Hey powerfulukltd. I just installed this kit and fog lights are not working. All other lights and functions are ok, but fog lights are not turning on(indicator on dash is turning on/off properly). There is no message on dash. Any idea what could be a trouble there? I have 2008 l322 without any other upgrades.
I have installed these but I went to 2010 lights before I installed the circuit board and I still have the issues (apart from permanent fog lights) is it just a case of resetting the rear light warning codes in the cars brain and then it works like it should or are my lights just stuck like this? Thanks.
I’ve got them fitted on a 2003 RR Vogue, indicators flashing quickly, and a message about checking the fog lights. Not a problem with the message on dashboard, but indicator annoys me. Ordered resistor for indicator. Fingers crossed.
Yes i can say that ... i can also say "she sells sea shells on the sea shore" At 3:37 in the video i do say "super keen" people can fit the circuit inside the car... Or you can just pump the finished heat shrunk module full of silicone.
I bought it, connected it. The fog lights don't work. But there's no 12V signal on the yellow/black cable either. When I connect 12V externally to Fog, it doesn't work either, Of course the Fog indicator light is on.
Odd - the Yellow Black is the fog light - are you connecting 12V to the input side or the output side of the board ? If it is to the output side of the circuit board then the fog light should be on...
Hi you can purchase here but we are waiting for some more capacitors so limited stock at the moment - more coming this week ! www.powerfuluk.com/range-rover-l322-led-rear-light-wiring-fix-05-09-cars.html
Sure do www.powerfuluk.com/vehicles/range-rover-full-size/l322-vogue-2006/2010-conversion-parts/range-rover-l322-2006-2010-headlight-conversion-connectors-pair.html Note these are only for 2006-2009 models.
We are working on full kits for the front end at the moment .... but for the moment you can find the parts for sale here. www.powerfuluk.com/vehicles/range-rover-full-size/l322-vogue-2002/2010-conversion-parts.html
I ordered this electronic from u and installed it properly like in the video and all disco lights are fixed but the indicators still blink fast and still got message "check rear lights" what can I do?
These boards will fix 95% of cars. The most common problems we find with the indicators are other changes to the indicator circuit on the car. For example 1) LED side repeaters fitted 2) LED front indicators fitted ( later headlights ) 3) NAS spec vehicle / NAS spec lights fitted 4) Towbar electrics - non genuine can cause issues. The only possible fix is to add a resistor across the Earth and Indicator wires to see if this helps.
Hi - we tried this in our 2002 and it worked fine. We have had a couple of problems but these seem to be cars that have also had the front end converted that clearly adds other problems into the mix.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Have U fixed the problem with the fast/normal blink? On your site U wrote that only problem is in the check light disco.
Nice fix for issue with permanent fog lights
Where do I get this product
How do you change the bulbs in them upgrade lights anyone know
Hey powerfulukltd. I just installed this kit and fog lights are not working. All other lights and functions are ok, but fog lights are not turning on(indicator on dash is turning on/off properly). There is no message on dash. Any idea what could be a trouble there? I have 2008 l322 without any other upgrades.
How did you disable side illumination?
I have installed these but I went to 2010 lights before I installed the circuit board and I still have the issues (apart from permanent fog lights) is it just a case of resetting the rear light warning codes in the cars brain and then it works like it should or are my lights just stuck like this? Thanks.
My hazards blink at normal speed but indicators are fast and fog light when turned on works on left side but not the right side.
Hi where I can buy this circuit board please?
I’ve got them fitted on a 2003 RR Vogue, indicators flashing quickly, and a message about checking the fog lights. Not a problem with the message on dashboard, but indicator annoys me. Ordered resistor for indicator. Fingers crossed.
I would be surprised if the fog lights work - thats the tricky bit.
Fog lights works fine, can’t understand why that message still comes up.
Can I put this electronic card inside the car? Make a gap inside? That the water does not fall on it from the rain?
Hi - we did discuss this in the video - you can put it in the boot spare wheel well..
Do you sell the rear ballast kit?
does the fast side light blinking only happen after first install or does happen every time you start the car fresh ?
it seems to be only after install but it may depend how long you leave the car - its a really odd thing and hard for me to fix !
Where can I buy that circuit board please
This is one our website - www.powerfuluk.com
can u say wrapping the board with electrical tape after wires are screwed will maintain proper function and add moisture protection.
Yes i can say that ... i can also say "she sells sea shells on the sea shore"
At 3:37 in the video i do say "super keen" people can fit the circuit inside the car... Or you can just pump the finished heat shrunk module full of silicone.
I bought it, connected it.
The fog lights don't work.
But there's no 12V signal on the yellow/black cable either.
When I connect 12V externally to Fog, it doesn't work either,
Of course the Fog indicator light is on.
Odd - the Yellow Black is the fog light - are you connecting 12V to the input side or the output side of the board ?
If it is to the output side of the circuit board then the fog light should be on...
Thank you for your answer.
I connected 12V test only on IN.
But still no voltage appears from the car harness.@@L663
where can i buy that card with resistances ??
www.powerfuluk.com/vehicles/range-rover-full-size/l322-vogue-2006/lamps-light-upgrades.html
can you add a link for where to purchase
Hi you can purchase here but we are waiting for some more capacitors so limited stock at the moment - more coming this week !
www.powerfuluk.com/range-rover-l322-led-rear-light-wiring-fix-05-09-cars.html
Do you guys have a Fix for the Front lights as well ?
Sure do
www.powerfuluk.com/vehicles/range-rover-full-size/l322-vogue-2006/2010-conversion-parts/range-rover-l322-2006-2010-headlight-conversion-connectors-pair.html
Note these are only for 2006-2009 models.
how much do you guys charge for a full 2002 face lift ?
We are working on full kits for the front end at the moment .... but for the moment you can find the parts for sale here.
www.powerfuluk.com/vehicles/range-rover-full-size/l322-vogue-2002/2010-conversion-parts.html
sorry what i meat is do you do it as in you guys do it and i pay labour and parts ?
Hi - no we are really not good enough to work on other peoples cars.... have you seen the mess we make of our own cars !
Is this also possible for a 2007-2008 L322 ?
yes - the process is the same as in the video
I ordered this electronic from u and installed it properly like in the video and all disco lights are fixed but the indicators still blink fast and still got message "check rear lights" what can I do?
These boards will fix 95% of cars. The most common problems we find with the indicators are other changes to the indicator circuit on the car. For example
1) LED side repeaters fitted
2) LED front indicators fitted ( later headlights )
3) NAS spec vehicle / NAS spec lights fitted
4) Towbar electrics - non genuine can cause issues.
The only possible fix is to add a resistor across the Earth and Indicator wires to see if this helps.
the cameraman loool my god FOCUS
This was filmed with a pin hole camera... look at the date !
Can you give us the link or website we can buy the resistors? Thanks in advance 👍
We have some of these on our website www.PowerfulUK.com
awesome
this is great, will it definitely work for the 2003 model? cheers
Hi - we tried this in our 2002 and it worked fine. We have had a couple of problems but these seem to be cars that have also had the front end converted that clearly adds other problems into the mix.
Is there any fix for the fast flashing of the indicators?