Hello utuber My job is PLC developer from korea :) i watch your video now. I have seen this kit. i know that this kit is used by works2 And this kit commutes to rs232c. After watching your video. Thanks information
Hi many thanks for this video Can you ecplain why you connected a 232 to 232 cable and then an usb to 232 cable, and not just one usb to 232? I m about purchasing the usb to 232 and i don t know if i neeed also the other cable Thanks Fabio
Hi Fabio, Thanks for watching the videos, a cable similar to this usb-serial RS232 www.trendnet.com/langsp/products/USB-adapters/TU-S9 and an additional male-female extension, more videos and documentation pdacontrolen.com/category/lollette/, Regards
Hi. When I make a program in structure language and I do the logic with block functions, the physical PLC does not execute it, why is this? I have a FX3U 24MR
Hi David, Thank you very much, the PLC has an STM, there are some Arduino - STM implementations, it is a great idea in the future, the purpose for testing is to replicate "hacking" the Mitsubishi MELSEC protocol and that an arduino, ESP8266 or ESP32 can send frames to use its peripherals without modifying the original firmware, but thanks for the suggestion, you can see more tests and upcoming integrations in: pdacontrolen.com/category/lollette/ Subscribe and share, greetings from PDAControl
Hi Hafi , I feed it at power supply 24VDC and 2A in case I use a lot of input sensors, and of course it depends on the load I use at relay outputs, Regards
@@-USER_NAME Да, решил. Все дело в кабеле rs232 и китайском драйвере, а также в подключении к программе через связь 38.4, он работает только через эту связь, ну и конечно правильный com port нужно выбрать вашего компа.
Hola Erbar , Tengo planeado retomar pruebas con este PLC, dado que técnicamente es un clon de mitsubishi, supongo que si permite comunicar quizás por modbus RTU con algunas HMI, podrías darle un vistazo a este canal, realizan revisiones rapidas, ua-cam.com/users/ChinaPlcCentervideos , creo que la han comunicado con una HMI OP320 ua-cam.com/video/jbjMV9FlfGY/v-deo.html , Pronto retomare pruebas, saludos y suscribete.
Dear friend. On your website I found an article "The first CPU program" and there you mentioned a little about the problem . Now this problem 0180840b is my life 😂. When connecting fx3u (le3u), I get this error on any devices. Could you suggest a solution?
Hello utuber
My job is PLC developer from korea :)
i watch your video now.
I have seen this kit.
i know that this kit is used by works2
And this kit commutes to rs232c. After watching your video.
Thanks information
Hi many thanks for this video
Can you ecplain why you connected a 232 to 232 cable and then an usb to 232 cable, and not just one usb to 232? I m about purchasing the usb to 232 and i don t know if i neeed also the other cable
Thanks
Fabio
Hi Fabio, Thanks for watching the videos, a cable similar to this usb-serial RS232 www.trendnet.com/langsp/products/USB-adapters/TU-S9 and an additional male-female extension, more videos and documentation pdacontrolen.com/category/lollette/, Regards
@@PDAControl u didnt explain shit
Fantastic my friend, thank you very much for this!!!😃
Hi. When I make a program in structure language and I do the logic with block functions, the physical PLC does not execute it, why is this? I have a FX3U 24MR
Does it have a rs232 out to communicate with other systems?
Hi Currently, I am testing to connect to Node-red either using Melsec or Modbus RTU, Greetings and subscribe to PDAControl pdacontrolen.com/
Sabe me dizer qual a pinagem do cabo serial?
Great Video, did you manage to connect the FX3U to an Arduino ?
Hi David, Thank you very much, the PLC has an STM, there are some Arduino - STM implementations, it is a great idea in the future, the purpose for testing is to replicate "hacking" the Mitsubishi MELSEC protocol and that an arduino, ESP8266 or ESP32 can send frames to use its peripherals without modifying the original firmware, but thanks for the suggestion, you can see more tests and upcoming integrations in: pdacontrolen.com/category/lollette/ Subscribe and share, greetings from PDAControl
How many ampere that plc fx3u need for supply?
depende do que ele irá controlar...
Hi Hafi , I feed it at power supply 24VDC and 2A in case I use a lot of input sensors, and of course it depends on the load I use at relay outputs, Regards
How to read from PLC to PC ?
What is the complete modbus settings for this PLC to be able to connect to PC?
(* Setup ModBus on port 2 RS485 *)
MOV(M8002 , H4081, D8120 ); (* slave 9600,8,N,1 - K16513=H4081 *)
MOV(M8002 , K20, D8129); (* Modbus communication timeout 20ms *)
MOV(M8002 , K1, D8121); (* ID = 1 *)
Какой кабель использует для программирования плк? Все перепробовал, не могу подключиться.
USB - RS 232 . такая же ситуация кабель купил другой но ПЛК на связь не выходит . Вы решили вопрос ?
@@-USER_NAME Да, решил. Все дело в кабеле rs232 и китайском драйвере, а также в подключении к программе через связь 38.4, он работает только через эту связь, ну и конечно правильный com port нужно выбрать вашего компа.
@@-USER_NAME и ещё, вспомнил, что там нужен ноль модемный кабель db9, без него он почему-то не хотел работать
@@sergeibabadjanov853 понял . Буду пробовать через переходник psi - 232 . Спасибо большое
It works in 12v supply
Sabeis si se puede utilizar con una pantalla Nextion a traves de rs232???
Hola Erbar , Tengo planeado retomar pruebas con este PLC, dado que técnicamente es un clon de mitsubishi, supongo que si permite comunicar quizás por modbus RTU con algunas HMI, podrías darle un vistazo a este canal, realizan revisiones rapidas, ua-cam.com/users/ChinaPlcCentervideos , creo que la han comunicado con una HMI OP320 ua-cam.com/video/jbjMV9FlfGY/v-deo.html , Pronto retomare pruebas, saludos y suscribete.
gracias hechare un vistazo, la verdad es que seria una buena combinación.
TON and TOF dosen't work with me.
Hello friend, have you ever worked with this type of PLC using PID and PWM block?
Dear friend. On your website I found an article "The first CPU program" and there you mentioned a little about the problem . Now this problem 0180840b is my life 😂. When connecting fx3u (le3u), I get this error on any devices. Could you suggest a solution?
No usa batería de respaldo?
Algunos modelos si usan!
@@alejandropavez1091 porqué unos si y otros no?
sir could you give the program cable connection?
I think its rs232
fantastico :)
Gracias por visitarnos, te recomiendo el sitio hay muchas pruebas interesantes, pdacontroles.com/category/lollette/ , Saludos desde PDAControl
TY, came here just to find the baud rate of 38.4kbps!
CREAT