc limited.
@@nathanieljoa2211 congrats on update going through!
Mine was switching from connect usb to wait 2-5 min a few times but I just let it do its thing and later switched to the installing screen and done
How long did it take? I let it sit for about 20 min and still nothing.
about 10 min, i just sat there and w atched tik tok and then it went to the next part, some people say you have to insert the usb before you turn the car on. i did it after the car was on already @@karamcentarfer4730
Hi, can you help me with byte S file? Just how create? Thx in advance.
There is no Byte file to create, simply download the file into USB drive and then plug into vehicle USB drive. Consult manual or online forums for proper procedure.
@@TrevorChap ok, THX, but you know on your video i saw 3 files on USB, in my i can see two...hm
@@inspektorgadzet3311 There should be a zip file and will have all needed files for the install
So I have to download an older version
That’s what I did. And it worked just like another user said it would. Saved me from buying a new radio from dealership
Can someone send me the link I can’t find it
forum.xda-developers.com/t/uconnect-8-4-ver-17-11-07-trying-to-root.3843945/
i don't see the necessary files are available on the website mentioned in the forum now.
drive.google.com/drive/folders/1X_uk39S7pkbk0VqqTkNR68A1QzrBReq1?usp=drive_link
Disclaimer: I am not responsible if any problems occur on upgrade. Please compare files with uconnect online to be safe before proceeding.
If you have any questions send me a DM
Can you help me
Mine gets to unit 10 and stops on apps at 20 percent
@@paulmcintosh3788 what version of upgrade are you using?
So maybe you could help me, my uconnect still restrting and loop. Chrysler 300c 2017 with Panasonic. I try to install update to CR 16.11 and ist gone
@@molecki1 you installed the 16.11 and the Boot Loop is gone? I am not sure process on Uconnect for Chrysler. Check the listed site and see if you can use those other updates. Also use Chrysler 300 forums and search "Uconnect boot loop", because I came across other vehicles outside of Jeep with same problem
I wonder if they have the same for fiat 500ls lol
you can check the Uconnect website to compare the files to make sure.
its a dead fan like most of the 500ls and 500s, the fan in the radio dies, then the radio gets to hot and then shuts off tries to turn back on, gets too hot rinse and repeat till eventually it will die for good.@@TrevorChap
That sounds like something outside the Uconnect update. I'd have diagnostic done on the computer system and see if you can maybe do a reset, but check with a mechanic first. @@newmeadam
I saw it do it, after I tried the firmware deal, I appreciate the help but its a known issue Ive got two choices wrecked fiat radios or pay 300 for a harness wire @@TrevorChap
Can you send me the file 😢
www.driveuconnect.com/support/software-update/ready-to-update.html
You can go to this website to get the files. But be warned this is what put my vehicle in the "boot loop" and I had to research where the previous one was at. I am not able to find that older file. The forum shows what they did with programming, but I am not sure how to do that. Maybe message them and see if they have access to send correct EXE file
That’s where I’m at right now in the loop ☹️
@@marisacarrillo9398 I went back to that forum and the website provided shows the user did not have a subscription. Id say reach out to them on the forum and see if they can send you the file.
mega.nz/#F!kURhTCbJ!uJhKPMyGiESbvQSDb33CvQ
i found this site, but please research the files and forums before uploading any software. I am not responsible if any issues arise. Best of luck!
anyone who needs the files to fix this please reply to this comment with your email
Possibilité de me les envoyer si vous plais ?
Hey Trevor is it possible for you to send me the files in the zip. I tried getting it from my Sri e but it says the account is suspended do to nonpayment. I would really appreciate it. Let me know and I will send you my email address
If you look at previous comments I sent a drive link. But I think these are files from the Uconnect website. Please go to their site and double check