How To Make Hardwood Flooring
Вставка
- Опубліковано 28 сер 2024
- In this video we show you the process of taking a unfinished board and turn it into a piece of hardwood flooring.
Hill Farms is a Christmas Tree Farm located between the Poconos and the Lehigh Valley. We will be celebrating our 81st harvest season this year!
Get Real at Hill Farms!
Visit us on our website: www.hillfarms.com
I am making some flooring from a walnut tree and some white oak trees on a property I own, just looking at how it is done by others as the wood cures. I have been practicing with other species as I am making an oak and walnut floor specifically for my new home. A bit envious of the 4 sided moulder. My saws are simpler, chainsaw mill, an old U.S. bandsaw from the 50's and a tablesaw cast and machined in Elyria, Ohio, my planer is a bit smaller of the same brand, and I am forced to use a slower router table for the tongue and groove and relief as that is what I have with some Yonico flooring bits. It is going very slowly here, but my test batches are working out. I can see that the routing is the bottleneck for me but this is a one off for me for my own home so I will muscle through all of these pieces. I hope that you guys are doing well out in PA.
I like to see real working,explanation from worker,machine that make noise,dust...to understand what is working.Great job !Respect for you guys!I learn sameting new ...this video is more than a simple video.Thank you!
Man of everybody's woodshop that you get to see on the Internet this guy probably has the coolest shit in his shop
Man it's not that I can't have a Roughing planner it's where am I gonna put it
I'm talking like an old man I could make a room
Loved seeing the process, thanks for sharing!
That's beautiful flooring Sir, 👍😁🔨🎄🇺🇸🇮🇪
Holy crap that last machine that he ran Those boards threw
Super impressive
I'm looking right now at prices to buy me A roughing planner
look at 3 phase 220. you can get a MASSIVE work horse for real cheap. BUT you will need to get 3 phase to it. but you can get an inverter to turn single phase to 3 phasse pretty cheap all thigns considering
Hi from Canada. Great video. Great system you got there. I'm just getting ready to mill out some white ash . I'm wondering if I should quarter saw it or am I wasting my time. I'd like to go 6". Thanks again
Do you have to worry about "end matching" your boards so the ends lock together with the next piece?
I only see that about 50/50 on hardwood flooring. If your installer is a professional, and he works with clean, square, sharp tools he should be able to butt pieces together cleanly
I romobed 200 year old chestnut hardwood floors to level and lay a sub floor. How would I refurbish to put back down
I'm planning on doing this process for a small room in my home.
What is the purpose of the relief cuts on the back?
Are the relief cuts v-shaped or square?
What is the approximate size of the relief cuts?
Thank you!
I pretty sure it's done to prevent the warping and curling of the wood inwards, if so the shape of the cut shouldn't matter.
What is the name of that big cutting machine you are using?
what's the correct name for your work horse, Approximately what's the cost, Thanks .
ph260-planer-moulder/logosol-ph260-1-phase
is what it looks like
Partner I'm in California I got my house and 3 other houses at my family that wants Is hardwood flooring that I'm going to do
I've never done Hardwood flooring but I've done some roofing and I've helped frameI just for houses but for big elevated structural concrete
And my dad Is a pipe welder and the structure welder the structure welder that I was raised in that
Impossible I'd like to carve things out of wood so I figure what the hell what the hell I guess if I screw up it's an expensive screw up but I'd rather do it myself and have pay someone else to do itI would definitely give you a call