How to Install Dual Brake Calipers
Вставка
- Опубліковано 9 чер 2024
- Brake Calipers. Learn how to install dual brake caliper brackets and dual brake calipers as well as replace the differential fluid, replace the rear wheel bearing, and the replace the bearing seal on your car or truck. This process works on a live rear axle. I am prepping my drift car for this upcoming season by installing a dual rear brake caliper setup so I can use a hydro ebrake.
How to Install a Hydro Ebrake: • How to Install a Hydro...
How to Properly use RTV: • How to use RTV and pro...
How to Flush and Bleed Your Brakes: • How to do a Complete B...
Again, thanks Advance Auto Parts for providing Carquest Wearever Brake Parts for the rear of the DriftStang:
Calipers: advanceautoparts.rt8x.net/O7gVr
Brake Pads: advanceautoparts.rt8x.net/2ZEba
Rotors (2008 and newer models are painted): advanceautoparts.rt8x.net/3gn6k
→ Become a ChrisFix Subscriber: ua-cam.com/users/subscription_c...
→ Instagram: / chrisfixit
→ Facebook: / chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. This video was supported by Advance Auto Parts and all opinions are truthfully my own. I already shop there and use their brakes on my cars so it was a perfect fit! ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. - Авто та транспорт
This is why I turn my notification bell on for your channel. I know you put a ton of work into your videos but wow dude, I am not sure who else saw how clean the suspension looked, all the painted parts, the calipers, etc... You go way above and beyond and that is why I love this channel! Your attention to detail is exceptional.
I pinned my own comment but changed my mind when I read this! Thanks Joey! That really means a lot!
No way! I cannot believe you pinned my comment. Thanks Chris.
I second that, Joey!!
Its amazing how you have all this knowledge. Were you a mechanic before youtube?
love from indonesia.. keep it up man
I came out of curiosity to see what a dual caliper setup was, I left learning how to fix a rear axle seal that I really need to fix in my car. Great video as always.
+Eduardo Serrato that's awesome! Glad the video was helpful!
It must be so funny watching you film, "Now we're gonna go from this..." *four hours later* "...to this*
haha sometimes I wish it was only 4hrs
His voice has time to go through an entire puberty before "...to this". One day it's gonna be all old and raspy. xD
@@chrisfix Do a project that'll take you 20 to 30 years and make it happen.
@@chrisfix hi
Not really cause of editing he could say it and put the picture
Anyone else thinking "I just learned about another part of my car that can go bad."
It's a quite a miracle that any car stays on the road for over 6 months with all the parts that have to stay kosher.
To make your car 'kosher' cut off the best 20% of your car and throw it away.
Can i afford this? No
Did i need this ? No
Did i watch the entire video? Hell yes
Hotel? Trivago
Lol
Harun ALJabbar I do have a car. Do need help but I still won’t do it myself 😂
i wasnt expecting that lol
Harun ALJabbar lol
lol
I don't even own a car I just like watching this stuff
Thanks! Glad you enjoy the videos!
same
ChrisFix Same but i help my dad im a 11 years old i was a mini mechanic i can replace oil,checking fuses cleaning air filters,replacing intakes
Me too
I watch and I'm just a kid
Dual calipers are also a lot smarter than tapping into the existing rear caliper lines. You don't risk losing all your brakes if something goes wrong.
Also in some countries it's just plain illegal to modify the existing braking system, so this standalone system gets around that which is awesome!
Thanks for all the effort you put into your videos Chris!
My Favorite Mechanics
1. ChrisFix
2. ChrisFix
3. ChrisFix
Sorry I'm tired of typing ChrisFix but he is still the king .......
My favourite mechanic 👨🔧 IS Miroslav kumljn.
You said mechanics not mechanic
Thanks everyone and I hope you enjoyed the video!! You can find updates on my social media to see when videos will go live and what is up in ChrisFix land.
Instagram→ instagram.com/chrisfixit
Facebook→ facebook.com/chrisfix8
ChrisFix Beautiful 😉
Ur awesome
ChrisFix Good I have my exams so just watch your videos
what editing software do you use
ChrisFix welcome back . I love your channel, very informative and very professional. Makes me wanna get a project car , I just bought a 2014 pursuit charger so Il build that up first 😂
who else watches his vids just because you r interested in cars and dont have car or dont need help?
Thanks for the support! Hopefully you still learn a lot!
DACHI YT me!
me too :), also i have learned new things ( sandpaper, polish and paint scratches video )
Me.
DACHI YT me so i can persuade my parents to let me :)
Awesome, legit, you are by far the best teacher, instructor, videographer on car mechanics.
Attention to details, clear & precise voice, no shakey camera, but most of all your humble & not conceited.
Great work & honestly you should be teaching automotive repair classes. I think you would definitely succeed in everything you do. A master to most but a student to all.
