Thanks for posting this video. I was about to scrap my old/failed battery until I found your post. I learned alot from your video. Thanks once again. Blessings to you 🙏 ✨️ 💛
so do you have to wait 24 hours after re-filling the cells? Or can you just test the battery right after you refill the cells and re attach the battery
Thank you I try using only distilled water and I use 15.6 v charger 12 hours and I tested the battery voltage know 13.32v good Do the same with 6v battery but its still dead Thanks for you again
hey ,if anyone else trying to find out learn how to recondition batteries at home try Panlarko Recondition Planner (do a google search ) ? Ive heard some awesome things about it and my co-worker got great success with it.
interesting points ,if anyone else needs to find out about how to recondition batteries at home try Panlarko Recondition Planner (just google it ) ? Ive heard some great things about it and my buddy got great results with it.
Good video. A desulfator can take time to recover a battery as you demonstrated, I watched one video where he showed a time lapse of a month on using a desulfator. I myself use a PulseTech PowerPulse passive desulfator with a patented frequency used to gently desulfate batteries on my BMW Napa battery for the last three years and so far so good.
You say something at the end about epsom salts but I can't see the text so I don't know if you say how much per litre or if you still use distilled water or ordinary tap water. Anyone catch that detail?
I didn't see any text when he spoke of "Epsom salt" and didn't see any when the end cards were added. That's actually a good question, I'd like to know too. I have the exact same types of batteries he's demonstrating there. Will be getting some distilled water and recharging/reconditioning them to see if they'll work again.
My Friend I have 2 year old Lead Acid Battery 12 Volts, it doesn't give much power, What I did I filled with water Battery but still doesn't work well it becoming more worsen? What type of water shall I use? I saw your video you use Distilled water or you mixed some? If I will use distilled water it will restore again? Thank you
When a battery is just two years old lead acid and will not charge. DO you really need to use the desalinator ??? What is the circuit inside the sulfinator ??
A desulphator is a device that gives short pulses of higher voltage i.e 16 to 17 volts, versus the normal charging voltage of 14.4 volts. Desulphators, give these higher voltage pulses at low currents such as less than 200 milliamperes, which can help in melting the sulphate deposits on the lead plates, thus making the battery fit for use, once again. Desulphators can make the battery run for another two or three years.
It's supposed to give high frequency or high voltage pulses. But what I can tell you is it's not actually worth it, they don't actually do it faster or better than a normal constant current finishing rate. At my work we recover industrial lead acid batteries for forklifts. We've got internal manuals from enersys and deka for recovering batteries and 20 years of doing it. Nothing has worked better than just charging it until the specific gravity stops appreciating, then if needed acid adjusting and a load test to either get 80% capacity or scrap. We also replace cells if it's just 1-2 bad cells. How long a battery lasts after recovery or if it's recoverable depends of how much use or abuse it got before. Sometimes there's a lot of positive plate corrosion and it's just dead. Or most of the plate material has already shed off and the capacity is gone. This is why we load test after it's known to be FULLY charged.
I have an old sealed lead battery, the multimeter reads 1.97VDC on it, is it still good and just recharge it? or do I need to pry it up and add some water to the cells then recharge it?
When did you last time charge it. If it you did not charge the battery for long time, it will self discharge and over time sulphate accumulated over lead plates . even you are getting 2v it will hard to recover the battery but you can try at last you have nothing to loss.
It really depends on how much it's been used before. Sealed batteries aren't the most successful at being recovered . If it's a normal sealed battery and not gel or AGM then only add water until the plates are just covered and no more. The electrolyte level will come up significantly after a charge. It could even possibly overflow on a overly discharged battery like that. Just give it a constant current charge 24hrs at a time until the resting (give it at least 8 it rest, 24hrs is more accurate) open cell voltage stops appreciating. Ideally you'd use specific gravity so you're not waiting 24hrs for the voltage to settle, but it's a sealed battery so it may not be possible.
@@advaithmadhavan8260 I had a battery which was reading 10.51v, all it had was a extremely dead cell, I couldn’t restore it because dead cells are hard to restore.
It looks like before and after are two different batteries. Before has a white sticker and the (+) are is cleaner. After has no white sticker and the (+) has more dirt.
Great video content! Forgive me for chiming in, I am interested in your thoughts. Have you heard the talk about - Lammywalness Trendy Trade Guide (do a google search)? It is a smashing exclusive guide for learning how to recondition batteries at home without the normal expense. Ive heard some decent things about it and my work buddy at last got amazing results with it.
This was great, thanks, been searching for "reconditioned automotive batteries" for a while now, and I think this has helped. You ever tried - Ammaceen Reconditioning Rabblement - (search on google ) ? Ive heard some amazing things about it and my cousin got amazing results with it.
Nice Video clip! Forgive me for butting in, I am interested in your opinion. Have you considered - Lammywalness Trendy Trade Guide (search on google)? It is an awesome one off product for learning how to recondition batteries at home minus the normal expense. Ive heard some awesome things about it and my GF got astronomical results with it.
Use an re-emf charger or an bedini to Charge the Batterie. I recovered my one in only 2h. Its faster and better. But let the Water sit for a while to let it suck up.
Those same batteries that you used in the lead acid battery video are now permanently sealed. I guess the reason why is that the company wants you to buy a new battery every few years as more sales equates to more future company profits. Anyways, great video!
Just takes a hammer and a chisel to remove the top plate Will this process work for me? I've got three 1270 lead acid batteries. Two installed and weak, one stone cold dead that was easy to open up, fill with distilled water and hook up to my new LED desulfator. I guess I need to be patient for a week or so and see what happens.
