DFAM Neutron Volca Sample - Live Industrial Techno Jam - 2018-12-22
Вставка
- Опубліковано 21 гру 2018
- Running a bit harsh on the high frequencies and really pushing the clipping edge this time. Same set up as last time but MIDI this time. Volca Sample sync out to SQ-1 sync in. SQ-1 sync out to RK-004 sync in. RK-004 sync out to DFAM Adv/Clock in. SQ-1 CV-A out to Mult 1 in and Gate-A out to Mult 2 in. Mult 1 out to Neutron Osc 1 in and DFAM VCA CV in. Mult 2 out to Neutron E. Gate 1 in and DFAM VCO 2 CV in. SQ-1 CV-B out to Neutron Osc 2 in and Gate-A out to Neutron E. Gate 2 in. Neutron Osc 1 out to Ring Modulator In via Attenuator 2. DFAM VCO 1 out to Ring Modulator Carrier in, VCO 2 out to Mel9. FX1 set to Auto Filter, FX2 set to Delay. Aux1 to G1on for Compression, Aux2 to B1on for M Compressor and Stereo Delay. Volca Sample thru MPK2 for Backing Looper and stereo signal routed direct to Aux1 (no mains). DFAM gets Aux2. Neutron gets FX2. Mel9 gets lots of FX1 and Ring Modulator runs dry.
Gear:
Moog DFAM
Behringer Neutron
Korg Volca Sample
Korg SQ-1 CV/MIDI sequencer
Electro-Harmonix Mel9 pedal
Korg MPK2 effects pad
Synthrotek Passive Ring Modulator (DIY kit)
Synthrotek Passive Mult (DIY kit)
Zoom B1on/G1on effects pedals
Retrokits RK-004 MIDI hub/CV clock
Behringer SX2442FX audio mixer
Behringer UCA222 A/D converter
Zoom Q2n video recorder
Post Audio Processing: none
Music © all rights reserved. Haze Anderson - 2018
Love this....I really should make more use of the Volca Sample
Do you have the Retrokits RK-002 MIDI cable? It really makes it universally controllable. I also swear by Vosyr for managing its samples. Cheers!
Both these pieces of equipment are absolute MONSTERS
Dope
😎
I was going through Nick Cooper's XP-80 video manual, and came across this, his MC-303 video manual: ua-cam.com/video/CZvJB5DD_8o/v-deo.html
Someone needs to mash that one up with this one: ua-cam.com/video/GCtUtI3IeFQ/v-deo.html 😏