I have a 96 bronco and yall were talking about a custom console. If you want something that matches the interior pretty well you can do to any junk yard and rip the center console out of an 03-06 ford expedition. I went to autozone and got some fabric/vinyl spray paint and made it black and it looks great. The oem bracket for the stock center console can be modified easily to mount the expedition console. all you need is a dremel to shave the front of the console down to make it fit. Including paint the whole project costed me $60 and after 2 years it still looks perfect
Looks bad ass from the outside. Can’t wait to see what you do with the interior. I agree black is the way to go. Crazy to think interiors used to look like that. Fun video
I just got a 96 bronco and driving it about 70 miles back home was SKETCHHH. That steering issue had me stiff!!! 😂 😂 glad to see it’s a common thing 😂😂
I've had several full sized broncos. I ran 6" Superlift Superrunner lift and 35s. I loved that lift. I've never been much of a fan of the TTB though. Next time I think I'd opt for a solid axle conversion
I remember my brand new 96 F-150 work truck at commercial electric. The only thing I hated was the side mirror placement. That was a daily pain;) looking good.
Try tightening the steering sector bolt. I did mine and it was night and day. You guys are spending plenty so just get a redhead box and borgeson steering shaft. Looks good so far!
MIZER Brothers!!!!! FINALLY!!! May I suggest maybe a new steering shaft or parts related...On my 2011 Raptor(136K💪) Just had mine replaced...Quite bit of difference...Glad you boys are well, was starting to get worried.....Both of you have great taste!! NOW start unloading those videos!!!
The steering box was replaced with a redhead unit in the previous video but we have an aftermarket steering shaft that still needs to be installed. Hope that takes up the rest of the slack.
I have a 88 lifted and I got that same super lift system in the front and it makes it a bit tighter I added a stabilizer and it got a bit better but its not perfect
You guys have done a great job on the “Juice” but I was wondering if figured out how hand holds on your bronco because I also have a 1996 bronco and I’m having problem on how secure them with tearing the trim or A frame. I was if you have solution for this or am I shit out of lucky. Sorry for the language but I’m out of options.
It looks good but I wouldn’t have went with RC suspension. Just my experience it doesn’t last and for a few hundred more you can get better that lasts a lot longer.
I read where you already added a REDHEAD Power Steering Gear Box, that's half of it... Now grab you a Borgeson Steering Shaft... And thank me later. Trust me. I put it in my '91 Bronco, and it as smooth steering as my 2016 F150 was. Hands down. Look up a UA-camr called "TheFix" and he has the videos of it... That's where I learned of it first. Best $600 I ever spent on any car mods, ever, hands down.
My favorite of y'alls super fleet.
This thing is getting more fun to drive!
The description of how it handles is my bronco on 35s exactly haha so funny when he described it
I have a 96 bronco and yall were talking about a custom console. If you want something that matches the interior pretty well you can do to any junk yard and rip the center console out of an 03-06 ford expedition. I went to autozone and got some fabric/vinyl spray paint and made it black and it looks great. The oem bracket for the stock center console can be modified easily to mount the expedition console. all you need is a dremel to shave the front of the console down to make it fit. Including paint the whole project costed me $60 and after 2 years it still looks perfect
Looks bad ass from the outside. Can’t wait to see what you do with the interior. I agree black is the way to go. Crazy to think interiors used to look like that. Fun video
Glad to see y’all still making vids I check on y’all’s account every once in a while to see if you’ve updated the ol girl
I just got a 96 bronco and driving it about 70 miles back home was SKETCHHH. That steering issue had me stiff!!! 😂 😂 glad to see it’s a common thing 😂😂
Love this and maybe add a Godzilla and Whipple to this.
My second favorite vehicle on the channel only gives way to the gt350!!
You are gonna crap when you see the 350 in the next few vids…
@@BackroadDriver can’t wait !!
Knew I loved you guys for a reason. Sweet Bo Jersey! Huge Raiders fan!
The Juice is back, love it
I had a 95 bronco. Lotta electric issues and brakes were expensive. But overall I loved it. Miss it to this day.
Love the Juice. This style Bronco was one of my first loves. Can hardly wait to see her all done.
Them tolling shots are nice
Restoring my 94 bronco installing leaky cap weather seals and put on a custom receiver hitch
Really excited to see where you are going with this build.
Love this ole Bronco!