@@jonwzee It is so often that these sealed batteries die with an internal short of one of the cells. If you see any of the battery melted near the fill ports, just toss it.
I have a motorcycle battery that is five years old. I bought it, charged it, put it in the bike and it has never been started. Do you think I can revive it?
Best video.. Imposible... Im crazy for this video.. I have recommendation for knewreck rapid renew guide, very good lead acid battery reconditioning guide
I\'m not sure but ,if anyone else wants to uncover how to recondition my car battery try Megarno Amazing Battery Magician (just google it ) ? Ive heard some amazing things about it and my friend got cool success with it.
Even with a desulfator a dead ups battery is not woth saving. You would need distilled water (distilled or regular doesn't matter, the acid takes care of that), next cycle desulfator, then empty the cells completely, add acid and water again and if non of the cells are warped enough for short circuit (they almost always are) you might get 6m/1year in ups and not reliable under heavy load, no load test in video either. Just buy a replacement lithium batterij for your ups, pretty cheap these days, 10y worry free if the ups doesn't break^^ These kind of videos are a waste of time for everyone, hope this helps.
Not certain about the points made but ,if anyone else needs to find out about how to recondition batteries at home try Bablim Battery Booster (do a search on google ) ? Ive heard some decent things about it and my friend got excellent results with it.
Yes, HVinduction is correct. Lead-acid cells vent gases, which is how the cells lost the water that is being replaced in this video. Some people reattach the plastic covers over the rubber plugs using a few small drops of hot glue so that there are gaps between the glue drops through which gases can escape. Because these batteries are not truly sealed, even when new, it is important to keep them upright so that they do not leak acid if turned on their side.
I suspect that battery was fine all along. if you look at the + terminal at the begining of the video it has stom form of coating on it when he checks the voltage.......
1. Yes, you can charge it with a ups 2 distilled water is water that has been boiled and reconverted into a liquid 3 you can always buy bottles of it at your local pharmacy. But if you're in a hurry, you can boil water and wait for it to cool down. BAM!. You have distillet water. 4 i think it costs 50-70 dollars
@Toxic Lion There are many components to getting a good result. One plan I discovered which successfully combines these is the Magic Mender Wizard (check it out on google) definately the most incredible info that I've heard of. Check out this unbelievable website.
hey ,if anyone else wants to learn about how to recondition battery try Jadonite Renovate Battery Buddy (do a search on google ) ? Ive heard some interesting things about it and my mate got great results with it.
Toxic. Have i got this right? Just put distilled water in the battery and let it "soak" for 24 hours? What is connected to it during this process? Nothing? Battery charger? Cheers
Nice Video clip! Sorry for the intrusion, I would love your initial thoughts. Have you considered - Lammywalness Trendy Trade Guide (google it)? It is a good exclusive guide for learning how to recondition batteries at home without the normal expense. Ive heard some awesome things about it and my m8 got excellent results with it.
No, do not add any acid to the battery. Adding acid is risky, you only have to add distilled water to the battery. Even if you add acid, you will have to add 38% concentration sulphuric acid, which is not available for normal consumers. Nobody adds acid to batteries. It is only distilled water that is added.
You'll ruin the lifespan of the battery if you do that. In industrial battery recovery we do have 50% or 1.400 sulfuric acid barrels to acid adjust. We only use it after the specific gravity stops appreciating from a charge and it's still not at it's nameplate rating. The acid is used to replace what has been lost due to bad watering practice causing spillage on charge.
Friends, please do not poke the battery with a metal needle, as it is easy to short-circuit the plates! After removing the metal needle, you can still fill it with appropriate distilled water, which is also OK. The battery is generally repaired in this way after 5-6 years.
A lot of lead-acid batteries could be revived/lifetime extended by this method (+be kept working longer by checking on electrolyte liquid before it runs dry) . I read you can also use SODA WATER instead of distilled water. Anyone confirm/refute this? It's CRITICAL you re-charge with top caps OFF. I didn't know that the first time and a 12v motorcycle type battery "exploded". DON'T put batteries on chargers overnight. This is bad practice. Always charge batteries when you're able to regularly check on them. If you set fire to your house you can be dead from smoke inhalation within 5mins. Charge large HD lead acid batteries in your garage.
I have tried all this on a dozen batteries and it has not worked. On one battery I did have the desulfation work to bring the battery barely low back up! One time success is a miracle not a fix technique!
If you drained the cells of electrolyte you'd lose all the acid and energy holding capacity. You're not gonna remove sediment unless you can pull the plates out, which is a bad idea. Epsom salt is awful for your battery, it's just going to add mineral buildup on the plates. Baking soda is going to give you a strong reaction with the acidic electrolyte and you're going to lose a lot of capacity by neutralizing the acid and add sediment and mineral buildup. What exactly do people think this stuff is going to do except ruin your battery. Just charge it and see if it reacts ok. There are industry standards to recover batteries. Manufacturers recover industrial batteries all the time to resell, they really have the best practice because they have lots of money to make from it. My job is recovering or repairing customer batteries and the same goes for scrap batteries turned in if they show promise for recovery.
So i tried this and it kinda worked but battery capacities, especially load capacities have been reduced but yes it did work to an extent, only should we leave the water in after recovering the battery, also how did you put back on the caps because i tried and they pop off while charging
Yes, you can go Upto 17 or 18 volts, because overcharging the battery will help remove the sulphate deposits from the lead plates. But the fact is that you should keep the caps of the battery open, because the excess pressure and gas build up needs to be relieved. **This should be done in an open and well ventilated environment, and the gases should not be inhaled. Also, keep extra distilled water because you will boil off some of the distilled water inside the battery, so you need to fill in the distilled water.
