Sorry for the blurry sections. I actually DID refilm it, but the refilmed parts didn't match the vibe of the blurry one so decided to keep it. I hope you guys don't mind feeling like a teenager with undiagnosed Myopia for a bit. Lazy video ngl
One other thing about Full Circle Distribution is that it would be great if they'd show the concave of their boards, instead of only having one top-down view 🤞
I know you haven’t gotten a chance to review them, but it would be cool to hear your thoughts on the New Caliber III precision trucks. Also the Zealous precision trucks in the normal and wide hangars they recently released. It’s cool both companies came out with an affordable truck that performs just as weIl as if not better then other high end downhill free ride trucks. I think it would make a good video having Abuga’s expert opinion, also shout out to both companies. Downhill254 has the juice 🧃
Hehe, if we can talk to Liam and Bryce they may be down for it. I know Liam has been but getting the trucks has come with some challenges, on BOTH our ends. Haven't reached out to Bryce yet, but maybe I should
Just ordered the split degree angle bear trucks that dropped on landyachtz recently would love to hear your thoughts on this if you've had the chance to try them
Hello I wanted to say I love your videos, and thank you for sharing your knowledge. I juat started longboarding, and have a fee boards ripper, dipper, mummy, and a drop hammer. I will be trying to learn to slide on the drop hammer I put caliber 3 III (raked) on them. Thinking set up with zombie hawgs 75 mm but I stood on the board not that I'd ever carve that hard but got wheel bite. So I went back to the 70 mm supreme hawgs. I was curious about putting on fatty hawgs, or ez hawgs to learn to slide. I'm still wanting to cruise and carve as well. What are your thoughts on those options or do you have other wheel options that might be ok. I had considered the 70 mm 80 a rayne envy.
The Rayne Envy you mentioned is good, though I'm pretty sure only comes in 77a nowadays. The old 80a ones are basically gone. Also recommend the Powell Snakes, though they're much more expensive than the Raynes can be found for. I use the Raynes myself and find them very smooth sliding and they last a long time.
I don't ride downhill, but I love your videos and use your wedging and truck advice on my esk8 and it made so much difference. Can I ask if grip tape is required on a cruiser? I have an electric Loaded Omakase. When I installed the electronics, I removed the grip tape and it looks so cool I polished the bamboo and left it off. I ride with vulc rubber shoes and have been riding like this for a month and a half at speeds of 30-40km/h and only came off one time. I can turn as hard as normal without my shoes slipping, should I just keep it like this or am I crazy?
Definitely would recommend griptape for riding at those speeds. You're not really doing yourself any favors by not having it. The only disciplines where omitting griptape helps (usually only in certain spots on the board) is dancing.
@@RatBürgerSk8Ok, that's what most people are telling me. I put a footstop on it that helps, but I think I want to find some mild clear grip tape that's not going to scratch up my clothes or car/bus seats too much. I've got some coarse stuff that I'll use around the feet though.
Awesome video! How much rail hang on the Rocket/ZM1 Setup?.. nothing wrong with it I'm just curious and have been experimenting with railhang/turttling lately and find that a little rail hang feels pretty good! Feels quicker in response to my input.
Teenager with undiagnosed myopia-😂 Let’s get you paid 💰. Finally understanding basic language of set ups and I did dewedge for first time in past 2 weeks-like it more. Your video gave me idea to maybe make own noob set up perspective-of course without the skill performance. 😆
Sorry for the blurry sections. I actually DID refilm it, but the refilmed parts didn't match the vibe of the blurry one so decided to keep it. I hope you guys don't mind feeling like a teenager with undiagnosed Myopia for a bit.
Lazy video ngl
One other thing about Full Circle Distribution is that it would be great if they'd show the concave of their boards, instead of only having one top-down view 🤞
I agree. Loads of small things they could do to make things better
Get that payment brother
Fresh Setups🔥🔥🔥 and I love how you explain everything in detail in your videos, the type of things I love
Thank you professor, i enjoy your technical breakdown lectures.
*Setup video* 🤩
🤙🏽⚡️🤟🏽⚡️👌🏽
Ttucks & Bushings are my JAM! Split angles, etc, ypur video on that was great!
