Budget 3 Piece BBS Wheels Build | Part 1: Splitting the 2 Piece Style 5s
Вставка
- Опубліковано 2 жов 2024
- I build some monster 3 piece BBS wheels today by hand for the e30, using mostly tools we all have. Check it out!
SHIRTS! SHIRTS!- teespring.com/....
---------------------------------------------------------------
Facebook- goo.gl/kFrmw6
InstaGram- Maxwell.e30
---------------------------------------------------------------
Songs used in order of Appearance
Crying - DJ QUAD
Good For You - THBD
ell Me About My Life - Goblin Mashup
If you spray some wd40 on the aluminum and your sanding disk it won't clog up as much get some more time with each disk
Uh yeah, Bavaria!
Don't you need something like a gasket or some sillicone to seal the rim ? these cold connections cannot be airtight right ?
usually people put a seal over to keep it airtight yes...
Like a rubber strip on the inside over the seems ?
ua-cam.com/video/EH9BsuZd7Z0/v-deo.html guess this will show in a better sense
Yes this will be covered in later videos in this series, but they are sealed after assembly.
I keep coming back to this video. Watched it 50 times now.
And I thought taking apart my Style 42s was sketchy, at least I didn't break out the grinder. Very impressive work as always!
style 42's arent welded. its common for some 3 piece wheels that are OEM to be welded together. a lot of the Japanese 3 piece wheels are welded. helps them stay sealed over time.
Yeah I know, the 42s are two piece. I was just sketched out by splitting them apart to refinish them and putting them back together. Needless to say I was a little nervous the first drive after putting them back together, but all is good today.
I torqued mine down to spec and was a little weirded out but, after about 5 minutes I was good.
My mechanic wants to buy my e24 rims to chop up into 3 piece rims
Good luck getting a decent stretch tyre on
The only thing I don’t get is that there is no groove on the reverse side of the wheel centre so I’m not sure how you keep the rear barrel aligned. I feel like once you put weight on that, it will shift slightly. Let me know because I’m interested in doing this
Before you try and mount up anything, have a tyre shop balance each ring first otherwise you'll never true your wheels
What are you doing for the valve stem?
I'm considering moving it to the inside of the wheel!
Do u think its fine to run these reverse lip for track/ aggressive street driving
I have a 528e and want to do a manual swap. Any insight will be greatly appreciated
ive seen about 3 diferent wheels on this car......what wheels are actually on this car?
Good job.
Does anyone know if any other lip would fit?
can i put my bbs center caps on ARE rims???
Will bbs rs lip fit on them?
So 9 up front and 12 in the back?!? 😲
Guanghzou Jova car Accessories Co.,Ltd. is a professional custom wheel manufacturers, 6061-T6 forged aluminum wheels. We custom made high performance 2 piece wheels(www.jovawheels.com/two-piece-series_c16) and 2 piece rims for suv, off-road, racing car, sport car, from 18" to 24". We do 2pc welded wheels & forged wheels with rivets. Warranty: lifetime warranty for forged wheels.
Is it dangerous doing something like this?
8" is not enough but 12" is too much.
They look nice. You going to paint them and or polish them?
Nice videos...Just got a new subscriber!
Impressive work !🤩
Quick question on he solo werks.
How satisfied are you with them ?
Cheap and very low. Fitment was pretty good considering its for the wrong car. the thing i like the least is that rear shocks have a shitload of travel unlike my BCs that were adjustable.
Got it! So would you recommend them ? Probably not huh
For the price they are far better than the alternatives man.
This is a cool way to do on the cheap But it looks like your going have a really hard time stretch a tire on it the iner bead is short
I swear at 7:04 I can hear the lady sing 'Ive been sanding my wheels'
*Spinnin I think
@@BlOOD_RAV3N ah, makes sense. still relates to the video haha
can you do this with any rim? or do i need the 1 with the screws, i;m trying to widen my amg rims,thanks
What grit sandpaper did u use? I also seen you rheeming the edges what tool did u use? I just purchased some style 5s because you got me so hype and inspired
I'm looking forward to the other parts of this mod.
I know it converted but most 3piece has air stems I didn’t see none in this vids
How much n where did u get the lips ? Turned out sickkk
Look nice what sealant do you plan to use? I would used Urethane for windshields but maybe you ha e some idea up you’re sleeve
I think the inner rim is gonna rub against your suspension real bad. Might not even be able to mount it on the hub
Great work, I want to do something like that for my Camaro
Holy this is genius
Does anyone know if they will clear brembo brakes?
Not a hater, but to big diffrence between 8inch/12inch rims
Yolo 4LYFE as in front and rear? I think you’re misunderstanding what I’m doing then.
Definitely not running staggered 8/12
I would never pass any inspection with these ryms here in germany :(
Luca Rietzler You can pass the inspection first, then after the inspection put the modified rims! :)
technopro 2000 this might be working but as soon as you get checkt by the police or even get in to an accident, you're in trouble.
As long as i can find a nice an legal solution, i'm not taking any risk ;)
seems like these would be hell to try and balance
Bro where do you get the money for all this?
I work, a lot.
EuroGarage are you in college too?
Detailing Finesse technically yes.
🤤 are those gonna fit under the fenders? Are you gonna chop them up too?
In theory couldn’t you attach the lip & barrel together, then mount the face behind them both to gain a few extra mm’s off negative offset?
Greasy Style yes this will all be covered. It all comes down to fitting it in there.
YOU'RE MAD, JUST WITH AN ANGLE GRINDER LIKE THAT....LOVE IT...
What size hardware are you using to rebuild the 3 piece?
Where did you get the barrels?
oh i see. so you're using 2 inner barrels
How much would u charge 2 do my wheels
Heart made.
Poor red IKEA rug 😭
Why did you cut the outer lip off doesnt it come off when you unbolt it?
Timothy Berlinski not on 2 piece wheels.
EuroGarage oh they only come apart on 3 piece wheels. Hmmmm i have some BBS wheels one is bent, not sure if they are 2 or 3 piece. On my range rover, not even sure if they are OEM
Love it need more
hella wide
I hope you didn't heat the aluminium too much 😬
God dam.... those look good👍🏻👍🏻