It will take Upto 24 or more hours to get desulphated completely. And also make sure that the current is less than 200 milliamps. You can use a DC to DC converter or a variable lab bench power supply to supply a voltage above 16 volts and a current about 200 milliamps.
Also, be sure to continuously cycle the battery, i.e. charge and discharge the battery many times. The constant expansion and contraction of the lead plates helps the sulphate deposits break and dissolve.
Friend dear, I tried as you describe, I used 9.6v charger, charger was very hot and was reuned. When I CHECKED I SO THE BATTERY CELL like burned. What suggestion do you think of this. How am I recharge my 9v batteries.
Cheers for the Video! Excuse me for chiming in, I would appreciate your opinion. Have you researched - Lammywalness Trendy Trade Guide (probably on Google)? It is an awesome one of a kind product for learning how to recondition batteries at home minus the hard work. Ive heard some incredible things about it and my friend Sam after a lifetime of fighting got cool success with it.
Great video content! Sorry for butting in, I would love your initial thoughts. Have you heard the talk about - Lammywalness Trendy Trade Guide (just google it)? It is a good one off guide for learning how to recondition batteries at home without the headache. Ive heard some amazing things about it and my friend Sam got amazing results with it.
Same old bulshyt of trying to guess what they're doing, turn off the music and explain yourself! I couldn't take it n quit watching! hasta la vista Charlie Chaplin!
They actually do not. They have a repair mode but that is completely different. It won’t work for batteries under 6V and doesn’t provide the same current as a power supply. Battery desulfators solve this issue.
My flooded lead acid battery went down to 8+ volts, after charging for a few hrs in parallel with another same model battery , it swells up and was overheating. The voltage was still 8+ volts. Is this recoverable?
its probably shorted cells you can try and clean out the old acid and wash it out and fill it with epson salt solution but if this does not help you need to open it and replace the dead cells with new lead plates
Searches 664 There are many components to getting a good result. One resource I discovered which successfully combines these is the Jons Mender Guide (google it if you're interested) without a doubt the no.1 course i've seen. Check out this super website.
hey ,if anyone else wants to learn about how to recondition batteries at home try Panlarko Recondition Planner (do a google search ) ? Ive heard some super things about it and my cousin got amazing results with it.
There are many factors in battery repairing. One plan I discovered that succeeds in merging these is the Magic Mender Wizard (check it out on google) definately the most incredible info i've heard of. Check out this super website.
Appreciate Video! Forgive me for butting in, I would appreciate your opinion. Have you considered - Lammywalness Trendy Trade Guide (erm, check it on google should be there)? It is a smashing exclusive product for learning how to recondition batteries at home minus the headache. Ive heard some interesting things about it and my friend finally got great results with it.
Great Video! Excuse me for butting in, I am interested in your thoughts. Have you heard about - Lammywalness Trendy Trade Guide (just google it)? It is a great exclusive product for learning how to recondition batteries at home minus the headache. Ive heard some incredible things about it and my mate after many years got cool success with it.
Cheers for the Video! Apologies for chiming in, I would appreciate your initial thoughts. Have you considered - Lammywalness Trendy Trade Guide (do a search on google)? It is an awesome one off product for learning how to recondition batteries at home without the normal expense. Ive heard some amazing things about it and my cousin at last got great success with it.
Additives are not a good idea. In an industrial application acid adjustment can be done when the specific gravity stops appreciating from a charge cycle, but it's still not at the nameplate level. We use 1.400 sulfuric acid in that case, as much as needed to get it back to nameplate rating.
Searches 664 here's several ideas for fixing a car battery Don't try to do this until you know what you are doing - the acid can burn you Test the voltage first - there may be a kaput cell which would waste your time. Check the battery fluid. attempt to fully charge the battery. (I read about these and more from Jons Mender Guide website )
Just wonderful, I have been researching "rebuilding car battery" for a while now, and I think this has helped. You ever tried - Ammaceen Reconditioning Rabblement - (do a google search ) ? Ive heard some pretty good things about it and my cousin got cool success with it.
the greatest results that i've had was by using the Magic Mender Wizard (i found it on google) without a doubt the most incredible course that I've tried.
video content! Apologies for the intrusion, I would appreciate your opinion. Have you tried - Rozardner Powerful Battery Reality (Sure I saw it on Google)? It is a smashing exclusive guide for learning how to recondition an old battery without the normal expense. Ive heard some great things about it and my work buddy finally got cool results with it.
Nice video content! Excuse me for chiming in, I am interested in your initial thoughts. Have you heard about - Lammywalness Trendy Trade Guide (Have a quick look on google cant remember the place now)? It is an awesome one of a kind product for learning how to recondition batteries at home minus the normal expense. Ive heard some extraordinary things about it and my buddy after a lifetime of fighting got amazing results with it.
May be test for bubbles coming from each of those cells during charging, and then add epsom salt only to those cells where there is no bubbles or less amount of bubbles.