I knew the Comet Cruiser would feature!
you know it haha
Witcher 3 Gwent music goes hard
A fellow man of culture
Great video as always. I always chuckle and it puts me in a good mood.
Great video
those wiiiide wheels! woah! also get that moneys good sir!
I know you haven’t gotten a chance to review them, but it would be cool to hear your thoughts on the New Caliber III precision trucks. Also the Zealous precision trucks in the normal and wide hangars they recently released. It’s cool both companies came out with an affordable truck that performs just as weIl as if not better then other high end downhill free ride trucks. I think it would make a good video having Abuga’s expert opinion, also shout out to both companies. Downhill254 has the juice 🧃
Hehe, if we can talk to Liam and Bryce they may be down for it. I know Liam has been but getting the trucks has come with some challenges, on BOTH our ends.
Haven't reached out to Bryce yet, but maybe I should
Cool setups dude. You really don’t need more boards if you have that quiver
Nice 👍
Just ordered the split degree angle bear trucks that dropped on landyachtz recently would love to hear your thoughts on this if you've had the chance to try them
Hello I wanted to say I love your videos, and thank you for sharing your knowledge.
I juat started longboarding, and have a fee boards ripper, dipper, mummy, and a drop hammer. I will be trying to learn to slide on the drop hammer I put caliber 3 III (raked) on them. Thinking set up with zombie hawgs 75 mm but I stood on the board not that I'd ever carve that hard but got wheel bite. So I went back to the 70 mm supreme hawgs.
I was curious about putting on fatty hawgs, or ez hawgs to learn to slide. I'm still wanting to cruise and carve as well.
What are your thoughts on those options or do you have other wheel options that might be ok. I had considered the 70 mm 80 a rayne envy.
The Rayne Envy you mentioned is good, though I'm pretty sure only comes in 77a nowadays. The old 80a ones are basically gone. Also recommend the Powell Snakes, though they're much more expensive than the Raynes can be found for. I use the Raynes myself and find them very smooth sliding and they last a long time.
Out of topic but what glasses frame are you wearing they look real nice
nice bro
I don't ride downhill, but I love your videos and use your wedging and truck advice on my esk8 and it made so much difference. Can I ask if grip tape is required on a cruiser? I have an electric Loaded Omakase. When I installed the electronics, I removed the grip tape and it looks so cool I polished the bamboo and left it off. I ride with vulc rubber shoes and have been riding like this for a month and a half at speeds of 30-40km/h and only came off one time. I can turn as hard as normal without my shoes slipping, should I just keep it like this or am I crazy?
Definitely would recommend griptape for riding at those speeds. You're not really doing yourself any favors by not having it. The only disciplines where omitting griptape helps (usually only in certain spots on the board) is dancing.
@@RatBürgerSk8Ok, that's what most people are telling me. I put a footstop on it that helps, but I think I want to find some mild clear grip tape that's not going to scratch up my clothes or car/bus seats too much. I've got some coarse stuff that I'll use around the feet though.
is that a bonglord
Awesome video!
How much rail hang on the Rocket/ZM1 Setup?.. nothing wrong with it I'm just curious and have been experimenting with railhang/turttling lately and find that a little rail hang feels pretty good! Feels quicker in response to my input.
Just a little bit, according tot eh rail match spreadsheet it's 0.7inches altogether. Wouldn't have it any other way though
✌
What cruiser wheels would recommend? I like speed I have z flex cruiser board just need to upgrade the wheels
Can you sell some merch so we can support your content in some way?
two uploads in a week lfg
Help our bro out! Like share and subscribe!!!
where did you find a sticker like that?
Rocket rhino or rhino racetail?? Which one do you liked more?? Can’t decide
Rhino 100% over the race tail. But you should get the Don. Best board in their line up and super customisable
Teenager with undiagnosed myopia-😂 Let’s get you paid 💰. Finally understanding basic language of set ups and I did dewedge for first time in past 2 weeks-like it more. Your video gave me idea to maybe make own noob set up perspective-of course without the skill performance. 😆
Looking forward to it, def gonna watch it
No longer riding the freedive?
I sold that board at the beginning of the year. Wasn't riding it much, didn't dig the microdrop after a while. Great board still