thank you so much sir mujhe ye cheeze pta tha but inko troubles shooting kehte h ye nhi pta tha me jb v koi v analysis krta hu insb cheezo ka dhyan rakhta h it's very helpful for whole analysis thank u
You can add mobile phase if it is original... means it is from the same stock of mobile phase, otherwise if you prepare new one, RT shifting may happen
why we do hplc calibration ?. always start the sequence 1st sst run then found the system are ok & not . then find are system is ok but why we do calibration ?
Thank you very much for informative video. Can you please tell is it possible different mobile phase cause shifting of peaks of same drug ( mobile phase 0.1% TFA and 1% AA they are causing shifting of Rt of PGA polymer)
Retention factor, theoretical plate, resolution, tailing factor is system generated.but definitely there will be formula.then only we are providing formula to the system.what is that formula
thank you so much sir mujhe ye cheeze pta tha but inko troubles shooting kehte h ye nhi pta tha me jb v koi v analysis krta hu insb cheezo ka dhyan rakhta h it's very helpful for whole analysis thank u
Sir hr column ki washing same Hogi? Jesy sugars detector column hai , us ko be aisy hi wash kren?
during analysis can i add mobile phase if volume is lower ??
YES BUT ADD CAREFULLY AVOID AIR BUBBLES.
Ok sir thank you 😊
You can add mobile phase if it is original... means it is from the same stock of mobile phase, otherwise if you prepare new one, RT shifting may happen
yes added m.p. when your system is alter and then added blank and continue
Hello sir, can u tell me why pH is 14 not 15 or 16..please sir
Water disociation constant is 14
Dear sir,
How to wash column in right direction or back direction...
its depend on injection
Always use right direction for column safety.
why uses regent in mobile phase what role of pain mobile phase
plz watch my HPLC series.
Very informative video 👍,sir can you guide me about peak fronting,what are main causes of fronting and how we solve this
Sir g .....agar ek column n ek hplc me 3 product ek hi bar run karna possible hai ki nhi ?????
RS test me main peak se pehle or baad me kuch choti choti peak aati hai kyo?
why we do hplc calibration ?. always start the sequence 1st sst run then found the system are ok & not . then find are system is ok but why we do calibration ?
Sir kis condition me isocretic and gradient mode use karte hai
Please watch my HPLC series.
@@prof.karanajaygupta hello want to know about HRMS
Please define complete trouble shooting in HPLC as RT shift and buffer solution as so
Can we minimize telling factor of any column ? plz tell sir
NO ,ONLY SPECIFIC COLUMN .
Sir g agar harek product k liye individual column use kare company toh mujhe lgtaa hai ki kitne kitne thak jayegaaa...... practically yaisa nhi hai
Dear Professor , Thank you so much for your valuable information.
Mobile phase kaise calculate kre..kitna lge ga
flow rate × run time × totle injection=
Wonderful sir , thanks
Sir hplc par new drug ke liye method development kese karte hai
Thank you very much for informative video. Can you please tell is it possible different mobile phase cause shifting of peaks of same drug ( mobile phase 0.1% TFA and 1% AA they are causing shifting of Rt of PGA polymer)
Why use gradient method in hplc
Informative video Dr sab.
Very informative sir, Thank you so much 😇
Hello kaun se group me job krti ho
Very good content and delivery in easy language. 👍
Sir online class hota hai
Ryt Sir thanks for knowledge dene ke liye
Hye sir RSD fail hone ke aur bhi reason ho sakte kya?
improper filling of vails and contamination, system not properly flushed and column not saturated
Sir please make video on caffeine analysis of beverage.
Nice video sir. Please make video on GC trouble shooting
nice explanation , very helpfull video
Sir void volume or bad volume kya hota hai kaise calculate karte hai please eske liye bhi ek video bnao
A\
Very nicely explained sir...👍👍👍👍
Please solution for HPLC high pressure coming .
Thank you sir.
welcome.
Sir methanol se last me cleaning hogi to silica dry rahegi na
Pharma me water methenol 8:2 hota hai
Sir please iso 17025 ke topic par vedio banaiye bahut popular hogi max analysts ki ye problem h
thanks i will make .
Hii Sir, Myself vishakha
What precautions to be taken while using gradient mobile phase to have proper baseline
Filter mobile phase and saturate column by mobile phase for 1 hour .
@@prof.karanajaygupta is there any limit for drift in baseline? Acceptance criteria?
No but if seen drift and peak is not acceptable please change column.
How to remove Carry over peaks, extra peaks, solve high baseline and get stable baseline????
insert blank and when u start tha analysis saturated the column with m.p. atlest 30 min
Nice information.. Sir
welcome.
Please ellaborate isocratic and gradient point.
Thank you sir
Welcome
Sir, incidents, deviation,CAPA - defination and no properly information but , very important
Thank3
Air bubble come in my HPLC system
how to remove bubble ..?
what dependent of ph in mobile phase
very important.
PH is very important for ionising compound, Acidic compound is more retained in acidic PH, Basic compound is more retained in basic PH
Good information
thanks.
Thank you Sir grateful information
Can u plz tell us hplc calibration.. Really need of this
Video will release on April May.
isi 3 video hplc banaiye aur usme clear kar dijiye mai apka sara vido dhekta hu
thanks for suggestion.
sir pick hota kya hai pick kya batata hai
pick mean graph.
RT variation acceptable range Kitna Hona chahiye
RT Ka percent RSD 1 percent
Thanks a lot sir
#EnglishExcel
sir please explain negative peak
Sir can we study biological molecules by GC MS???
Thanks sir, nicely explained 👌
Mobile Phase Filter karna kitna imp hai...?
very important it directly relate to your column.
Sir can you tell me how to calculate retention factor, theortical plate, resolution and tailing factor.
It is system generated no need to CALCULATE.
Ok.. Sir
Any formula for this?
Retention factor, theoretical plate, resolution, tailing factor is system generated.but definitely there will be formula.then only we are providing formula to the system.what is that formula
Good sir
Thanks sir
tnx sir ji
Sir Empower Software Method and Integration Operation video please!!!🙏🙏
I already made video on that plz check.
@@prof.karanajaygupta Ok thank u sir...i will check👍
Wash column with water and acetonitrile (30:70) for best column life
Very imp point sir, thanks sir
tq
Thank u sir😊
Sir apki teaching me romance hai..
How to resolve pressure fluctuations in hplc ?
By doing purging (twice) with 10ml
Please activate English subtitle
Thank u so amuch
/
Thank you sir.
Most welcome
Thank you sir
Welcome
Good sir
Thank you sir ❤️
Thank You Sir