If they don't start gassing after 22 hrs of charging it may be that it's toast. Seriously don't add stuff to batteries, Epsom salt will do nothing but add minerals to build up on the plates and reduce usable plate surface area. It may have a lot of positive plate corrosion, lost a lot of acid in it's life, or it's so sulphated that there's no way to get any energy through the plates. Standard practice would be to spike it with 1.400 gravity acid to help with conductivity and prime that sulphate to come off and maybe convert back to sulfuric acid, don't do that though. If it's just a starter battery or small deep cycle, turn it in for $10 and buy a new one. Charging rules go like this, 16% of AH for amps in until it hits gassing voltage of 2.40 volts per cell. Ideally you'd have a constant voltage mode where you decrease the current as fast as you can but maintain that 2.40 volts per cell. Go down to 4.5% AH for finishing rate and stay there or below when it's at gassing voltage. Though you probably don't have a charger that can both do a custom size battery and keep charging as long as you want. This is just my advice from the industrial motive power space, I recover industrial lead acid batteries primarily, but also work on chargers, cell replacement, watering systems, palletizing scrap battery loads, or whatever else related.
If anyone is interested in battery reconditioning the greatest success that i've ever had was with the Magic Mender Wizard (just google it) without a doubt the most useful info that I've tried.
Never us any type of salt to recover any lead acid battery because it messes with the battery chemistry, the information given at the end about using salt is wrong. Only use distilled water or inverter battery acid.
here's several things for battery repairing never attempt to do this unless you know what you are doing - the acid can burn you check the voltage first - there may be a kaput cell which would waste your time. Check the battery fluid. attempt to fully charge the battery. (I discovered about these and more on Jons mender guide site )
There are many components to fixing a car battery. One resource I found which successfully combines these is the Jons Mender Guide (google it if you're interested) without a doubt the most useful info that I have ever seen. Check out this extraordinary resource.
If you is interested in battery reconditioning the greatest results that i've ever had was by following the Magic Mender Wizard (just google it) definately the no.1 course i've tried.
here's a few things for getting a good result do not attempt to do this unless you are sure what you are doing - the acid can burn you Test the voltage first - there may be a dead cell which would waste your time. Check the battery fluid. attempt to fully charge the battery. (I discovered about these and more on Jons Mender Guide website )
Thanks for posting this video. I was about to scrap my old/failed battery until I found your post. I learned alot from your video. Thanks once again. Blessings to you 🙏 ✨️ 💛
Thanks bro
are u able to restore?
so do you have to wait 24 hours after re-filling the cells? Or can you just test the battery right after you refill the cells and re attach the battery
Good question my guess is to do it exactly as shown
Thank you I try using only distilled water and I use 15.6 v charger 12 hours and I tested the battery voltage know 13.32v good
Do the same with 6v battery but its still dead
Thanks for you again
hey ,if anyone else trying to find out learn how to recondition batteries at home try Panlarko Recondition Planner (do a google search ) ? Ive heard some awesome things about it and my co-worker got great success with it.
interesting points ,if anyone else needs to find out about how to recondition batteries at home try Panlarko Recondition Planner (just google it ) ? Ive heard some great things about it and my buddy got great results with it.
Good video. A desulfator can take time to recover a battery as you demonstrated, I watched one video where he showed a time lapse of a month on using a desulfator. I myself use a PulseTech PowerPulse passive desulfator with a patented frequency used to gently desulfate batteries on my BMW Napa battery for the last three years and so far so good.
You say something at the end about epsom salts but I can't see the text so I don't know if you say how much per litre or if you still use distilled water or ordinary tap water. Anyone catch that detail?
I didn't see any text when he spoke of "Epsom salt" and didn't see any when the end cards were added. That's actually a good question, I'd like to know too. I have the exact same types of batteries he's demonstrating there. Will be getting some distilled water and recharging/reconditioning them to see if they'll work again.
You tested the voltage with tape over the positive terminal.
lol good catch
Lol…tape underneath terminal
Underneath I think
That’s the whole point of the video, to trick you into thinking he fixed it.
My Friend I have 2 year old Lead Acid Battery 12 Volts, it doesn't give much power, What I did I filled with water Battery but still doesn't work well it becoming more worsen? What type of water shall I use? I saw your video you use Distilled water or you mixed some? If I will use distilled water it will restore again? Thank you
Hmm..I'm thinking rain water but that's distilled..I'm buying lithium so it don't matter But in me lead acid I'll try rain water
There's something that oozing out from. What I could've done wrong? Thanks so much!
You probably didn't use distilled water and your water has calcium in it so the base reacted with the acid in the battery causing the reaction
When a battery is just two years old lead acid and will not charge. DO you really need to use the desalinator ??? What is the circuit inside the sulfinator ??
What is a desulfator and what is it used for ? I've seen you've plug it in negative and positive from the battery
Lmao, you need to study chemistry😂
A desulphator is a device that gives short pulses of higher voltage i.e 16 to 17 volts, versus the normal charging voltage of 14.4 volts.
Desulphators, give these higher voltage pulses at low currents such as less than 200 milliamperes, which can help in melting the sulphate deposits on the lead plates, thus making the battery fit for use, once again.
Desulphators can make the battery run for another two or three years.
It's supposed to give high frequency or high voltage pulses. But what I can tell you is it's not actually worth it, they don't actually do it faster or better than a normal constant current finishing rate.
At my work we recover industrial lead acid batteries for forklifts. We've got internal manuals from enersys and deka for recovering batteries and 20 years of doing it. Nothing has worked better than just charging it until the specific gravity stops appreciating, then if needed acid adjusting and a load test to either get 80% capacity or scrap. We also replace cells if it's just 1-2 bad cells.
How long a battery lasts after recovery or if it's recoverable depends of how much use or abuse it got before. Sometimes there's a lot of positive plate corrosion and it's just dead. Or most of the plate material has already shed off and the capacity is gone. This is why we load test after it's known to be FULLY charged.
