How to Replace Rear Power Window Motor & Regulator Assembly 2007-2012 Nissan Altima

Поділитися
Вставка
  • Опубліковано 20 сер 2023
  • Buy Now!
    New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ia/1AWRG01648
    This video shows you how to replace both the window regulator and the motor on your 2007-2012 Nissan Altima. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
    This process should be similar on the following vehicles:
    2007 Nissan Altima
    2008 Nissan Altima
    2009 Nissan Altima
    2010 Nissan Altima
    2011 Nissan Altima
    2012 Nissan Altima
    Tools you will need:
    • 10mm Socket 1aau.to/obdz/1AXAA00017
    • Trim Tool Set 1aau.to/oadI/1AXXX00006
    • Ratchet 1aau.to/obDq/1AXAA00016
    • Socket Extensions 1aau.to/obxF/1AXAA00015
    • Gloves 1aau.to/oabL/1AXSS00048
    • Painter's Tape
    • Safety Glasses 1aau.to/o4X/1AXAA00343
    • Pick 1aau.to/oQt/1AXAA00037
    Subscribe: / @trq
    Check out our playlist:
    Honda Civic 2006-2011 8th Generation: • Honda Civic 2006-2011 ...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

КОМЕНТАРІ • 8

  • @TRQ

    √ Watch the Video

  • @derrickhunter3392

    What if the window doesn’t move and is in up position?

  • @mar4oz

    If the motor/switch isn’t working and the window isn’t moving at all, how Do you manipulate the glass while working on this unit? Is there a way to raise the glass safely while waiting for the replacement part(s), so that it’s not stuck in the down position? Thank you.

  • @notthezeya

    Show how to use OBD scanner also

  • @magalideleon9520

    My window doesn’t come up or down

  • @MrJoshbaha

    What if you're getting the motor from a junkyard and you can't roll the window down