Hello again nsc my friend , as i said before I've recently bought a ps3 slim 25xx which is almost old and you know the condition of thermal glue under the both ihs on most of these consoles better than me , and in place i living there are few people that deliding these console so I've changed the thermal paste on both cpu and gpu ihs with hand made thermal paste which a part of it was mx5 so my main question was, does the PS3 Slim fan speed on these aged consoles go above 35% in syscon mode, or is 35% the maximum fan speed before reaching 80 degrees and the console overheats? for example 37% or 40%?
Hello You can test this with WebMan Mod, just set the fan to Syscon mode, and you will see how it works. Press and hold (Start+Select) and it will show you all the info. Before reaching 80°C the fan will even go higher than only 35% It's all about the heat transfer, more slower the heat transfer the more Fan speed it uses, because it will notice, that the temperature is not going down that fast. That's why i always say, the heat tranfer and the right pressure is ones of the most important. The faster it gets cooled, the better temperatures and also slower Fan speeds. My next video will be exactly about this stuff, maybe i will be able to do this video today. PS3 Mini IHS Project Part II
@@NSC-Modz Yeah i cant wait to see the mini IHS you had a great pressure on the cell cpu on your failed ps3 fat overclocked video and you still fix it i had a great eye NSC said i noticed it right away this will be a great scientific test love NSC in the place to be HA ha FOR THE PLAYERS YAAA 😇😀😃🥳😎❤💯🤟
@MrMurphy1992 yeah, you got the bullseye :) you are great guy who listen and learn very fast 😀 You always welcome bro. ✌️ BTW: NSC's PS3 MINI IHS Project Part 2 is online 🤗✌️
Sim, mas não gosto tanto, fica tudo na mesma e custa mais dinheiro, MX6 o Kryonaut chega muito bem 😀 A única coisa que e bom, ptm da para utilizar mais vezes 🥰
too much pressure will cause solder balls crack and lost connection too.not always greater pressure better,,no offense,,i still like your video.keep working:)
At this point I think we should just 3d print a custom ps3 case and use a pc cpu cooler on it, I think that would be dope.
Yeah, PC Coolers are best ✌️
It has been done. Ps3 converted with a water cooler replacing a heat sink
Hello again nsc my friend , as i said before I've recently bought a ps3 slim 25xx which is almost old and you know the condition of thermal glue under the both ihs on most of these consoles better than me , and in place i living there are few people that deliding these console so I've changed the thermal paste on both cpu and gpu ihs with hand made thermal paste which a part of it was mx5 so my main question was, does the PS3 Slim fan speed on these aged consoles go above 35% in syscon mode, or is 35% the maximum fan speed before reaching 80 degrees and the console overheats? for example 37% or 40%?
Hello You can test this with WebMan Mod, just set the fan to Syscon mode, and you will see how it works. Press and hold (Start+Select) and it will show you all the info. Before reaching 80°C the fan will even go higher than only 35% It's all about the heat transfer, more slower the heat transfer the more Fan speed it uses, because it will notice, that the temperature is not going down that fast. That's why i always say, the heat tranfer and the right pressure is ones of the most important. The faster it gets cooled, the better temperatures and also slower Fan speeds. My next video will be exactly about this stuff, maybe i will be able to do this video today. PS3 Mini IHS Project Part II
@@NSC-Modz Yeah i cant wait to see the mini IHS you had a great pressure on the cell cpu on your failed ps3 fat overclocked video and you still fix it i had a great eye NSC said i noticed it right away this will be a great scientific test love NSC in the place to be HA ha FOR THE PLAYERS YAAA 😇😀😃🥳😎❤💯🤟
@MrMurphy1992 yeah, you got the bullseye :) you are great guy who listen and learn very fast 😀 You always welcome bro. ✌️ BTW: NSC's PS3 MINI IHS Project Part 2 is online 🤗✌️
Você já fez testes usando o Thermal pad ptm7950, estou usando no meu ps4 pro e achando melhor do quer pasta térmica
Sim, mas não gosto tanto, fica tudo na mesma e custa mais dinheiro, MX6 o Kryonaut chega muito bem 😀 A única coisa que e bom, ptm da para utilizar mais vezes 🥰
too much pressure will cause solder balls crack and lost connection too.not always greater pressure better,,no offense,,i still like your video.keep working:)
Right, the most already know. It's not about to much pressure, it's about pressure that stays there, and not get lost because cheapy clamps 😆