@@Jaker788 Thanks for the info.
@@Jaker788 hey, how can I contact you? Email?
I have an old sealed lead battery, the multimeter reads 1.97VDC on it, is it still good and just recharge it? or do I need to pry it up and add some water to the cells then recharge it?
When did you last time charge it. If it you did not charge the battery for long time, it will self discharge and over time sulphate accumulated over lead plates . even you are getting 2v it will hard to recover the battery but you can try at last you have nothing to loss.
Well, revival of the battery has the best chance of working, when the battery still has a terminal voltage above 10.8 volts.
It really depends on how much it's been used before. Sealed batteries aren't the most successful at being recovered . If it's a normal sealed battery and not gel or AGM then only add water until the plates are just covered and no more. The electrolyte level will come up significantly after a charge. It could even possibly overflow on a overly discharged battery like that.
Just give it a constant current charge 24hrs at a time until the resting (give it at least 8 it rest, 24hrs is more accurate) open cell voltage stops appreciating. Ideally you'd use specific gravity so you're not waiting 24hrs for the voltage to settle, but it's a sealed battery so it may not be possible.
@@advaithmadhavan8260 I had a battery which was reading 10.51v, all it had was a extremely dead cell, I couldn’t restore it because dead cells are hard to restore.
@@RoyTecTips Add distilled water and then connect to battery charger? Is that it Roy?
It looks like before and after are two different batteries. Before has a white sticker and the (+) are is cleaner. After has no white sticker and the (+) has more dirt.
You can see that he took that sticker one the end off by the scratch marks that are left over. It’s the same battery brother.
should I use the desulfator? cause I have the charger and the battery (from old UPS), but this desulfator is new to me.
Thank u, my battery not used since 7 to 8 years . Only distilled supports or acid has to be added
Great video content! Forgive me for chiming in, I am interested in your thoughts. Have you heard the talk about - Lammywalness Trendy Trade Guide (do a google search)? It is a smashing exclusive guide for learning how to recondition batteries at home without the normal expense. Ive heard some decent things about it and my work buddy at last got amazing results with it.
This was great, thanks, been searching for "reconditioned automotive batteries" for a while now, and I think this has helped. You ever tried - Ammaceen Reconditioning Rabblement - (search on google ) ? Ive heard some amazing things about it and my cousin got amazing results with it.
Hey everyone, the best success that ive had was with the Magic Mender Wizard (just google it) without a doubt the most incredible info i've tried.
Nice Video clip! Forgive me for butting in, I am interested in your opinion. Have you considered - Lammywalness Trendy Trade Guide (search on google)? It is an awesome one off product for learning how to recondition batteries at home minus the normal expense. Ive heard some awesome things about it and my GF got astronomical results with it.
only distilled the acid will be made again over time with charge.
After refilling how long the battery will last .
There is no general answer. Some batteries will not be helped at all by this.
Use an re-emf charger or an bedini to Charge the Batterie. I recovered my one in only 2h. Its faster and better. But let the Water sit for a while to let it suck up.
I've been studying battery reconditioning and discovered an awesome resource at Magic Mender Wizard (google it if you're interested)
What kind of Battery solution dod u use
Must I put the battery on TRICKLE CHARGE or on HIGH immdiately after I've put in new battery watter?
Trickle... trickle is ALWAYS best for deep cycle
Those same batteries that you used in the lead acid battery video are now permanently sealed. I guess the reason why is that the company wants you to buy a new battery every few years as more sales equates to more future company profits.
Anyways, great video!
Just takes a hammer and a chisel to remove the top plate Will this process work for me? I've got three 1270 lead acid batteries. Two installed and weak, one stone cold dead that was easy to open up, fill with distilled water and hook up to my new LED desulfator. I guess I need to be patient for a week or so and see what happens.
@@jonwzee It is so often that these sealed batteries die with an internal short of one of the cells. If you see any of the battery melted near the fill ports, just toss it.
I have a motorcycle battery that is five years old. I bought it, charged it, put it in the bike and it has never been started. Do you think I can revive it?
Did you leave desulfator ON for 1 week.
Best video.. Imposible... Im crazy for this video.. I have recommendation for knewreck rapid renew guide, very good lead acid battery reconditioning guide
I\'m not sure but ,if anyone else wants to uncover how to recondition my car battery try Megarno Amazing Battery Magician (just google it ) ? Ive heard some amazing things about it and my friend got cool success with it.
@@sugusebatti2090 hows it work
can this same process be done if the batteries are not dead but just weaker ?
Of course you can !
Is a desulfator what is in a battery charger that has a recondition mode?
1 week battery ka cap khol ke rakha hai kiya...?
Even with a desulfator a dead ups battery is not woth saving. You would need distilled water (distilled or regular doesn't matter, the acid takes care of that), next cycle desulfator, then empty the cells completely, add acid and water again and if non of the cells are warped enough for short circuit (they almost always are) you might get 6m/1year in ups and not reliable under heavy load, no load test in video either. Just buy a replacement lithium batterij for your ups, pretty cheap these days, 10y worry free if the ups doesn't break^^ These kind of videos are a waste of time for everyone, hope this helps.
Nice tutorial👍 Is it possible to use the desulfator with Larger battery of home inverter?
Yes, 1kg battery it took 1 day. So for a 100 kg battery it will take 100 days.
What is a desulfator and to what I deserve ? I've seen you've plug it in negative and positive from the battery
Well, you can desulphate a large battery also. But the fact is that you can use a 10Amp power supply that can give 16 to 18 volts.