Thanks a lot!
went into this thinking "I don't need dual calipers" to "so that's how you replace those bearings"
right? been searching all over for a how to replace rear bearings on a rear wheel drive but couldnt find anything good. had no idea it would include messing with the differential or taking out the axle
:DD y
I'm not even considering mounting dual brake calipers, and still I ended up here. Watching the entire video. Hypnotizing. :)
I am glad you enjoyed the video!
I admit I never seen a dual caliber setup before. Most would simply go for a single fixed 2 piston upgrade, but a dual setup is new to me. Very informative.
Glad you enjoyed the video!
I started out watching how to clean an engine....but this how to clip is insanely awesome...an average guy like me can get into the gear box...change the differential oils...change the bearings...even add dual brakes if I wanna...crazy!
I like how he diassembled his whole suspension to paint it for 5 seconds of footage, now THATS dedication
I dont have a RWD but now Im a mechanic. thanks to UA-cam. very informative!! no mechanic can fool me now.
Glad the videos are helpful!
ChrisFix I'm pretty sure you've made a few people mechanics!!
team do not bother me correction: alot
That kinda thinking's gonna get ya fooled! ;)
me too hahaha
This has to be the best DIY car channel on youtube.
Thanks a lot!
I definitely second that.
1:51 "all that using common hand tools"
5:53 "it does require a set of specialty tools"
thats to replace the bearings :)
Its not for the thing that you came to watch
besides, he says, you can rent them for free at the local part stores
@@szepikeeh That being said, that's fine if you're in 'murica. I know of nowhere that'll allow you to rent these tools affordably, let alone for free. Probably £40 to borrow the slide hammer for a day and £30 for the driver kit.
@@szepikeeh Not sure where the hell I'd rent them for FREE in the UK. Local part stores here sure as hell won't
hey Chris! I just wanted to thank you for your videos, which encouraged me to take a 2 year mechanics course. I just passed the first module which is introductory, and now the second module is about brakes...I had no idea about all the physics involved and math formulas like calculating deceleration...anyways, thank you again and keep it up man!
Ask God almighty for the Holy Spirit
What course are you using?
I have many subscriptions. But out of all em. yours are the ones I only wait eagerly for. the amount of hard work you put in phenomenal. I pray for your success and may you reach unimaginable heights.
Thanks a lot man! I really appreciate it!
ChrisFix add soapy wooter for extra brake power
Your a LEGEND!
i like my soapy wooter
rofl
,,,
It also ads some horse power I believe an extra 10
As a kid that's about to get a new car I want to thank you for these videos. After I watch these videos I feel so confident and that I could fix whatever goes wrong. My moms van actually need new wheel bearings (if I remember correctly) and it was when everything needed maintenance on her van. So she had to pay way over $1,000 for all the stuff that had to be done. Now seeing this I feel like I could've done it for a less.
Chris, do you think you could leave a link to your magic snappers in the description? It would be really helpful.
What's snappers?
When he snaps his fingers
Yes, please. It would save me hours! I think the secret is in the gloves.
I just found your channel. I really like your clear, confident, professional speaking. you earned my sub, saying alto because I'm a Honda guy ;)
Thanks a lot!
I don't own a car, I am 14. I don't drive or work on cars. Yet every time I see a new video I stop what I'm doing and start watching it till its done now matter what happens.
Tristan Keith same here
Tristan Keith never too early to start learning! this is actually the best time for you before you actually have a car in your hands with a problem you don't know how to fix
Thanks for the support Tristan! I hope you are learning a lot because by the time you drive, you will know more about cars than most people on the road!!!
Tristan Keith same here
this stuff is too good not watch :D (I'm 16 btw)
you are one of the few youtubers that explains exactly how to do it, step by step! I liked your video. these are the videos you always want to find when you need help! Thank you
What I can appreciate is, the man uses basic hand tools to prove anyone can make repairs, save some money and learn something along the way
Great content Chris Fix
your tutorials are really high quality. great job!
Thanks!
Where is your capital letters on your comment??????????
@@kristinakaravajeva8879 they left to get milk
The level of detail and specifications that you give in each upload are well appreciated. I cant express enough how much your videos help me to fully understand the process and the correct way to attack an issue. Thx man 👍 couldnt do it without you.
Alright...it's a very nice video tutorial Chrisfix,now I have a knowledge how to install a dual brake caliper in the car.ur a very good mechanic instructor Chrisfix,I wish I will be ur mechanic assistant someday.😀
Thanks a lot!
0:34 is the clearest view of Chris fix that we’ll ever get. Just noticed that rewatching this.
gotta wait for that 1080p ;)
Finally people are starting to understand how UA-cam works! lol
yes
MyPandaRawrs You know your damn early when its at 360p
MyPandaRawrs yup
just casually spamming F5
I have no need to do 99.9% of things you show in your videos, but they are so well done, and interesting, I watch every one of them all the way through. Excellent job with your videos!
