That RC kit for the frontier is 2.5 front and 1.5 rear... No? Not 2.5 on both axels, or u would still have tbe 1.5 inch rake from rear to front in a higher but factory stance.
I just had this exact level kit put on my 2017 Pro 4X. I had the front done only. After install the first speed bump I went over I had coil bucket contact. Any help on how to correct this? I don't want to have the kit removed. I like how it looks and it fits my Good Year duratrac much better. Also, I noticed the front is now about 3/4 inch higher than the rear. Will the kit settle at all? Thanks.
You need to upgrade to a aftermarket upper control arm, which will stop coil bucket contact. I'm guessing you have probably already figured this out by now.
We need nissan frontier pro4x nismo R lifited with kicker premium audio system and gtr nismo engine sv engine with nismo aftermarket parts like nismo cold air intake - nismo intercooler - nismo full exhaust system
@FlippinCustomized I put the rear frame on jack stands by the rear doors with the tires an inch in the air. I put a jackstand also under the rear differential (lowest setting.) Then put the floor jack under the hitch and jacked it up as much as I could, but the leafspring stays like 2 inches from the frame so I can't put the new , longer shackle in. =( should I take the jackstand out from under the rear diff? And let it drop lower? It's the only thing I can think of
Can you ask about the coil bucket contact?? Im looking to do the same thing but some people say the contact gets annoying abit but they say to put spc upper control arm to stop that.
@@loztsoul77 I just had this exact level kit put on my 2017 Pro 4X. I had the front done only. After install the first speed bump I went over I had coil bucket contact. I don't know much about replacing the upper control arm. You mentioned SPC? What brand is this? Where do I buy it? Thanks for the help.
Well I do hunting on logging roads I already replaced my uca with all dogs uca and replaced my camber bolts for the alignment but I still hear the metal puck clanking around so im going to upgrade to full shock and coil set up
So I bought this kit for my 2022 Pro-4X and noticed RC says it’s not for the Pro-4X, just for the SVs. Any idea why? I know someone else said they put one on their 2022 Pro-4X and have no problems.
P4x does have a factory lift already. Bilstein 4600 I believe... Almost 2" higher than the sv, s models. With the already 2" you'll definitely struggle with coil bucket contact but can be corrected with spc uca and minor grinding of the coil bucket close to the upper ball joint bushing
Thanks for making this video
🤙
When you did the rear shackles did you keep the OEM bushings in the frame mount and leaf spring or do you remove them to fit the spacer?
Reuse bushings
Thank you. My exact truck.
Great glad it helped out
That RC kit for the frontier is 2.5 front and 1.5 rear... No? Not 2.5 on both axels, or u would still have tbe 1.5 inch rake from rear to front in a higher but factory stance.
Correct more lift in front
I just had this exact level kit put on my 2017 Pro 4X. I had the front done only. After install the first speed bump I went over I had coil bucket contact. Any help on how to correct this? I don't want to have the kit removed. I like how it looks and it fits my Good Year duratrac much better. Also, I noticed the front is now about 3/4 inch higher than the rear. Will the kit settle at all? Thanks.
it has not yet as it uses the factory springs
You need to upgrade to a aftermarket upper control arm, which will stop coil bucket contact. I'm guessing you have probably already figured this out by now.
@@jonathantrumpower9316 Yes I have. Thank You.
update, surprisingly still no coil bucket contact
Great video! I’m going to do the same to my ‘22 Frontier 👍🏼
Thanks, nice man new body style
@@FlippinCustomized
V4 or V6?
Did you do yours yet? Had my 22 for a week now and im getting quotes on install
@@thebrainsack how much was it around
v6
What did you charge for this job? I have a 19 frontier I'm doing with the same kit in my shop today, didn't know what people charge. 🙃
3 hours
@@blueslime1703 I charge $70
Just got a 21sv with the same kit already installed. Also noticed it he as Bilstein shocks. Guessing they aren't stock, right?
Likely we’re added but nice upgrade
We need nissan frontier pro4x nismo R lifited with kicker premium audio system and gtr nismo engine sv engine with nismo aftermarket parts like nismo cold air intake - nismo intercooler - nismo full exhaust system
That’s it 😂💪
Nice job.
From what i uderstand you cant use spacer lifts without coil bucket contact ? How was the cbc?
Act this truck had none, it was close though
@Flippin Customized nice! Ive just ordered the koni lift. I ordered some high clearance ucas to adjust for that. Looks good.
So no rear shock replacement necessary with this amount of lift?
Not on this kit no
great vid thanks for the info
Thanks for watching
Why cant i get the leaf spring to drop far enough to get the new shackle in 😢?
Not sure what you’re saying
@FlippinCustomized I put the rear frame on jack stands by the rear doors with the tires an inch in the air. I put a jackstand also under the rear differential (lowest setting.) Then put the floor jack under the hitch and jacked it up as much as I could, but the leafspring stays like 2 inches from the frame so I can't put the new , longer shackle in. =( should I take the jackstand out from under the rear diff? And let it drop lower? It's the only thing I can think of
DID YOU USE EXTENDED BRAKE LINES?
No not required on this kit
I want to see a 2 1/2” front end level on a 2018 F150.
We can arrange that 😂
What larger size tires did he uprgrade to?
Oh man I’m not sure now he sold the truck
Can you ask about the coil bucket contact?? Im looking to do the same thing but some people say the contact gets annoying abit but they say to put spc upper control arm to stop that.
Customer has had no contact, but does not do much off roading
@@loztsoul77 I just had this exact level kit put on my 2017 Pro 4X. I had the front done only. After install the first speed bump I went over I had coil bucket contact. I don't know much about replacing the upper control arm. You mentioned SPC? What brand is this? Where do I buy it? Thanks for the help.
slow down on the speed bumps 😂 there are several companies and options out there, did you get an alignment too
Well I do hunting on logging roads I already replaced my uca with all dogs uca and replaced my camber bolts for the alignment but I still hear the metal puck clanking around so im going to upgrade to full shock and coil set up
So I bought this kit for my 2022 Pro-4X and noticed RC says it’s not for the Pro-4X, just for the SVs. Any idea why? I know someone else said they put one on their 2022 Pro-4X and have no problems.
Not sure, does the pro 4x have a factory lift?
@@FlippinCustomized No factory lift, no.
P4x does have a factory lift already. Bilstein 4600 I believe... Almost 2" higher than the sv, s models. With the already 2" you'll definitely struggle with coil bucket contact but can be corrected with spc uca and minor grinding of the coil bucket close to the upper ball joint bushing
You need to get an alignment afterwards correct
Yes always
@@FlippinCustomized will they be able to alone without Cam bolts
Align