I got the ezi wire cut. Couldn't do with out it after 5 years no more bad shoulders bad back pulling on a pissing bond cutter. No more mess no damage to outer or inner trims or body . Awesome tool
I think this tool will also appeal to certain people, but I believe it will be absolutely mandatory as the tolerances around the windshields continue to decrease. I think we're going to be seeing a lot of these things in the future. I'm sold.
You can re-use the same section of line on average for 4-6 removals. However, it also depends on the line being used. Details here www.wrdglasstools.com/spider-line
every windshield i cut out NEVER cut out that easy....they sure make it look easy........I usually have to saw it out....back and forth.....what a pain
Isnt the winshield glued on? What if i heat the edges with a small torch an use a thick aluminum sheet so it wont damage the glass.. i have a cracked winshield n need it replaced before i get a ticket
I was hoping this tool would work like it does in the video, unfortunately, it broke repeatedly. We tried it on four different cars and it didn't work. The concept is good, but the wire wasn't up to the job. How did anyone else get on with this tool?
+paul turk Seem like you have difficulty using the tool. We would be happy to guide you through the removal process, just give us a phone call. Our latest tool kit version it is equipped with P8 cutting line, 365 lbs breaking point. To break this line on the first few removals, something you are not doing right. Looking forward to hearing from you
I use the easy wire it's so much easier. don't have to keep rotating it. just 1 time you need to move it. I even use a fiber lime as well and get about 4-6 cars put of it. this tool in video is so much more extra work.
Well, I know that quite a few companies tried this tool and we all have the same issue. If you want to send me the improved version to try then I am happy to do that and post a new review. Please contact me at paulturk71@gmail.com
Hi Jeetendra, Sorry for the delay in responding to you. The tool is available in many countries around the world through our distributors. We ourselves are located in Vancouver, Canada. You can contact us directly for more information www.wrdglasstools.com/contact-us All the best.
I got the ezi wire cut. Couldn't do with out it after 5 years no more bad shoulders bad back pulling on a pissing bond cutter. No more mess no damage to outer or inner trims or body . Awesome tool
I think this tool will also appeal to certain people, but I believe it will be absolutely mandatory as the tolerances around the windshields continue to decrease. I think we're going to be seeing a lot of these things in the future. I'm sold.
Excellent tool. goonzsquad video and reference sent me here.
What is the name of the equipment to remove the windshield?
Niiiiiiiiiiiiiiice job, where can i get the tool ??
how often do you have to change the line.
What kind of line is that? Fiber line? Will it work with wire?
You can re-use the same section of line on average for 4-6 removals. However, it also depends on the line being used. Details here www.wrdglasstools.com/spider-line
every windshield i cut out NEVER cut out that easy....they sure make it look easy........I usually have to saw it out....back and forth.....what a pain
what no guards?
Isnt the winshield glued on? What if i heat the edges with a small torch an use a thick aluminum sheet so it wont damage the glass.. i have a cracked winshield n need it replaced before i get a ticket
Yeah bro that'll work hahaha
Does it work for all cars buses and 18 wheeler
No it works only on the windshields who are the glued to the body
I think this tool will appeal to a particular group of people. I'm not convinced that it's designed specifically for the trade.
Couldn't imagine if rain is coming and there's no way to finish cutting with that kind of tool...Great concept thou
cuanto cuesta donde la podria conseguir
I was hoping this tool would work like it does in the video, unfortunately, it broke repeatedly. We tried it on four different cars and it didn't work. The concept is good, but the wire wasn't up to the job. How did anyone else get on with this tool?
+paul turk Seem like you have difficulty using the tool. We would be happy to guide you through the removal process, just give us a phone call. Our latest tool kit version it is equipped with P8 cutting line, 365 lbs breaking point. To break this line on the first few removals, something you are not doing right. Looking forward to hearing from you
I use the easy wire it's so much easier. don't have to keep rotating it. just 1 time you need to move it. I even use a fiber lime as well and get about 4-6 cars put of it. this tool in video is so much more extra work.
Well, I know that quite a few companies tried this tool and we all have the same issue. If you want to send me the improved version to try then I am happy to do that and post a new review. Please contact me at paulturk71@gmail.com
@@joshuahalbstadt8813 where do I find the easy wire?
Prezzo
That is GREAT!
Wow, that was cool
how to gets this tools ? and where /
Hi Jeetendra,
Sorry for the delay in responding to you. The tool is available in many countries around the world through our distributors. We ourselves are located in Vancouver, Canada. You can contact us directly for more information www.wrdglasstools.com/contact-us
All the best.
Thats cool.
Your Crazzzyyy
Robinson Daniel Martinez Karen Wilson Sarah
I hate deaf & mute videos...
Gimme a drag knife and 2 minutes lol
Does it work for all cars buses and 18 wheeler
I'm testing this tool tomorrow. Hopefully, it will be as easy as this video... I'll tell you how good it is.
Congrats on that tool brother n thanks for sharing
We are still waiting😂