Thank you. I am glad that you find the videos helpful!
Does anyone else want duel stock calipers now?
dual*
Me.
Hell yeah, definitely adding them to my 95 Mustang gt
Me.
Yeah!
It's amazing something so small holds your axles in. I have never heard of a C bracket before. I will hopefully never have to deal with something like this but it is cool as hell to see....
Why the hell am I watching this? I don't even own a car and it's 12pm..... xD
Time to buy a car, friend!
I don't even own a RWD or AWD car but this video was still interesting
Mārtiņš Balodis where are you from its only 6:30 where I live
GO TRUMP europa
GO TRUMP same here. 7:07pm now
I can smell the diff fluid through my phone
ewwwww
should probably check your battery lol
Ugh that smell! Like... Carrots and Throwup! Even stink would say that stinks!
strong bad reffrence? idk if you were, because ive been watching a lot of that lately, and i could just be assuming
Kendrick .minchew if you ever smelled dif fluid before, you actually kinda can
All I can say is EXCELLENT !!!Happy you included the dual brake part for those of us that just wanted dual calipers.
This guy is really good, learning a lot of things from him, wish he was in BC somewhere
He made it seem sooo easy....
+Cristian Pinto it is easy
It is it's just that Im lazy. Love your videos Chris!
pretty sure u dont even have a car lul
I also wish I could snap my fingers and my stuff gets done. Man that would help heaps.
It is easy as long as you know what your doing
you were good in the beginning Chris but now you are simply the best at video production. I wish you delved into more intricate projects like engine building, manual trans repair etc. maybe get a cameraman for those big gigs. but it's nice to see how popular you've become in such a relatively short time. Hard work definitely pays off
+affane78 thanks a lot! That really means a lot!
+affane78 thanks a lot! That really means a lot!
can we just thank Chris how he teached us and told every single step...Thank You Chris!!
Chris, you're really amazing, we appreciate your devotion
10 minutes in and I’m completely dumbfounded by how amazingly well you cleaned the diff. Insane, great video man, will be doing something like this very soon
I'm a simple person. I see a ChrisFix video in my notifications, and I click like. Then I watch even though I have no car
Thanks a lot for the support!
ChrisFix :)
I've saved thousands of dollars doing repairs in my cars my self just by watching your videos. Thanks
NEVER IN MY LIFE OF 29 years have i seen such an amazing DIY and so helpful jesus i’m super happy i subscribed i wish i could subscribes another 10 times ur videos are amazing dude thanks
Wow, I just gotta get a duel rear braking system. Your videos are on point
Awesome and thanks!
Dual brake capilers exist? WOW I learned something new today (i don´t have a car or license, but this is interesting), you earned a new subcriber
Jakub Pollák there are cars with pistons all around the rotor.
Jakub Pollák keep watching and learn as much as you can! Best thing you can do for yourself. Saves you a ton of money. What he just did would easily been 1k. Maybe more. I'm 50 now and still love playing in the garage.
Wow! I have been watching your videos for a long time and just wanted to say good job man! I learn so much from you. Which helps me make more money. I love how professional, clean, and detailed you are. Also, its not easy to keep someone watching a video for 15 minutes and be interested the whole way through. Amazing job man! Thanks for the entertainment and information!
man i love your videos so much. I learnt more about cars in 3 days watching your videos than ever before. I love the mechanical details you show. Thank you!!
I'm glad you like the videos and you've learned a lot from them! Thanks a lot!
Learned a lot by watching this video - great step-by-step process on how to install and service the rear differential and installation of new calipers. Thank you for sharing!
Always use lubricant while driving your bearings in.
#truth
That is what she said.
ChrisFix do you still have your Ford ranger
+Log farhathami?
Ik you probably won't see this since it's from a bit ago, but Im in a terrible place rn and severely depressed but your videos actually calm me and inspire me! Your always so happy and positive and you put sm work into these vids. All in all thank you so much
I hope you're doing better man
same
Same
It will get better, don't worry
Many of us have been. Sorry and hope your getting by
This is a very common solution!
Thank you for such a detailed description.
The key point is to find a faceplate for your car or draw it yourself and order production.
Can't recall seeing of a better UA-cam video: to the point, clear, concise, useful and essential tips, very well put together. Cudos!
Videos like this is why I have post notifications turned on for your channel!
Thanks a lot man!
ChrisFix no problem!
The planification and edition of this video is flawless! Great work!
Found this while researching how to fix a leak in my Toyota Prado diff.
In my case the diff is leaking at the input shaft.
Liked the methodology. Solid.
Man I wish u were doing these videos back when I was an apprentice. My manager didn't show me shit and all I learned was from other mechanics at the shop and just trial & error.