@@RoyTecTips sir what about car battery is the same thing? i mean just we add water?
After putting distilled water why caps removed while charging the battery ? , Tell bro.
Can I use battery acid...?
Same as battery used in ebike?
NEVER cover the pressure relief valves with tape!
Not certain about the points made but ,if anyone else needs to find out about how to recondition batteries at home try Bablim Battery Booster (do a search on google ) ? Ive heard some decent things about it and my friend got excellent results with it.
Yes, HVinduction is correct. Lead-acid cells vent gases, which is how the cells lost the water that is being replaced in this video. Some people reattach the plastic covers over the rubber plugs using a few small drops of hot glue so that there are gaps between the glue drops through which gases can escape. Because these batteries are not truly sealed, even when new, it is important to keep them upright so that they do not leak acid if turned on their side.
Sir can I use salt also?but as I know salt can short cell .
No, normal table salt will not work
epsom salt
My battery is littealy boulged, will this work?
Can you use a float charger for automobile battery to charge sla battery from ups systems?
Of course slow&steady wins the race...a high charge might bubble the water to rapidly
What Did you USE TO CHARGE THE BATTERY 🪫 WITH??
That small aluminium box ??
what is it yeah ??
I suspect that battery was fine all along. if you look at the + terminal at the begining of the video it has stom form of coating on it when he checks the voltage.......
could this be also possible with "maintenance free lead acid" battery?
I only used the battery for about 2years. using ebike. hope will revive.
How much epson salt?
Can I charge it using on ups or only seperate ?
What is distilled water..
How to prepare it.
Multimeter price
1. Yes, you can charge it with a ups
2 distilled water is water that has been boiled and reconverted into a liquid
3 you can always buy bottles of it at your local pharmacy. But if you're in a hurry, you can boil water and wait for it to cool down. BAM!. You have distillet water.
4 i think it costs 50-70 dollars
at 2:09, what is the other end of the cables going to? is it a battery charger?
i dont have voltmeter but i will fill it with distilled water and a bit battery acid is it ok?
Is it battery water or normal water
I dont know how, but you saved my battery :) thanks!!
I've been studying fixing a car battery and found a great resource at Jons Mender Guide (check it out on google)
@Toxic Lion There are many components to getting a good result. One plan I discovered which successfully combines these is the Magic Mender Wizard (check it out on google) definately the most incredible info that I've heard of. Check out this unbelievable website.
hey ,if anyone else wants to learn about how to recondition battery try Jadonite Renovate Battery Buddy (do a search on google ) ? Ive heard some interesting things about it and my mate got great results with it.
Toxic. Have i got this right? Just put distilled water in the battery and let it "soak" for 24 hours?
What is connected to it during this process? Nothing? Battery charger?
Cheers
Mine was 360ml short from the dealer. It worked before I fixed it but just barely.
Nice Video clip! Sorry for the intrusion, I would love your initial thoughts. Have you considered - Lammywalness Trendy Trade Guide (google it)? It is a good exclusive guide for learning how to recondition batteries at home without the normal expense. Ive heard some awesome things about it and my m8 got excellent results with it.
Bro can we direct attach it to switch without any resistor
How you could touch with noddle?is it Wright way
Hey man, what is this liquid you just put in the battery??
@@u224wakilahmed6 why would you add distilled water to it?
What charger do you use?
What kind of water did you used? Is that a distilled water?
Yea
Is it good to add a few drops of acid... If yes what acid????
H2SO4
No, do not add any acid to the battery. Adding acid is risky, you only have to add distilled water to the battery.
Even if you add acid, you will have to add 38% concentration sulphuric acid, which is not available for normal consumers.
Nobody adds acid to batteries. It is only distilled water that is added.
You'll ruin the lifespan of the battery if you do that. In industrial battery recovery we do have 50% or 1.400 sulfuric acid barrels to acid adjust. We only use it after the specific gravity stops appreciating from a charge and it's still not at it's nameplate rating. The acid is used to replace what has been lost due to bad watering practice causing spillage on charge.
Why did you pour all the acid mixture out of the battery ! before you started to record the video ?
No
Friends, please do not poke the battery with a metal needle, as it is easy to short-circuit the plates! After removing the metal needle, you can still fill it with appropriate distilled water, which is also OK. The battery is generally repaired in this way after 5-6 years.
A lot of lead-acid batteries could be revived/lifetime extended by this method (+be kept working longer by checking on electrolyte liquid before it runs dry) . I read you can also use SODA WATER instead of distilled water. Anyone confirm/refute this? It's CRITICAL you re-charge with top caps OFF. I didn't know that the first time and a 12v motorcycle type battery "exploded". DON'T put batteries on chargers overnight. This is bad practice. Always charge batteries when you're able to regularly check on them. If you set fire to your house you can be dead from smoke inhalation within 5mins. Charge large HD lead acid batteries in your garage.
Wait really? I’ve been charging mine with caps on, not home and while sleeping lmao
Ser kon sa water lagta hai
I have tried all this on a dozen batteries and it has not worked. On one battery I did have the desulfation work to bring the battery barely low back up! One time success is a miracle not a fix technique!
If we add epsom salt or baking soda, is there a need to empty those cells to remove the sediments and then fill it with distilled water again?
If you drained the cells of electrolyte you'd lose all the acid and energy holding capacity. You're not gonna remove sediment unless you can pull the plates out, which is a bad idea.