My favorite build
I've had several full sized broncos. I ran 6" Superlift Superrunner lift and 35s. I loved that lift. I've never been much of a fan of the TTB though. Next time I think I'd opt for a solid axle conversion
I remember my brand new 96 F-150 work truck at commercial electric. The only thing I hated was the side mirror placement. That was a daily pain;) looking good.
Wicked 🖤
Thanks!
Yall should get an expedition center console, popular upgrade. Westin steps, superduty seats
Love me some bronco content looks amazing boys 👍👍
Looks mega badass. Good work boys.
Gorgeous!
I had a 91 Ford bronco. Built 302 I put my exhaust from my 87 mustang on it. And I was getting 10 and a half miles to the gallon
Try tightening the steering sector bolt. I did mine and it was night and day. You guys are spending plenty so just get a redhead box and borgeson steering shaft. Looks good so far!
send it down to gumby at texas speed lab and get it whipple coyote swapped
I’m about to drop the trans pan in my 96, fluid and filter change.
Love it. Lookin sharp
MIZER Brothers!!!!! FINALLY!!! May I suggest maybe a new steering shaft or parts related...On my 2011 Raptor(136K💪) Just had mine replaced...Quite bit of difference...Glad you boys are well, was starting to get worried.....Both of you have great taste!! NOW start unloading those videos!!!
I agree replace steering shaft and steering box.
The steering box was replaced with a redhead unit in the previous video but we have an aftermarket steering shaft that still needs to be installed. Hope that takes up the rest of the slack.
Looks just like my94
I have a 88 lifted and I got that same super lift system in the front and it makes it a bit tighter I added a stabilizer and it got a bit better but its not perfect
Superlift stear system needs upgraded, and 6" rear spring to teplace the block for my rig in the future
I got a ford bronco 1983 5.8 v8 351 engine blow out. Just sitting here willing to sell and have you guys fix it and show it to the people. Original
You guys have done a great job on the “Juice” but I was wondering if figured out how hand holds on your bronco because I also have a 1996 bronco and I’m having problem on how secure them with tearing the trim or A frame. I was if you have solution for this or am I shit out of lucky. Sorry for the language but I’m out of options.
Can u get tighter steering gearing shaft or something like that
Can you provide some details on the undercoating, suspensions, and steering you had them install?
Give Line-X of Knoxville a call. They can tell you all about it.
Line X of Knoxville Coatings and Customs
(865) 693-3776
g.co/kgs/nMVk28
Hows the rough country ride quality? I’m between them and bds for a 4 inch lift.
any alignment issues after yall did that work or did it align easy with that TTB ?
That's the o.j. edition.
Great truck! The rear end looks like it's been brought forward a few inches 🧐🤷🏼♂️
Glad you survived Disney
It looks good but I wouldn’t have went with RC suspension. Just my experience it doesn’t last and for a few hundred more you can get better that lasts a lot longer.
What size wheel and what's the offset. It looks awesome
What headlights are you guys running
What kind of undercoat and paint did you use?
what size are the rims???? Also are they 8" deep or 10" deep????? THANKS!!! Keep up the good work! Inspiration for us all with Broncos
Did you have to purchase any additional parts for the superlift conversion? Or did the kit come with everything you needed?
Would you guys recommend undercoating on a new vehicle?
Put a redhead steering box in there
Redhead stealing box may help and made in USA.
I have a 94' - what did this run price wise?
Im going with a 1 piece headlights
I read where you already added a REDHEAD Power Steering Gear Box, that's half of it... Now grab you a Borgeson Steering Shaft... And thank me later. Trust me. I put it in my '91 Bronco, and it as smooth steering as my 2016 F150 was. Hands down. Look up a UA-camr called "TheFix" and he has the videos of it... That's where I learned of it first. Best $600 I ever spent on any car mods, ever, hands down.
Agree. Did this myself along with replacing everything else with desolate parts from the wheel to the steering wheel.
Change the shaft going to the steering box from the column if you replace it with a cheap unit it wolnt last try to buy oem ford
when's the 7.3 godzilla engine going in?
😊👍🌹
I vote go original on the interior, unless you make it look like it came from the factory with the aftermarket.
Going to sell it?
You guys should swap a 2.7EB in the engine bay!
The fact you would do or say anything that brings any attention to a sociopath that murdered two innocent people is ignorant and in poor taste