Ur doing an awesome job bruh ! Keep it up👍🏼
Loving your videos keep up the amazing work! I'm super excited about the DriftStang project!
+Zachary Halls thanks a lot
24 secods ago...
ChrisFix I was wondering if you were able to use thread locker on the fill hole of the diff. Is it recommended or not?
WOW... that little C Clip is the only thing holding the axle in?
Yes but it is pretty thick and wedged in there tight once the pin is in. But it is interesting how that works!
just asking do you have a video out how to change drum breaks to a Calipers set up and some info about different calipers like single calipers to 4 or 6 calipers set up
ChrisFix are you ever going to weld to diff
hell its only a pin holding the front nut from coming off on most cars
Solid tips and instruction here. I have been watching and referencing you (well made) videos for years.
Keep up the good work, Chris
👍
I like the atention to detail, the way you clean the components and the paint them... I usually do the same when i work on my trucks. that is what separate the average guy to someone who likes to take care of their vehicles. nice job man .
Love your videos dude, I might never repair my own car but I learn a lot just watching you disassembling and reassembling everything. You're the best!!!
Hey man I appreciate the vid it helped out a lot thanks
Love your Channel Chris! I just do the basic stuff but love seeing these projects--just for interest and learning.
Chris, this is the first video I watched from your channel and already subscribed. You have done a great job explaining step-by-step guide of each part and that is of much help for people who are learning.
Thanks! ;)
"Always use lubricant"
Always good advice
#truth
I’m glad you started this channel! Great videos! Did you ever make a video on how to measure rotors when they are out of round, or warped etc? Plus, did you ever convert drum breaks into disk on that project car that you had? Thanks!
Thx for the vids Chris watching these has taught me so much I was able to help my dad work on his truck alot
Really good video. I don't even own a Mustang and I watched the whole video. Thanks
I own the same car as you do and I am doing whatever you do to yours to mine.
Except your actually paying for all the stuff!
dream big buddy. your not a day over 12, based on your channel
@@Evanamartin 😂😂
Dream big, kid.
Bullshit
Why I love your channel! Straight to the point.
Thanks Roger!
I don't understand why anyone would be interested in drifting a car or drifting as a "sport", it's dull and boring but it didn't stop me watching this video as I'd never heard of dual brake calipers before. Well done sir...
Hi dude, i am a new subscriber, all i wanna say is, apart of your attention to detail, the way you explain makes me feel like i can do it now with no fear. Awesome work you do, thanks for those videos.
Love this channel. Great vid, Chris!
Thanks!
Best SN95 how to videos on UA-cam.
Thanks!
I am definitly never doing that to my car but it is so entertaining to watch your videos. Cheers!
I specifically love to see your videos because of your easy teaching ways
Your vids are incredible you show the behind the scenes of cars
Thanks a lot!
Great Video ChrisFix, very detailed. Cant wait to see your drum to disc conversion.
+Marlon McLaren thanks!!!
Hi, dude, every work after your explantations, it starts looking simple and easy, or at least very clear. Thanks a lot.
Woow, nice video, thanks a million times for this modification procedures and it so helpful for everybody.
hey that was a really great tutorial, can you make a tutorial how to convert the rear drum brake to a disc brake if its possible?
dude I keep snapping my fingers and my caliper stays the same :) awsome video
This video is great! Thank you for ALL of them! The best of the best!!
i got a sn95 and i'm currently converting it to a rally car and am loving these vids
Those Red calipers add 10 More BHP...... Each!
Im thinking more like 15hp total but we do have 4 now and they are on the rear wheels!!!
Pedro Sales
Meanwhile, Brembo brake calipers add an extra 150 hp.
Happy to see this : )
360p SQUAD
Awesome!
Wow you replied
Good morning Mr. Chris fixed it on a say thank you your videos have been very helpful I am currently trying to convert my S10 extreme into a drift truck. I've watched your hydro break installation video about 10 times and your dual caliper video about 10 times.
This is level 100, I can't do it, but I still love watching it :)
Nope,
It doesn't look that difficult..
Every time I look for one video I watch another. EVERYTIME
Never a bad thing to be educated on different subjects :p
@@chrisfix hi Chris when are u doing a video all about welders and welding helmets I want you to do it today at 3-3:30
Great video!!
This is incredible that just by fixing cars you get 7 million subscribers and i am new to this channel but wow i have learned a lot about cars congrats man!
Hi Chris I truly enjoy your teaching videos. Before putting the axle shaft back in - I would clean the shaft area where the axle seal would normally be. A ring of dirt could be around the axle where the old seal would be and could cut the new seal causing leaks.
Chris the type of guy to give his old dish washer a paint job
YO where did you but your dual caliper brackets from??? I'm trying to do the same thing!
You explain things very well with easy to follow instructions
Really cool idea, not just for drift purposes but aesthetics as well.