Epsom salt is awful for your battery, it's just going to add mineral buildup on the plates. Baking soda is going to give you a strong reaction with the acidic electrolyte and you're going to lose a lot of capacity by neutralizing the acid and add sediment and mineral buildup. What exactly do people think this stuff is going to do except ruin your battery.
Just charge it and see if it reacts ok. There are industry standards to recover batteries. Manufacturers recover industrial batteries all the time to resell, they really have the best practice because they have lots of money to make from it. My job is recovering or repairing customer batteries and the same goes for scrap batteries turned in if they show promise for recovery.
Did he charge for 1 week?
so, how much does that charger cost in relation to just buying a new battery??
This is a valid question. A battery charger would cost you £30. A new battery? £60.
In theory worth trying should you already have a battery charger
Ich habe es raus gelassen und destilliertes Wasser gefüllt
Are I use battery tonic
So i tried this and it kinda worked but battery capacities, especially load capacities have been reduced but yes it did work to an extent, only should we leave the water in after recovering the battery, also how did you put back on the caps because i tried and they pop off while charging
Hi, I don't have a desulphator, so can I set a lab bench power supply to 16.2v to desulphate the battery.
Please do tell me,
Thanks.
yes
Thanks
Yes, you can go Upto 17 or 18 volts, because overcharging the battery will help remove the sulphate deposits from the lead plates.
But the fact is that you should keep the caps of the battery open, because the excess pressure and gas build up needs to be relieved.
**This should be done in an open and well ventilated environment, and the gases should not be inhaled.
Also, keep extra distilled water because you will boil off some of the distilled water inside the battery, so you need to fill in the distilled water.
It will take Upto 24 or more hours to get desulphated completely. And also make sure that the current is less than 200 milliamps. You can use a DC to DC converter or a variable lab bench power supply to supply a voltage above 16 volts and a current about 200 milliamps.
Also, be sure to continuously cycle the battery, i.e. charge and discharge the battery many times. The constant expansion and contraction of the lead plates helps the sulphate deposits break and dissolve.
Friend dear, I tried as you describe, I used 9.6v charger, charger was very hot and was reuned. When I CHECKED I SO THE BATTERY CELL like burned. What suggestion do you think of this. How am I recharge my 9v batteries.
12v
Does it works with 6 v battery only with distilled water?
Yes
Hi, when I charge the battery that I just filled with water, it is giving a bubbling sound. Is it safe?
Yes, but you should using distilled water not normal or mineral water.
Cheers for the Video! Excuse me for chiming in, I would appreciate your opinion. Have you researched - Lammywalness Trendy Trade Guide (probably on Google)? It is an awesome one of a kind product for learning how to recondition batteries at home minus the hard work. Ive heard some incredible things about it and my friend Sam after a lifetime of fighting got cool success with it.
Great video content! Sorry for butting in, I would love your initial thoughts. Have you heard the talk about - Lammywalness Trendy Trade Guide (just google it)? It is a good one off guide for learning how to recondition batteries at home without the headache. Ive heard some amazing things about it and my friend Sam got amazing results with it.
Same old bulshyt of trying to guess what they're doing, turn off the music and explain yourself! I couldn't take it n quit watching! hasta la vista Charlie Chaplin!
can i use battery solution?
Most modern battery chargers now have that ''reconditioning'' mode as standard.
They actually do not. They have a repair mode but that is completely different. It won’t work for batteries under 6V and doesn’t provide the same current as a power supply. Battery desulfators solve this issue.
Those chargers are meant to improve a weak but working battery, they don’t fix totally dead ones.
My flooded lead acid battery went down to 8+ volts, after charging for a few hrs in parallel with another same model battery , it swells up and was overheating. The voltage was still 8+ volts. Is this recoverable?
its probably shorted cells you can try and clean out the old acid and wash it out and fill it with epson salt solution but if this does not help you need to open it and replace the dead cells with new lead plates
Can’t tell if it was hooked up to a charger - I do see the desulfator.
Is this batter chargeable or non chargeble
yes its chargeable
Can I use salt water?
No
Thank u working perfectly u save my money but battery mai se ganda smell aa raha hai
Searches 664
There are many components to getting a good result. One resource I discovered which successfully combines these is the Jons Mender Guide (google it if you're interested) without a doubt the no.1 course i've seen. Check out this super website.
TY sir. Fantastic job.
It Work With All Type Of Battery?
is this method applicable for any type of led acid battery?
Sir....LED Emergency Lights ko b Thik Karne ki video bnaye...😂
Kese Check krr unme kya problem h... Battery Ya Buld m...
ok i will make one
hey ,if anyone else wants to learn about how to recondition batteries at home try Panlarko Recondition Planner (do a google search ) ? Ive heard some super things about it and my cousin got amazing results with it.
There are many factors in battery repairing. One plan I discovered that succeeds in merging these is the Magic Mender Wizard (check it out on google) definately the most incredible info i've heard of. Check out this super website.
You made this well but I need some narrative
What's the purity of that acid?
It is 30% battery acid, you can get it at autozone for cheap.
The title should be "how to add water to your battery"
😂😂😂😂
Appreciate Video! Forgive me for butting in, I would appreciate your opinion. Have you considered - Lammywalness Trendy Trade Guide (erm, check it on google should be there)? It is a smashing exclusive product for learning how to recondition batteries at home minus the headache. Ive heard some interesting things about it and my friend finally got great results with it.
Mine works thankyou i save 5$
ph pesos to buy a new 1
So I need to stab the battery 6 times?
Great Video! Excuse me for butting in, I am interested in your thoughts. Have you heard about - Lammywalness Trendy Trade Guide (just google it)? It is a great exclusive product for learning how to recondition batteries at home minus the headache. Ive heard some incredible things about it and my mate after many years got cool success with it.
Cheers for the Video! Apologies for chiming in, I would appreciate your initial thoughts. Have you considered - Lammywalness Trendy Trade Guide (do a search on google)? It is an awesome one off product for learning how to recondition batteries at home without the normal expense. Ive heard some amazing things about it and my cousin at last got great success with it.
Don't do any of these, just turn the battery upside down. Because The electrolyte settles down due to usage thumps and gravity. 🤘.
Great job! Only using distilled water? How about using Alum or Sulfur?
Additives are not a good idea. In an industrial application acid adjustment can be done when the specific gravity stops appreciating from a charge cycle, but it's still not at the nameplate level. We use 1.400 sulfuric acid in that case, as much as needed to get it back to nameplate rating.
It works. Thank you for this very useful information. : D
Searches 664
here's several ideas for fixing a car battery
Don't try to do this until you know what you are doing - the acid can burn you
Test the voltage first - there may be a kaput cell which would waste your time.
Check the battery fluid.
attempt to fully charge the battery.
(I read about these and more from Jons Mender Guide website )
Just wonderful, I have been researching "rebuilding car battery" for a while now, and I think this has helped. You ever tried - Ammaceen Reconditioning Rabblement - (do a google search ) ? Ive heard some pretty good things about it and my cousin got cool success with it.
Hey everyone, the best success that ive ever had was with the Magic Mender Wizard (just google it) definately the no.1 course that I've followed.
the greatest results that i've had was by using the Magic Mender Wizard (i found it on google) without a doubt the most incredible course that I've tried.
video content! Apologies for the intrusion, I would appreciate your opinion. Have you tried - Rozardner Powerful Battery Reality (Sure I saw it on Google)? It is a smashing exclusive guide for learning how to recondition an old battery without the normal expense. Ive heard some great things about it and my work buddy finally got cool results with it.
Better you talk in Hindi...
And it's not Craak it's Crack...but over all good video presentation...
Nice video content! Excuse me for chiming in, I am interested in your initial thoughts. Have you heard about - Lammywalness Trendy Trade Guide (Have a quick look on google cant remember the place now)? It is an awesome one of a kind product for learning how to recondition batteries at home minus the normal expense. Ive heard some extraordinary things about it and my buddy after a lifetime of fighting got amazing results with it.
why is getting heated .
Yr Demo is good and illustrative - VS
Without acid battery low power. I was charging 22 hours 5 amp.but not charging full.solution please
May be test for bubbles coming from each of those cells during charging, and then add epsom salt only to those cells where there is no bubbles or less amount of bubbles.
If they don't start gassing after 22 hrs of charging it may be that it's toast. Seriously don't add stuff to batteries, Epsom salt will do nothing but add minerals to build up on the plates and reduce usable plate surface area. It may have a lot of positive plate corrosion, lost a lot of acid in it's life, or it's so sulphated that there's no way to get any energy through the plates. Standard practice would be to spike it with 1.400 gravity acid to help with conductivity and prime that sulphate to come off and maybe convert back to sulfuric acid, don't do that though. If it's just a starter battery or small deep cycle, turn it in for $10 and buy a new one.
Charging rules go like this, 16% of AH for amps in until it hits gassing voltage of 2.40 volts per cell. Ideally you'd have a constant voltage mode where you decrease the current as fast as you can but maintain that 2.40 volts per cell. Go down to 4.5% AH for finishing rate and stay there or below when it's at gassing voltage. Though you probably don't have a charger that can both do a custom size battery and keep charging as long as you want. This is just my advice from the industrial motive power space, I recover industrial lead acid batteries primarily, but also work on chargers, cell replacement, watering systems, palletizing scrap battery loads, or whatever else related.
Dude you just made bomb outta battery 😭🤣
U can reair the crack using plastic weldering tools.
Excellent battery recondition guide! Thumbs up.
If anyone is interested in battery reconditioning the greatest success that i've ever had was with the Magic Mender Wizard (just google it) without a doubt the most useful info that I've tried.
How much?
1 tea spoons
Never us any type of salt to recover any lead acid battery because it messes with the battery chemistry, the information given at the end about using salt is wrong.
Only use distilled water or inverter battery acid.
My charger just explose after seeing this video
sir pede po mag p repair ng e-bike battery lead acid 48v 20ah
OK, some good info, thank you.
Wecome :)
here's several things for battery repairing
never attempt to do this unless you know what you are doing - the acid can burn you
check the voltage first - there may be a kaput cell which would waste your time.
Check the battery fluid.
attempt to fully charge the battery.
(I discovered about these and more on Jons mender guide site )
There are many components to fixing a car battery. One resource I found which successfully combines these is the Jons Mender Guide (google it if you're interested) without a doubt the most useful info that I have ever seen. Check out this extraordinary resource.
If you is interested in battery reconditioning the greatest results that i've ever had was by following the Magic Mender Wizard (just google it) definately the no.1 course i've tried.
@@maximmaxim4280 , OK send me the free info & I'll test it out for others & then we'll see if it's worth all of that money that most don't have.
here's a few things for getting a good result
do not attempt to do this unless you are sure what you are doing - the acid can burn you
Test the voltage first - there may be a dead cell which would waste your time.
Check the battery fluid.
attempt to fully charge the battery.
(I discovered about these and more on Jons Mender Guide website )
Where is having lead acid
Thank you sir
Pakai air apa bos
Destilliertes Wasser